T
Abbreviation for tera (1012). See International System of Units.
Select a term name to open its entry and any media references. Longer definitions end with a “Read More” link.
Loading results…
Abbreviation for tera (1012). See International System of Units.
See series T junction.
In Integrated Services Digital Networks (ISDN), the conceptual point dividing NT2 and NT1 functional groupings in a particular ISDN arrangement.
1. The generic designator for any of several digitally multiplexed telecommunications carrier systems.
Note 1: The designators for T-carrier in the North American digital hierarchy correspond to the designators for the digital signal (DS) level hierarchy. See the associated table below.
Note 2: T-carrier systems were originally designed to transmit digitized voice signals. Current applications also include digital data transmission.… (Read More →)
A passive optical coupler having three ports (three fibers).
Note 1: Two isolated inputs may be combined into one output; or one input, into two isolated outputs.
Note 2: The amount of coupling loss, usually expressed in dB, between ports is determined by the design and construction of the coupler. [After FAA] Synonyms directional coupler, splitter, tee coupler.
For basic rate access in an Integrated Services Digital Network (ISDN) environment, a user-to-network interface reference point that (a) is characterized by a four-wire, 144-kb/s (2B+D) user rate, (b) accommodates the link access and transport layer function in the ISDN architecture, (c) is located at the user premises, (d) is distance sensitive to the servicing network terminating equipment, and (e)… (Read More →)
Transport - Multi Protocol Label Switching
Transport Stream System Target Decoder (MPEG-2)
See T-carrier.
A full-duplex digital transmission facility that is composed of transmission media (optical or metallic) and regenerators that carry one DS1 signal. [After T1.408-1990]
See T-carrier.
See T-carrier.
See T-carrier.
See T-carrier.
See T-carrier.
Transport Authentication and Authorization Functional Entity
A transportable store-and-forward message-switching system used for rapid deployment in support of tactical forces.
The equipment, communications, procedures, and personnel essential to a commander for planning, directing, coordinating, and controlling tactical operations of assigned forces pursuant to assigned missions.
Communications in which information of any kind, especially orders and decisions, are conveyed from one command, person, or place to another within the tactical forces, usually by means of electronic equipment, including communications security equipment, organic to the tactical forces.
Note: Tactical communications do not include communications provided to tactical forces by the Defense Communications System (DCS), to nontactical military… (Read More →)
A communications system that (a) is used within, or in direct support of, tactical forces, (b) is designed to meet the requirements of changing tactical situations and varying environmental conditions, (c) provides securable communications, such as voice, data, and video, among mobile users to facilitate command and control within, and in support of, tactical forces, and (d) usually requires extremely… (Read More →)
A standardized communications link, approved by the Joint Staff, that is suitable for transmission of digital information, and is characterized by standardized message formats and transmission characteristics.
A netted link in which one unit acts as a net control station and interrogates each unit by roll call.
Note: Once interrogated, that unit transmits its data to the net. This means that each unit receives all the information transmitted. This is a direct transfer of data and no relaying is involved.
A point-to-point data link between two units which provides for simultaneous transmission and reception of data (duplex).
For the host service tactical forces, the total power requirements for communications, including the requirements for weapons, detection, command and control systems, and related support functions.
Note: The tactical load is a part of the operational load.
Acronym for tactical data information link.
Acronym for Tactical Automatic Digital Switching System.
See flag, label.
A file format used to store an image using the particular data structure of the file.
Abbreviation for International Atomic Time.
A communications line from the end of a major transmission link, such as a microwave link, satellite link, or LAN, to the end-user location.
Note: A tail circuit is a part of a user-to-user connection.
To gain unauthorized physical access by following an authorized person through a controlled door. [2382-pt.8]
In facsimile systems, the excessive prolongation of the decay of the signal. Synonym hangover.
See clip.
Synonym departure angle.
1. In INFOSEC, penetration or modification of internal operations, or the insertion of active or passive tapping mechanisms, to determine the nature of, or monitor or record , e.g., secret data. [After X9.24]
2. Unauthorized modification altering the proper functioning of INFOSEC equipment. [INFOSEC-99]
3. Unauthorized modification of sensitive systems or sensitive information.
1. Pertaining to an arrangement or sequencing of networks, circuits, or links, in which the output terminals of one network, circuit, or link are connected directly to the input terminals of another network, circuit, or link.
Note: For example, concatenated microwave links constitute a tandem connection.
2. A switching system in the message network that establishes trunk-to-trunk connections. Tandems may… (Read More →)
The general areas served by the local offices having direct trunks to or from the tandem office. This area may consist of one or more communities or may include only a portion of a relatively large city. [47 CFR Pt.36-A]
In a switched public telecommunications network, a facility that connects trunks to trunks and does not connect any local loops.
A general classification of circuits or trunks between a tandem central office unit and any other central office or switchboard. Synonym tandem trunk. [47 CFR Pt.36-A]
A call switched at a tandem office. [47 CFR Pt.36-A]
A central office unit used primarily as an intermediate switching point for traffic between local central offices within the tandem area. Where qualified by a modifying expression, or other explanation, this term may be applied to an office employed for both the interconnection of local central offices within the tandem area and for the interconnection of these local offices with… (Read More →)
An arrangement that permits sequential connection of tie trunks between PBX and Centrex® locations by using tandem operation.
Note: Tandem operation permits two or more dial tie trunks to be connected at a tandem center to form a through connection.
Synonym tandem circuit.
1. To draw energy from a circuit.
2. To monitor, with or without authorization, the information that is being transmitted via a communications circuit.
3. To extract a portion of the signal from an optical fiber or communications link.
Note: One method of tapping an optical fiber is to bend it to a relatively short radius, thus promoting radiation of… (Read More →)
A method of retransmitting TTY traffic from one channel to another, in which messages arriving on an incoming channel are recorded in the form of perforated tape, this tape then being either fed directly and automatically into an outgoing channel, or manually transferred to an automatic transmitter for transmission on an outgoing channel.
An optical fiber in which the cross section, i.e., cross-sectional diameter or area, varies, i.e., increases or decreases, monotonically with length.
An entity to which access may be attempted [10181-3].
ADI associated with the target [10181-3].
Access control information relating to the target [10181-3].
In computing, data processing, and communications systems, a language into which statements are translated.
Note: Translators, assemblers, and compilers prepare target language programs, usually machine-language programs, from source language programs, usually high-level language programs written by programmers.
1. A product or system to be evaluated [CESG].
2. An ITSEC system or product which is subject to security evaluation [ITSEC].
The published schedule of rates or charges for a specific unit of equipment, facility, or type of service such as might be provided by a telecommunications common carrier.
Acronym for time-assignment speech interpolation.
See multitasking.
Abbreviation for transatlantic telecommunications (cable).
Note: TAT formerly stood for transatlantic telephone (cable).
Terrestrial Beacon System
Technical Committee
Transaction Capabilities Application Part
Abbreviation for trusted computing base.
Set of software, firmware, and hardware (where any of these three could be absent) that mediates the access of a set S of subjects to a set O of objects on the basis of a stated access mediation policy P and satisfies the properties: (1) M mediates every access to objects in O by subjects in S; (2) M is… (Read More →)
Abbreviation for technical control facility.
Abbreviation for Transmission Control Protocol. In the Internet Protocol suite, a standard, connection-oriented, full-duplex, host-to-host protocol used over packet-switched computer communications networks.
Note 1: TCP corresponds closely to the ISO Open Systems Interconnection--Reference Model (OSI--RM) Layer 4 (Transport Layer).
Note 2: The OSI--RM uses TP-0 or TP-4 protocols for transmission control.
Abbreviation for Transmission Control Protocol/Internet Protocol. Two interrelated protocols that are part of the Internet protocol suite.
Note 1: TCP operates on the OSI Transport Layer and breaks data into packets. IP operates on the OSI Network Layer and routes packets.
Note 2: TCP/IP was originally developed by the U. S. Department of Defense.
A redesigned TCP/IP protocol stack with an integrated version of both Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (Ipv6).
The suite of interrelated protocols associated with Transmission Control Protocol/Internet Protocol.
Note 1: The TCP/IP Suite includes, but is not limited to, protocols such as TCP, IP, UDP, ICMP, FTP, and SMTP.
Note 2: Additional application and management protocols are sometimes considered part of the TCP/IP Suite. This includes protocols such as SNMP.
Abbreviation for trusted computer system.
Abbreviation for teletypewriter control unit.
1. Telecommunications Device for the Deaf,
2. Time Division Duplex.
Abbreviation for time-division multiplexing.
Abbreviation for time-division multiple access.
1. Time-Domain Reflectometer,
2. Telecommunications for Disaster Relief.
1. Transverse Electric. See Transverse Electric Mode,
2. Terminal Equipment.
In the military community, an area in which temperature, humidity, or access is controlled because it contains equipment, such as communications, computing, control, or support equipment, that requires such controls.
A physical plant, or a designated and specially configured part thereof, that (a) contains the equipment necessary for ensuring fast, reliable, and secure exchange of information, (b) typically includes distribution frames and associated panels, jacks, and switches and monitoring, test, conditioning, and orderwire equipment, and (c) allows telecommunications systems control personnel to exercise operational control of communications paths and facilities,… (Read More →)
Synonym data conferencing repeater.
The portion of the operational load required for communications, tactical operations, and ancillary equipment including necessary lighting, air-conditioning, or ventilation required for full continuity of communications.
The set of laws, rules and practices regulating the processing of sensitive information and the use of resources by the hardware and software of an ITSEC system or product [ITSEC].
In information handling, a hardware, software, or firmware weakness, or design deficiency, that leaves a system open to assault, harm, or unauthorized exploitation, either externally or internally, thereby resulting in unacceptable risk of information compromise, information alteration, or service denial.
A standing committee of the ATIS Board of Directors, the Technology and Operations Council identifies the industry's most pressing technical and operational priorities, and coordinates standardization efforts across the industry to produce interoperable, implementable, end-to-end solutions.
Abbreviation for trunk encryption device.
A passive coupler that has three ports. Synonyms directional coupler, splitter, T-coupler.
Telecommunications Energy Efficiency Rating
Abbreviation for traffic encryption key.
Telecommunications Company
In Integrated Services Digital Network (ISDN) applications, a telecommunications service that uses very short messages with very low data transmission rates between the user and the network.
The Telecom Management and Operations Committee (TMOC) develops operations, administration, maintenance and provisioning standards, and other documentation related to Operations Support System (OSS) and Network Element (NE) functions and interfaces for communications networks - with an emphasis on standards development related to U. S. communication networks in coordination with the development of international standards.
The use of telecommunication for the transmission of signals to initiate, modify or terminate functions of equipment at a distance. [NTIA] [RR]
1. Any transmission, emission, or reception of signs, signals, writing, images and sounds or intelligence of any nature by wire, radio, optical or other electromagnetic systems. [NTIA] [RR]
2. Any transmission, emission, or reception of signs, signals, writings, images, sounds, or information of any nature by wire, radio, visual, or other electromagnetic systems. [JP 1-02]
An administration, or the part of a combined postal and telecommunication administration, concerned with the provision of telecommunication service. [T1.226-1992]
See network architecture.
The sector that includes the telecommunications service providers, network operators, regulators, manufacturers, subscribers, and users. [After T
1. Rpt30-1994]
See communications center.
A machine that uses typed input and output, usually with a visual text display, to enable individuals with hearing or speech impairments to communicate over a telecommunications network.
The aggregate of equipment, such as radios, telephones, teletypewriters, facsimile equipment, data equipment, cables, and switches, used for providing telecommunications services.
The organizations, personnel, procedures, facilities, and networks employed to transmit and receive information by electrical or electronic means.
Note 1: Telecommunications facilities include, but are not necessarily limited to, terrestrial radio, metallic and optical fiber cables, artificial Earth satellite communications, radio and television stations (traditional broadcast as well as cable and satellite broadcast), public switched telephone network(s), etc.
Note 2:… (Read More →)
A communications facility or channel, including feeder and local distribution plant, having a termination in a center in the telecommunications network. Examples of such a link include (but are not necessarily restricted to): optical-fiber cable, coaxial cable, metallic cables, transmitting and receiving antenna. [After T1.328-1995]
Equipment powered from a primary or secondary distribution of a centralized dc power system owned or operated by exchange and interexchange carriers. [After T1.330-1997]
A network that interfaces with a telecommunications network at several points in order to receive information from, and to control the operation of, the telecommunications network.
Note: A TMN may use parts of the managed telecommunications network to provide for the TMN communications.
See communications security.
1. Any service provided by a telecommunication provider.
2. A specified set of user-information transfer capabilities provided to a group of users by a telecommunications system.
Note: The telecommunications service user is responsible for the information content of the message. The telecommunications service provider has the responsibility for the acceptance, transmission, and delivery of the message.
In the Telecommunications Service Priority program, the level that may be assigned to an NS/EP telecommunications service, which specifies the order in which provisioning or restoration of the service is to occur relative to other NS/EP or non-NS/EP telecommunication services.
Note: Priority levels authorized are designated (highest to lowest) "E," "1," "2," "3," "4," and "5" for provisioning and "1,"… (Read More →)
The priority level(s) designated for the provisioning or restoration of a particular NS/EP telecommunications service.
A United States Government program that provides a means for telecommunications users to obtain priority treatment from service providers to meet NS/EP telecommunications requirements.
Note: The TSP program replaced the Restoration Priority (RP) program effective September 1990.
Any individual, organization, or activity that interacts with the NS/EP TSP Program.
Telecommunications Service Priority (TSP) is an FCC regulated service provided by a telecommunications provider, such as an operating telephone company or a carrier, for NS/EP telecommunications.
Note: The TSP service replaced Restoration Priority (RP) service effective September 1990.
See communications system.
The organization responsible for providing telecommunications services to users.
The live exchange of information among persons and machines remote from one another but linked by a telecommunications system.
Note: The telecommunications system may support the teleconference by providing audio, video, and data services by one or more means, such as telephone, telegraph, teletype, radio, and television.
Written matter intended to be transmitted by telegraphy for delivery to the addressee. This term also includes radiotelegrams unless otherwise specified. In this definition the term telegraphy has the same general meaning as defined in the [1979 General Worldwide Administrative Radio Conference] Convention. [RR with editor's note in brackets]
See telegraphy.
A form of telecommunication which is concerned in any process providing transmission and reproduction at a distance of documentary matter, such as written or printed matter or fixed images, or the reproduction at a distance of any kind of information in such a form. For the purposes of the Radio Regulations, unless otherwise specified therein, telegraphy shall mean a form… (Read More →)
1. The use of telecommunication for automatically indicating or recording measurements at a distance from the measuring instrument. [RR]
2. The transmission of nonvoice signals for the purpose of automatically indicating or recording measurements at a distance from the measuring instrument. [47 CFR
9
0. 7]
Synonym central office.
See audio frequency, voice frequency.
The unique network address that is assigned to a telephone user, i.e., subscriber, for routing telephone calls.
A DNS-based architecture in which an E.164 number (i.e., as defined by the ITU) can be expressed as a fully qualified domain name.
Synonym sidetone.
1. The branch of science devoted to the transmission, reception, and reproduction of sounds, such as speech and tones that represent digits for signaling.
Note 1: Transmission may be via various media, such as wire, optical fibers, or radio.
Note 2: Analog representations of sounds may be digitized, transmitted, and, on reception, converted back to analog form.
Note 3: "Telephony"… (Read More →)
Pertaining to pictures transmitted via a telecommunications system.
A teletypewriter that can only receive data and does not have a keyboard for transmission.
The combining of telecommunications and computer operations interacting in the automatic processing, reception, and transmission of data and/or information. [JP 1-02]
Note: Teleprocessing includes human-machine interface equipment.
See teletraining.
See telecommunications service.
An international store-and-forward essentially error-free communications service that is defined by the CCITT (now the ITU-T), has a data signaling rate (DSR) of 2400 b/s over switched telephone networks, and has a communications protocol that supports the CCITT Group 4 facsimile service.
A type of one-way information service in which a subscriber can receive data on a video display.
Note: The information is transmitted to the subscriber's video display over a common carrier channel. A proprietary video adapter unit is required for reception. Contrast with viewdata.
Training that (a) in which usually live instruction is conveyed in real time via telecommunications facilities, (b) that may be accomplished on a point-to-point basis or on a point-to-multipoint basis, and (c) may assume many forms, such as a teleseminar, a teleconference, or an electronic classroom, usually including both audio and video. Synonyms distance learning, distance training, electronic classroom, virtual… (Read More →)
A printing telegraph instrument that has a signal-actuated mechanism for automatically printing received messages.
Note 1: A TTY may have a keyboard similar to that of a typewriter for sending messages.
Note 2: Radio circuits carrying TTY traffic are called "RTTY circuits" or "RATT circuits. "
A device that controls and coordinates operations between teletypewriters and message switching centers.
A switched teletypewriter service in which suitably arranged teletypewriter stations are provided with lines to a central office for access to other such stations.
The shifting of signal pulse transitions from their proper positions relative to the beginning of the start pulse.
Note: The magnitude of the distortion is expressed in percent of a perfect unit pulse length. Synonym start-stop TTY distortion.
A form of telecommunication for the transmission of transient images of fixed or moving objects. [NTIA] [RR] [47CFR]
Note 1: The picture signal is usually accompanied by the sound signal.
Note 2: In North America, TV signals are generated, transmitted, received, and displayed in accordance with the NTSC/ATSC standard.
See translator.
A communication service involving teletypewriters connected through automatic exchanges.
The TCP/IP standard network virtual terminal protocol that is used for remote terminal connection service and that allows a user at one site to interact with systems at other sites as if that user terminal were directly connected to computers at those sites.
Abbreviation for transverse electric and magnetic mode.
1. [A] Short name referring to investigation, study, and control of compromising emanations from information systems (IS) equipment. [INFOSEC-99]
2. To shield against compromising emanations.
3. The unintentional radiation or conduction of compromising emanations from communications, non-communications and/or computer systems [CESG]. See also: Radiation Security.
4. The study and control of spurious electronic signals emitted from ADP equipment [TCSEC]. TEMPEST… (Read More →)
A video application requiring high temporal resolution, i.e., reduced jerkiness, possibly at the expense of reduced spatial resolution.
Note: An example of temporal applications is the ability to accurately discern moving image features such as facial expressions and lip movements.
See coherent.
In a video display, that form of edge busyness that is characterized by time-varying sharpness at the edges of objects.
See coherence time.
A number dynamically assigned on a per call basis by the serving wireless service provider to a roaming subscriber for the purpose of incoming call setup. See âAdministrative Numbersâ definition
A unit denoting one trillion (1012) hertz.
A device capable of sending, receiving, or sending and receiving information over a communications channel.
A host computer that accepts terminal connections, usually from dial-up lines, and that allows the user to invoke Internet remote log-on procedures, such as Telnet.
An interfacing device employed at the "R" reference point in an ISDN environment that allows connection of a non-ISDN terminal at the physical layer to communicate with an ISDN network.
Note: Typically, a terminal adapter will support standard RJ-11 telephone connection plugs for voice and RS-232C, V.35 and RS-449 interfaces for data.
Data maintained for each terminal including the current terminal location (and capabilities). [T1.244-1995]
The process by which a wireless terminal's previous location registration is canceled. [T1.702-1995] [T
1. Rpt34-1994]
A functional group that includes functions broadly belonging to Layer 1 and higher layers of the ITU-T Recommendation X.200 Reference Model.
Note 1: The functions of a TE functional group are performed on various types of equipment, or combinations of equipment, such as digital telephones, data terminal equipment, and/or integrated work stations.
Note 2: Examples of TE functions are protocol-handling,… (Read More →)
1. Communications equipment at either end of a communications link, used to permit the stations involved to accomplish the mission for which the link was established.
2. In radio-relay systems, equipment used at points where data are inserted or derived, as distinct from equipment used only to relay a reconstituted signal.
3. Telephone and telegraph switchboards and other centrally located… (Read More →)
A code identifying a specific terminal. [T
1. Rpt34-1994]
1. The impedance as measured at the unloaded output terminals of transmission equipment or a line that is otherwise in normal operating condition.
2. The ratio of voltage to current at the output terminals of a device, including the connected load.
In commercial wireless networks, the ability of a terminal, while in motion, to access telecommunication services from different locations, and the capability of the network to identify and locate that terminal.
A device that provides the control logic for terminal authentication, location management, alerting, and routing to radio personal terminal / radio terminations (RPT/RTs). [After T1.244-1995]
In personal communications service (PCS), (a) providing authentication of terminal information, (b) maintaining terminal location and capability information for each terminal, and (c) providing translation between terminal identification and location (routing address) for the completion of calls to terminals.
The process of associating a terminal with a terminal registration area. [T
1. Rpt34-1994]
A territory in which a wireless terminal is registered for terminal mobility.
Note: For T1 Technical Report 34, the alerting area may or may not be identical to the terminal registration area. [T
1. Rpt34-1994]
Information that the service provider maintains for a given user to characterize the services offered by the network to that user. A TSP may be allocated to an interface or to a particular user equipment or a group of user equipment. [T1.653-1996]
The variety of terminal or the originator (e.g., dual-tone multifrequency (DTMF) phone, ISDN terminal). [After T1.667-1999]
In a wideband packet node, the part of the node that receives packetized traffic, depacketizes it, and then plays it back as channelized traffic. [T1.509-1995]
Of a UPT call, any network function associated with the termination of the call to the destination terminal. [After T
1. Rpt41-1995]
1. The load connected to a transmission line, circuit, or device.
Note: For a uniform transmission line, if the termination impedance is equal to the characteristic impedance of the line, wave reflections from the end of the line will be avoided. [From Weik '89]
2. In hollow metallic waveguides, the point at which energy propagating in the waveguide continues in… (Read More →)
A device used to terminate, position, and hold an optical fiber within a connector.
A signal that can assume, at any given instant, one of three significant conditions, such as power level, phase position, pulse duration, or frequency.
Note: Examples of ternary signals are (a) a pulse that can have a positive, zero, or negative voltage value at any given instant, (b) a sine wave that can assume phases of 0°, 120°, or 240°… (Read More →)
A network of terrestrial beacon signal transmitters that enable a receiver's position to be determined. TBS is included in the LTE Positioning Protocol (LPP) 3GPP TS
3
6. 355 starting with Release 13.
Any radiocommunication other than space radiocommunication or radio astronomy. [NTIA] [RR] [47CFR]
A station effecting terrestrial radiocommunication. [47CFR] In these [Radio] Regulations, unless otherwise stated, any station is a terrestrial station. [NTIA] [RR]
Timed Efficient Stream Loss-tolerant Authentication
Physical measurements taken (a) to verify conclusions obtained from mathematical modeling and analysis or (b) for the purpose of developing mathematical models.
An antenna of known performance characteristics used in determining transmission characteristics of equipment and associated propagation paths.
See patch and test facility, technical control facility.
Key intended for testing of COMSEC equipment or systems. [INFOSEC-99]
A point within a piece of equipment or an equipment string that provides access to signals for the purpose of fault isolation.
A tone sent at a predetermined level and frequency through a transmission system for test purposes, such as for facilitating measurements and for aligning gains and losses in the system.
The contact person who coordinates the updating and distribution of testline information for their company and is responsible for providing testline information to the industry.
Synonym word processing.
The authoritative source of text enablement and routing information for all multimedia services associated with Toll-Free Numbers.
Task Force
Trivial File Transfer Protocol
Abbreviation for telegraph. See telegraphy.
Abbreviation for trunk group multiplexer.
Abbreviation for total harmonic distortion.
The noise generated by thermal agitation of electrons in a conductor. The noise power, P, in watts, is given by P = kTf, where k is Boltzmann's constant in joules per kelvin, T is the conductor temperature in kelvins, and f is the bandwidth in hertz.
Note 1: Thermal noise power, per hertz, is equal throughout the frequency spectrum, depending… (Read More →)
1. Electromagnetic radiations emitted from a heat or light source as a consequence of its temperature; it consists essentially of ultraviolet, visible, and infrared radiations. [JP1]
2. The heat and light produced by a nuclear explosion. [JP1]
A measure, in kelvins (K), proportional to the thermal energy of a given body at equilibrium.
Note 1: A temperature of 0 K is called "absolute zero," and coincides with the minimum molecular activity (i.e., thermal energy) of matter.
Note 2: Thermodynamic temperature was formerly called "absolute temperature. "
Note 3: In practice, the International Temperature Scale of 1990 (ITS-90)… (Read More →)
Abbreviation for tremendously high frequency. See electromagnetic spectrum.
A server-centric computing model in which the application software, data, and CPU power resides on a network server rather than on the client computer(s).
Note 1: This computing philosophy allows administrators to purchase one relatively powerful and expensive server and be confident that any external terminal, regardless of its power or sophistication, can run applications on the server. Most "shopping"… (Read More →)
Computer programs that reside on a server and react to external requests from a client.
Note: This is in contrast to software that is installed on each client computer in a network. Software that resides only on a single server can be maintained and updated with minimal effort.
A laser that is constructed by thin-film deposition techniques on a substrate for use as a light source, is usually used to drive thin-film optical waveguides, and may be used in integrated optical circuits.
A modulator that consists of multilayered films of material of different optical characteristics, is capable of modulating transmitted light by using electro-optic, electro-acoustic, or magneto-optic effects to obtain signal modulation, and may be used as a component in integrated optical circuits. [From Weik '89]
A multiplexer that consists of multilayered films of material of different optical characteristics, is capable of multiplexing transmitted light by using electro-optic, electro-acoustic, or magneto-optic effects to obtain signal multiplexing, and may be used as a component in integrated optical circuits. [From Weik '89]
A switch that consists of multilayered films of material of different optical characteristics, that is capable of switching transmitted light by using electro-optic, electro-acoustic, or magneto-optic effects to obtain signal switching, and is usually used as a component in integrated optical circuits.
Note: Thin-film optical switches may support only one propagation mode. [From Weik '89]
A slab-dielectric waveguide that consists of multilayered films of material of different optical characteristics, is capable of guiding an optical signal, and may be used as a component in integrated optical circuits. [From Weik '89]
Of silica-based optical fibers, the transmission window at approximately
1. 55 m.
Note: The third window is the minimum-loss window in silica-based fibers. [After FAA]
A point (a) that is an extrapolated convergence--not directly measurable--of intermodulation distortion products in the desired output and (b) that indicates how well a receiver performs in the presence of strong nearby signals.
Note: Determination of a third-order intercept point is accomplished by using two test frequencies that fall within the first intermediate frequency mixer passband. Usually, the test frequencies… (Read More →)
A range of one thousand telephone numbers within an NPA-NXX beginning with X000 and ending with X999, where X is a value from 0 to 9.
Thousands-block number pooling is a process by which the 10,000 numbers in a central office code (NXX) are separated into ten sequential blocks of 1,000 numbers each (thousands-blocks), and allocated separately within a rate center (FCC 00-104 §5
2. 20 (a)).
1. In computer conferencing, a set of sequential messages containing closely related information. [After 2382-pt.35] Synonyms discussion thread, followup.
2. A single flow of control within a process [POSIX.0].
1. Capabilities, intentions, and attack methods of adversaries to exploit, or any circumstance or event with the potential to cause harm to, information or an information system. [NIS]
2. Any circumstance or event with the potential to harm an information system (IS) through unauthorized access, destruction, disclosure, modification of data, and/or denial of service. [INFOSEC-99]
3. The likelihood of an… (Read More →)
Examination of information to identify the elements comprising a threat. [INFOSEC-99]
[A] formal description and evaluation of threat to an information system (IS). [INFOSEC-99]
Synonym triplet.
A switching system service feature that permits users to add a third party at a different number during a call, without the assistance of an attendant.
1. The minimum value of a signal that can be detected by the system or sensor under consideration.
2. A value used to denote predetermined levels, such as those pertaining to volume of message storage, i.e., in-transit storage or queue storage, used in a message switching center.
3. The minimum value of the parameter used to activate a device.
4.… (Read More →)
In a laser, the driving current corresponding to lasing threshold.
See FM threshold extension.
In opto-electronics, the frequency of incident radiant energy below which there is no photo-emissive effect.
A group of 12 voice-frequency channels transmitted as a unit through a carrier system.
An aggregate of 60 voice-frequency channels, i.e., five groups, transmitted as a unit through a carrier system.
In carrier telephone transmission, equipment that accepts the signal from a group receiver output and attenuates it to the proper signal level for insertion, without frequency translation, at the input of a group transmitter.
In carrier telephone transmission, equipment that accepts the multiplexed signal from a supergroup receiver output, amplifies it without frequency translation, and provides the proper signal level to the input of a supergroup transmitter equipment.
1. The number of bits, characters, or blocks passing through a data communication system, or portion of that system.
Note 1: Throughput may vary greatly from its theoretical maximum.
Note 2: Throughput is expressed in data units per period of time; e.g., in the DDN, as blocks per second.
2. The maximum capacity of a communications channel or system.
3.… (Read More →)
Abbreviation for terahertz. See electromagnetic spectrum.
Abbreviation for Telecommunications Industry Association. See EIA interface.
In computer security, a representation of one or more access rights that a possessor has to an object.
Note: The ticket represents an access permission. [2382-pt.8]
[In security, a] computer protection system in which each subject maintains a list of unforgeable bit patterns called tickets, one for each object a subject is authorized to access. [INFOSEC-99]
A call for which a record is made of certain facts concerning the call, such as the time it was placed, the duration, the call originator, call destination numbers, and, where applicable, the attendant's name or initials. [From Weik '89]
Acronym for time interval error.
See tie trunk.
A telephone line that directly connects two private branch exchanges (PBXs).
Telecom Information Exchange Services
Acronym for tag image file format.
See buffer.
See block distortion.
1. An epoch, i.e., the designation of an instant on a selected time scale, astronomical or atomic. It is used in the sense of time of day [JP1]
2. On a time scale, the interval between two events, or the duration of an event.
3. An apparently irreversible continuum of ordered events.
4. That which characterizes, or is characterized by,… (Read More →)
The level of agreement of the time of a clock compared to an ideal source of time such as coordinated universal time (UTC time). This is specified as the magnitude of the time offset from the ideal source:
Time accuracy = |t ti|
where:
t = the time from the clock in question
ti = the ideal time
A situation in which more than one different time or time measurement can be obtained under the stated conditions.
Synonym circuit reliability.
An arbitrary grouping of several consecutive hours of a day, usually for a particular season, during which it is assumed that propagation data are statistically homogeneous.
1. In COMSEC, a logic bomb to be activated at a predetermined time. [2382-pt.8]
2. [A] resident computer program that triggers an unauthorized act at a predefined time. [INFOSEC-99]
A code used for the transmission and identification of time signals.
Note: In telecommunications systems, the format of the time code must be specified.
The shortest interval between successive repetitions of the same time code value.
Note: For example, in a time code in which year-of-century is the most slowly changing field, the time code ambiguity would be 100 years; for a digital clock in which hours and minutes up to a maximum of 11:59 are displayed, the time code ambiguity would be 12… (Read More →)
The interval between two successive time code states.
Note: Time code resolution is determined by the most rapidly changing symbol position within the time code. For example, for a digital clock that displays hours and minutes, the time code resolution would be 1 minute.
The interval required for a system or circuit to change a specified fraction from one state or condition to another.
Note 1: The time constant is used in the expression where A(t) is the value of the state at time t, A(0) is the value of the state at time t = 0, a is the time constant, and t… (Read More →)
Transmission in which signals representing the same information are sent over the same channel at different times.
Note: Time diversity is often used over systems subject to burst error conditions, and at intervals adjusted to be longer than an error burst.
See time-division multiplexing.
A time interval left vacant on a channel to provide a margin of safety against intersymbol interference in the time domain between sequential operations, such as detection, integration, differentiation, transmission, encoding, decoding, or switching.
The fluctuation of the time interval error caused by the instability of a real clock.
1. The time difference between a real clock and an ideal uniform time scale, after a time interval following perfect synchronization between the clock and the scale.
2. The variation in time delay of a given timing signal with respect to an ideal timing signal over a particular time period. [T1.101-1987]
Short-term variation or instability in the duration of a specified time interval.
A reference signal, often repeated periodically, enabling the correlation of specific events with a time scale, such as for establishing synchronization.
The date of an event, i.e., the instant an event occurs, with reference to a specified time scale.
1. A time measuring system defined to relate the passage of temporal events since a selected epoch.
Note: The internationally recognized time interval is the second. Time scales are graduated in intervals such as seconds, minutes, hours, days, and years, and in fractions of a second, such as milliseconds, nanoseconds, and picoseconds.
2. Time coordinates placed on the abscissa (x-axis)… (Read More →)
A multiplier used to transform the real time of occurrence of an event or a problem into system time, such as that of a telecommunications system or a computer.
The server maintaining and distributing the correct date and time over a computer network.
Note: There is usually a special time-distribution protocol. [2382-pt.35]
1. Period of time during which certain activities are governed by specific regulations. [JP1]
2. A time interval that can be recognized and uniquely defined.
1. A data field in which is recorded (typically with a resolution of 1 millisecond) the cumulative variable queuing delay experienced by a packet in traversing the network. [After T1.509-1995]
2. With respect to a recorded network event, a data field in which is recorded the time (time of day or other instant of elapsed time) at which the event… (Read More →)
A stable device that emits signals at equal intervals such that their count may be used as a clock.
A time mark output of a clock system.
An analog technique used on certain long transmission links to increase voice-transmission capacity.
Note: TASI works by switching additional users onto any channel temporarily idled because an original user has stopped speaking. When the original user resumes speaking, that user will, in turn, be switched to any channel that happens to be idle.
The identical hour each day during which, over a number of days, the highest average traffic is measured. [T
1. Rpt 11-1991]
Synonym delay distortion.
See time-division multiplexing.
1. A communications technique that uses a common channel (multipoint or broadcast) for communications among multiple users by allocating unique time slots to different users.
Note: TDMA is used extensively in satellite systems, local area networks, physical security systems, and combat-net radio systems.
2. A multiple access technique whereby users share a transmission medium by being assigned and using (one… (Read More →)
1. Digital multiplexing in which two or more apparently simultaneous channels are derived from a given frequency spectrum, i.e., bit stream, by interleaving pulses representing bits from different channels.
Note: Successive pulses represent bits from successive channels, e.g., voice channels in a T1 system.
2. A multiplexing technique whereby two or more channels are derived from a transmission mediuim by… (Read More →)
Switching of time-division multiplexed (TDM) channels by shifting bits between time slots in a TDM frame.
An electronic instrument used to characterize and locate faults in metallic cables (e.g., twisted pair, coax).
Note 1: A TDR transmits a fast rise time pulse along the conductor. The resulting reflected pulse is measured at the input as a function of time and displayed on the instrument or plotted, as a function of cable length.
Note 2: A TDR… (Read More →)
Direct-sequence spread spectrum where the transmitter is on only for a short fraction of a time interval. The on-time can be periodic or random within a time interval. [NTIA]
1. A network parameter related to an enforced event designed to occur at the conclusion of a predetermined elapsed time.
2. A specified period of time that will be allowed to elapse in a system before a specified event is to take place, unless another specified event occurs first; in either case, the period is terminated when either event takes… (Read More →)
1. The interleaving of two or more independent processes on one functional unit.
2. Pertaining to the interleaved use of computer time that enables two or more users to execute programs concurrently.
In cryptography, a value that changes with each transaction or with each message value. [After X9.19]
See responsiveness.
Synonym timing recovery.
The short-term variations of the significant instants of a digital signal from their ideal positions in time. Here short term implies phase oscillations of frequency greater than or equal to 10 Hz. Timing jitter may lead to crosstalk and/or distortion of the original analog signal and is a potential source of slips at the input ports of digital switches. It… (Read More →)
The derivation of a timing signal from a received signal. Synonym timing extraction.
1. The output of a clock.
2. A signal used to synchronize interconnected equipment.
A measure of the ability of a timing synchronization system to minimize the clock difference between a master clock and any slaved clock.
Telecommunications and Internet Converged Services & Protocol for Advance Networks
Abbreviation for telemetry.
Transport Location Management Functional Entity
Abbreviation for transmission level point.
Transport Layer Security
Abbreviation for transverse magnetic. See transverse magnetic mode.
Time Measurement and Analysis Service from NIST
TeleManagement Forum
Telecommunications Markup Language
A data structure representing a service type (a generic representation of a registered service) in the Universal Description, Discovery, and Integration registry.
Test Message Query
Test Message Response
Abbreviation for time of day. See time of occurrence.
In certain local-area-network protocols, a group of bits that serves as a symbol of authority, is passed among data stations, and is used to indicate the station that is temporarily in control of the transmission medium.
A network access procedure in which a token passes from station to station and the only station allowed to transmit information is the station with the token.
A network interface card (NIC) designed to attach a client workstation to a token ring computer network and operate as a token-passing interface.
A bus network in which a token passing procedure is used.
See network topology.
The permissible range of variation of some characteristic from its nominal value.
The region between two curves, such as circles or rectangles, used to specify the tolerance on component size and geometry. 2. Pertaining to the cross section of an optical fiber, when used to specify the respective diameters and ovalities of, and concentricity error between, the core and cladding; two concentric annular regions which define the core-cladding boundary and the cladding… (Read More →)
See long-distance call.
An office (or group of offices) within a city which generally handles the originating and incoming toll traffic for that city to or from other toll center areas and which handles through switched traffic. The toll center normally handles the inward toll traffic for its tributary exchanges and, in general, either handles the outward traffic originating at its tributaries or… (Read More →)
The areas served by a toll center, including the toll center city and the communities served by tributaries of the toll center. [47 CFR Pt.36-A]
A toll office (as contrasted to a local office) in a toll center city. [47 CFR Pt.36-A]
A general term applied to interexchange trunks used primarily for toll traffic. [47 CFR Pt.36-A]
A general classification of trunks carrying toll traffic and ordinarily extending between a local office and a toll office, except trunks classified as tributary circuits. Examples of toll connecting trunks include toll switching trunks, recording trunks, and recording-completing trunks. [47 CFR Pt.36-A]
A system service feature by which users are denied the ability to place toll calls without the assistance of an attendant.
The FCC Order that provided the customer with the ability to retain his Toll-Free Number and move or select carrier(s) of choice to service that same Toll-Free Number.
The entity which subscribes to Toll-Free Service from the Toll-Free Service Provider. This entity defines and manages all final termination points for the Toll-Free Service, and takes ultimate financial responsibility for tariff usage charges resulting from callers dialing the Toll-Free Number. NOTE: The Toll-Free Subscriber definition specifically excludes Toll-Free Service Resellers with respect to all situations of Resold Toll-Free Service… (Read More →)
A central office used primarily for supervising and switching toll traffic. [47 CFR Pt.36-A]
The voice quality resulting from the use of a nominal 4-kHz telephone channel.
Note: Toll quality may be quantized in terms of a specified bit error ratio.
See classmark.
A trunk connecting one or more end offices to a toll center as the first stage of concentration for intertoll traffic.
Note: Operator assistance or participation may be an optional function. In U. S. common carrier telephony service, a toll center designated "Class 4C" is an office where assistance in completing incoming calls is provided in addition to other traffic;… (Read More →)
Any authorized representative of a Toll-Free Subscriber or a Toll-Free Service Provider. The Agent is the entity whom the Toll-Free Subscriber or the Toll-Free Service Provider has contractually authorized to act on its behalf to establish, change, or disconnect Toll-Free Service.
An entity that offers Bundled Service to Toll-Free Subscribers.
An entity that purchases services from a Resp Org, a Toll-Free Subscriber, a Toll-Free Service Provider, or an Agent of any of these entities.
A 10-digit telephone number, currently beginning with the NPA of 800, 888, 877, 866, 855, 844, or 833 (As of June 3, 2017), where the receiving party incurs any call routing charges. A Toll-Free Number can exist in a status of Spare, Reserved, Assigned, Working, Disconnect, Transitional, Suspend, and Unavailable.
A Toll-Free Number created by a contractual relationship between a Toll-Free Bundled Service Provider and its customer, where one or more Toll-Free Numbers have been bundled (packaged) by the provider with other services (e.g., advertising, answering services, product fulfillment, SMS messaging, and others).
A Toll-Free Number held by Toll Free Subscribers who do not have a year-round need for the number.
A Toll-Free number for which the letters associated with the number's digits on a telephone handset spell a name or word or contain digits of particular value to the number holder.
The process of assigning, reserving, and releasing Toll-Free Numbers for public use.
The application used to access the 800 Service Management System (SMS/800).
The entity appointed by the Commission under its authority pursuant to 47 C. F. R. § 251(e)(1) that provides user support for the Service Management System (SMS/800) database and administers the Service Management System database on a day-to-day basis.
A telecommunications service for which the dialing party incurs no toll charges and the Toll-Free Subscriber determines the routing and terminations of the calls.
A Toll-Free Service which terminates traffic to more than one purchaser based upon some unique identification capabilities (e.g., PINs, authorization codes). NOTE: For Shared Use Toll-Free or Bundled Services, the Shared Use Toll-Free or Bundled Service Provider is treated as the Toll-Free Subscriber, and is responsible to notify its purchasers of these services of this fact.
A telecommunications company that offers Toll-Free Services to its customer.
An entity that offers Shared Use Toll-Free Service to its Customers and holds the rights of Toll-Free Subscriber on the Toll-Free Number.
A Toll-Free Service Provider that purchases Toll-Free Service from another Toll-Free Service Provider and resells the Toll-Free Service to its customers.
Toll-Free Service that is resold by the customer of a Toll-Free Service Provider to a Toll-Free Subscriber or to another Toll-Free Service Reseller.
An electrically generated single-frequency sinusoidal oscillation. [T1.305-1990]
In a voice frequency telegraph (VFTG) transmission system, the use of two channels to carry the same information.
Note: Tone diversity is usually achieved by twinning the channels of a 16-channel VFTG to obtain 8 channels with dual diversity.
See dual-tone multifrequency signaling.
Synonym utility program.
In Internet addressing, a domain name identifying the highest hierarchical level in the geographical or organizational structure of the addressing system in Internet.
Note: In Internet, the top-level domain name is either an ISO country name, or an English abbreviation such as "com," "edu," "gov," "mil," "net," or "org. " [After 2382-pt.35]
The specification and arrangement in physical locations of actual communication and information system components which implement the topology.
See network topology.
An antiquated tape relay system in which the perforated tape is manually transferred by an operator to the appropriate outgoing transmitter.
Type of Service
The sum of random noise, intermodulation noise, and crosstalk.
Note: Total channel noise does not include impulse noise because different techniques are required for its measurement.
Of a signal, the ratio of (a) the sum of the powers of all harmonic frequencies above the fundamental frequency to (b) the power of the fundamental frequency.
Note 1: The THD is usually expressed in dB.
Note 2: Measurements for calculating the THD are made at the output of a device under specified conditions.
The reflection that occurs when light, in a higher refractive-index medium, strikes an interface, with a medium with a lower refractive index, at an angle of incidence (with respect to the normal) greater than the critical angle. See Snell's law (Note 3).
In facsimile, the spot speed divided by the scanning line frequency.
Note: The total line length may be greater than the length of the available line.
See touch-sensitive.
See touch-sensitive.
See dual-tone multifrequency (DTMF) signaling.
Pertaining to a device that allows a user to interact with a computer system by touching an area on the surface of the device with a finger, pencil, or other object; for example, a touch-sensitive keypad or screen.
Technical Report
In a packet-switching network, a unique packet that causes a report of each stage of its progress to be sent to the network control center from each visited system element.
A computer program that performs a check on another computer program by exhibiting the sequence in which the instructions are executed and usually the results of executing the instructions.
Property of the development of a system that allows requirements to be traced from one representation to another [CESG].
On a data medium, a path associated with a single read/write head position as data move past the head.
The number of tracks per unit length, measured in a direction perpendicular to the direction in which the tracks are read.
A ball that can be rotated about its center and that is used as an input device, e.g., to position a cursor. Synonym control ball.
The deviation of a dependent variable with respect to a reference function.
An operational mode during which a system is operating within specified movement limits relative to a reference.
See tracking mode.
1. The information moved over a communication channel.
2. A quantitative measurement of the total messages and their length, expressed in CCS or other units, during a specified period of time.
1. In a communications system, the analysis of traffic rates, volumes, densities, capacities, and patterns specifically for system performance improvement. [From Weik '89]
2. [The] study of communications characteristics external to the text. [NIS]
3. The analysis of the communications-electronic environment for use in the design, development, and operation of new communications systems. [From Weik '89]
4. In cryptology, the… (Read More →)
The maximum traffic per unit of time that a given telecommunications system, subsystem, or device can carry under specified conditions.
[A] key used to encrypt plain text or to superencrypt previously encrypted text and/or to decrypt cipher text. [INFOSEC-99]
The determination of the numbers and kinds of circuits and quantities of related terminating and switching equipment required to meet anticipated traffic loads throughout a communications system.
A confidentiality service to protect against traffic analysis [7498-2].
A measure of the average occupancy of a facility during a specified period of time, normally a busy hour, measured in traffic units (erlangs) and defined as the ratio of the time during which a facility is occupied (continuously or cumulatively) to the time this facility is available for occupancy.
Note: A traffic intensity of one traffic unit (one erlang)… (Read More →)
The total traffic carried by a trunk or trunk group during a specified time interval.
In a communications network, a service feature that provides basic data on the amount and type of traffic handled by the network.
A term applied to the routing of traffic and denoting routing via principal route for traffic between any two points as distinguished from alternate routes for such traffic. [47 CFR Pt.36-A]
1. That condition wherein the traffic offered to a portion of a communication system exceeds its capacity and the excess may be blocked or may be provided with alternate routing.
2. The excess traffic itself.
1. In COMSEC, a countermeasure that generates spurious data in transmission media to make traffic analysis or decryption more difficult. [2382-pt.8]
2. In reliability techniques, see pilot-make-busy circuit.
3. Generation of spurious communications or data units to disguise the amount of real data units being sent. [INFOSEC-99]
4. The generation of spurious instances of communication, spurious data units and/or spurious… (Read More →)
See register.
A stored program electronic system associated with one or more toll switching systems which provides centralized traffic service position functions for several local offices at one location. [47CFR part 67, Appendix. ]
Synonym erlang.
A device for measuring and recording the amount of telephone traffic carried by a group, or several groups, of switches or trunks.
1. The protection resulting from features, inherent in some crypto-equipment, that conceal the presence of valid messages on a communications circuit; normally achieved by causing the circuit to appear busy at all times. [After JP1]
2. Measures used to conceal the presence of valid messages in an on-line cryptosystem or secure communications system. [INFOSEC-99]
Note: Encryption of sending and receiving… (Read More →)
Protocol control information located at the end of a protocol data unit (PDU).
[The] property whereby the security level of an object cannot change while the object is being processed by an information system (IS). [INFOSEC-99]
A unit of work consisting of an arbitrary number of individual operations all of which will either complete successfully or abort with no effect on the intended resources. A transaction has well defined boundaries. A transaction starts with a request from the application program and either completes successfully (commits) or has no effect (abort). Both the commit and abort signify… (Read More →)
A program written to meet the requirements of a chosen Transaction Processing (TP) application [POSIX.0]. Such programs allow a sequence of operations that involve resources such as terminals and databases. The transaction application process specifies transaction boundaries. The transaction application process as defined here is a logical entity and may involve an arbitrary number of processes.
1. A means based upon the OSI-Reference Model to support applications in telecommunications networks. [T1.667-1999]
2. Protocol functions and procedures that control non-circuit related information exchange among signaling points in SS7 networks. It provides a general purpose approach to the introduction of new services within a network as well as a framework for service architecture for providing internetwork services. Transaction… (Read More →)
The degree to which a transaction flowing through a network reaches its intended destination without impairment of its function, content or meaning. [After X9.19]
Applications that exchange messages that are time-critical, bursty, and often limited in length, to perform an indivisible or elemental unit of work for OAM&P (operations, administration, maintenance, and provisioning) applications. [After T1.210-1993]
1. A device that performs, within one chassis, both transmitting and receiving functions.
2. In military communications, the combination of transmitting and receiving equipment that (a) is in a common housing, (b) usually is designed for portable or mobile use, (c) uses common circuit components for both transmitting and receiving, and (d) provides half-duplex operation.
The direct digital-to-digital conversion from one encoding scheme, such as voice LPC-10, to a different encoding scheme without returning the signals to analog form.
Note: The transcoded signals, i.e., the digital representations of analog signals may be any digital representation of any analog signal, such as voice, facsimile, or quasi-analog signals.
1. The factor by which the bit rate of a 64-kb/s channel is reduced when transcoding is used, e.g., when a transcoder conforming to ANSI T1.303 (i.e., ADPCM 32-kb/s) is used, the transcoding gain will equal
2. Transcoding gain equals 1 when no transcoding is used. [T1.309-1990]
A device for converting energy from one form to another for the purpose of measurement of a physical quantity or for information transfer.
Abbreviation for transmission security. See communications security.
To send information from one location and to receive it at another.
A procedure included in the signaling route management (functionality) that is used to inform a signaling point that a signaling route to a specific destination has become available. [T1.234-1993]
The maximum sustainable rate of information transfer. [T1.627-1993]
Those intrinsic parameters of a system, subsystem, or equipment which, when applied to the input of the system, subsystem, or equipment, will fully describe its output.
A procedure included in the signaling route management (functionality) that is used to inform a signaling point of congestion status of a signaling route. [T1.234-1993]
1. A mathematical statement that describes the transfer characteristics of a system, subsystem, or equipment.
2. The relationship between the input and the output of a system, subsystem, or equipment in terms of the transfer characteristics.
Note 1: When the transfer function operates on the input, the output is obtained. Given any two of these three entities, the third can… (Read More →)
In an integrated services digital network, (ISDN), a method of transmitting, multiplexing, and switching.
A procedure included in the signaling route management (functionality) that is used to inform a signaling point of the unavailability of a signaling route. [T1.234-1993]
See data transfer rate.
A procedure included in the signaling route management (functionality) that is used to inform a signaling point of the restriction of a signaling route. [T1.234-1993]
That concrete syntax used in the transfer of data between open systems. [T1.208-1989]
See dynamic variation.
Between two given points in an integrated services digital network (ISDN), the time between the moment that the first bit of a data unit, such as a frame or block, passes the first given point and the moment that bit passes the second given point, plus the transmission time of the data unit.
Note: Transit delay is defined only between… (Read More →)
As described in 3GPP TS
2
3. 228, a Transit Function may be used by an Application Server (AS) if the AS does not support routing capabilities. Under these circumstances, an AS may forward an originating request to the Transit Function and the Transit Function will route the session initiation request to the destination.3GPP allows the Transit Function to reside… (Read More →)
As described in 3GPP TS
2
3. 228, a Transit Function may be used by an Application Server (AS) if the AS does not support routing capabilities. Under these circumstances, an AS may forward an originating request to the Transit Function and the Transit Function will route the session initiation request to the destination.3GPP allows the Transit Function to reside… (Read More →)
A network service feature that specifies the sequence of networks used to establish or partially establish a virtual circuit.
A network section between two internet circuit sections. [T1.504-1989]
A node that interfaces with other nodes, and does not directly interface with customer equipment. [T1.101-1999]
Synonym phase delay.
In a signal, the changing from one significant condition to another.
Note: Examples of transitions are the changing from one voltage level to another in a data stream, the shifting from one phase position to another in phase-shift keying, and the translation from one frequency to another in frequency-shift keying. [From Weik '89]
The frequency associated with the difference between two discrete energy levels in an atomic system, given by where f 2
Synonym intermediate-field region.
In cryptography, the process of offset decrypting a key or set of keys using a transportation key shared with one center and then offset encrypting the same key or keys under a transportation key shared with a different center. [After X9.28]
Synonym translator.
A signaling point that performs SCCP (signal connection control part) global title translation. It is also known as SCCP Relay Node. The translation performed may be intermediate, in which case the TSP is referred to as "intermediate translation signaling point" (ITSP), or final, in which case the TSP is referred to as "final translation signaling point" (FTSP). [T1.226-1992]
1. A device that converts information from one system of representation into equivalent information in another system of representation.
Note: An example of a translator in telephony is the device that converts dialed digits into call-routing information.
2. A computer program that translates from one language into another language and in particular from one programming language into another programming language.… (Read More →)
To convert the characters of one alphabet to the corresponding characters of another alphabet.
1. The dispatching, for reception elsewhere, of a signal, message, or other form of information.
2. The propagation of a signal, message, or other form of information by any means, such as by telegraph, telephone, radio, television, or facsimile via any medium, such as wire, coaxial cable, microwave, optical fiber, or radio frequency.
3. In communications systems, a series of… (Read More →)
1. A group of bits or characters transmitted as a unit and usually containing an encoding procedure for error control purposes.
2. In data transmission, a group of records sent, processed, or recorded as a unit.
Note: A transmission block is usually terminated by an end-of-block character (EOB), end-of-transmission-block character (ETB), or end-of-text character (EOT or ETX).
Storage (viz. , buffer storage) in the signaling link control for signal units not yet transmitted. [After T1.110-1987]
See channel.
1. The ratio of the transmitted field strength to the incident field strength of an electromagnetic wave when it is incident upon an interface surface between media with two different refractive indices.
2. In a transmission line, the ratio of the amplitude of the complex transmitted wave to that of the incident wave at a discontinuity in the line.
3.… (Read More →)
See control character.
A network protocol that controls host-to-host transmissions over packet-switched communication networks.
A data structure, beginning and ending with delimiters, that consists of fields predetermined by a protocol for the transmission of user data and control data.
At a specified point in a telecommunications system, the power that is measured when a standard test signal, e.g., 0 dBm or -16 dBm at 1000 Hz, is transmitted from a corresponding reference point.
Note: The transmission level is usually expressed in dBm.
In a telecommunications system, a test point, i.e., a point where a signal may be inserted or measured, and for which the nominal power of a test signal is specified.
Note 1: In practice, the abbreviation, TLP, is usually used, and it is modified by the nominal level for the point in question. For example, where the nominal level is… (Read More →)
The material medium or structure that forms all or part of a path from one place to another for directing the transmission of energy, such as electric currents, magnetic fields, acoustic waves, or electromagnetic waves.
Note: Examples of transmission lines include wires, optical fibers, coaxial cables, rectangular closed waveguides, and dielectric slabs.
The decrease in power that occurs during transmission from one point to another.
Note: Transmission loss is usually expressed in dB.
The term "Transmission Measuring (105 Type) Test Line/Responder" denotes an arrangement in an end office which provides far-end access to a responder and permits two-way loss and noise measurements to be made on trunks from a near end office.
Any material substance, such as fiber-optic cable, twisted-wire pair, coaxial cable, dielectric-slab waveguide, water, and air, that can be used for the propagation of signals, usually in the form of modulated radio, light, or acoustic waves, from one point to another.
Note: By extension, free space can also be considered a transmission medium for electromagnetic waves, although it is not… (Read More →)
1. See communications security.
2. [A] Component of COMSEC resulting from the application of measures designed to protect transmissions from interception and exploitation by means other than cryptanalysis. [INFOSEC-99]
[A] key that is used in the control of TRANSEC (transmission security) processes, such as frequency hopping and spread spectrum. [INFOSEC-99]
In video systems, the one-way transmission path between two designated points.
The term "Transmission Specifications" denotes the appropriate limits, e.g., acceptance and immediate action limits, of the Access Service transmission parameters.
Part of a communication system organized to accomplish the transfer of information from one point to one or more other points by means of signals.
Note: Examples of NATO-owned transmission systems are SATCOM, ACE HIGH and CIP-6
7. [NATO]
In facsimile, the interval between the start of picture signals and the detection of the end-of-message signal by the receiver for a single document.
Synonym spectral window. See window.
Obsolete. See transmittance.
In data communications systems, control of the rate at which data are transmitted from a terminal so that the data can be received by another terminal.
Note 1: Transmit flow control may occur between data terminal equipment (DTE) and a switching center, via data circuit-terminating equipment (DCE), or between two DTEs. The transmission rate may be controlled because of network… (Read More →)
The ratio in dB of the sound pressure produced by a speaker to the voltage produced by a telephone and loop as defined by ANSI/IEEE 661-199
7. [T1.255-1997]
The signal sent across an interface la or lb from the associated equipment. [T1.408-1990]
The time interval from removal of rf energy at the local receiver input until the local transmitter is automatically keyed on and the transmitted rf signal amplitude has increased to 90% of its steady-state value. An Exception: High-frequency (HF) transceiver equipment is normally not designed with an interlock between receiver squelch and transmitter on-off key. The transmitter can be keyed… (Read More →)
The ratio of the transmitted power to the incident power.
Note 1: In optics, transmittance is usually expressed as optical density or in percent.
Note 2: Transmittance was formerly called "transmission. "
The source or generator of any signal on a transmission medium. [T1.408-1990]
The interval from the instant a transmitter is keyed-on to the instant the transmitted radio frequency (rf) signal amplitude has increased to a specified level, usually 90% of its key-on steady-state value.
Note: The transmitter attack-time delay excludes the time required for automatic antenna tuning.
In optical communication, the total allowed range of transmitter central wavelengths caused by the combined worst-case variations due to manufacturing, temperature, aging, and any other significant factors.
The power output of a radio transmitter under stated conditions of operation and measurement.
Note: Power output ratings may be made against a number of criteria, e.g., peak envelope power, peak power, mean power, carrier power, noise power, or stated intermodulation level.
The interval from the instant a transmitter is keyed-off to the instant the transmitted radio frequency (rf) signal amplitude has decreased to a specified level, usually 10% of its key-on steady-state value.
A one-way 15-kHz program system comprised of a transmitting terminal connected via a DS1 digital link to a receiving terminal. [T1.305-1990]
Equipment that transforms signals derived from frequency-division multiplex equipment, such as group or supergroups, to time-division-multiplexed signals having the same structure as those derived from PCM multiplex equipment, such as primary or secondary PCM multiplex signals, and vice versa.
1. The property of an entity that allows another entity to pass thorough it without altering either of the entities.
2. In telecommunications, the property that allows a transmission system or channel to accept, at its input, unmodified user information, and deliver corresponding user information at its output, unchanged in form or information content.
Note: The user information may be… (Read More →)
An interface that allows the connection and operation of a system, subsystem, or equipment with another without modification of system characteristics or operational procedures on either side of the interface.
A loopback in which the signal is transmitted beyond the loopback point (the forward signal).
See transparency.
1. An automatic device that receives, amplifies, and retransmits a signal on a different frequency.
2. An automatic device that transmits a predetermined message in response to a predefined received signal.
Note: An example of transponders is in identification-friend-or-foe systems and air-traffic-control secondary radar (beacon radar) systems.
3. A receiver-transmitter that will generate a reply signal upon proper interrogation. [JP1]
1. In telecommunications, to convey information from one location to another. [J. Beaty, FAA]
2. Facilities associated with the carriage of OC-1 or higher level signals.
3. A process used to convey data from one point to another point or points by placing the data in defined structures (packets) in accordance with a standard or an RFC. Examples include ISO/IEC… (Read More →)
See Open Systems Interconnection--Reference Model.
The overhead added to the STS SPE (synchronous transport signal -- synchronous payload envelope) for transport purposes. Transport overhead consists of line and section overhead. [T1.105-1988]
1. In communications, the quality of equipment, devices, systems, and associated hardware that permits their being moved from one location to another to interconnect with locally available complementary equipment, devices, systems, associated hardware, or other complementary facilities.
Note: Transportability implies the use of standardized components, such as standardized plugs and transmission media.
2. The capability of materiel to be moved… (Read More →)
A station which is transferred to various fixed locations but is not intended to be used while in motion. [NTIA]
In INFOSEC, encryption that rearranges bits or characters according to some scheme. [2382-pt.8]
Note: The resulting ciphertext is called transposition cipher. [2382-pt.8]
A mode whose electric field vector is normal to the direction of propagation.
Note: TE modes may be useful modes in waveguides. In an optical fiber, TE and TM modes correspond to meridional rays.
A mode whose electric and magnetic field vectors are both normal to the direction of propagation.
Note: The TEM mode is the most useful mode in a coaxial cable.
A mode whose magnetic field vector is normal to the direction of propagation.
Note: TM modes may be useful in waveguides. In an optical fiber, TE and TM modes correspond to meridional rays.
Synonym lateral offset loss.
A parity check performed on a group of binary digits recorded on parallel tracks of a data medium, such as a magnetic disk, tape, drum, or card. [From Weik '89]
In synchronized parallel bit streams, a redundancy check (a) that is based on the formation of a block check following preset rules, (b) in which the check-formation rule applied to blocks is also applied to characters, and (c) in which the check is made on parallel bit patterns.
Note 1: When the TRC is based on a parity bit applied… (Read More →)
In a facsimile receiver, the dimension that (a) is perpendicular to a scanning line and (b) is the smallest recognizable detail of the image produced by the shortest signal capable of actuating the facsimile receiver under specified conditions. [From Weik '89]
1. A hidden software or hardware mechanism, usually created for testing and troubleshooting, that may be used to circumvent computer security. [2382-pt.8]
2. A hidden software or hardware mechanism that permits system protection mechanisms to be circumvented. It is activated in some non-apparent manner (e.g., special "random" key sequence at a terminal) [TCSEC].
An electromagnetic wave that enters a layer of material that is surrounded on both sides by a layer of material of a lesser refractive index such that, if the wave is traveling parallel or nearly parallel to the surfaces of the layers and hence the incident angles with the surfaces are greater than the critical angle, i.e., the angles are… (Read More →)
Synonym bound mode.
Synonym guided ray.
A wave that (a) propagates in a transmission medium, (b) has a velocity determined by the launching conditions and the physical properties of the medium, and (c) may be a longitudinal or transverse wave.
Note 1: For the purposes of this definition, free space may be considered a medium, although it is not a physical medium.
Note 2: A traveling… (Read More →)
Transport Resource Control Functional Entity
See network topology.
In a tree structure, a search in which it is possible to decide, at each step, which part of the tree may be rejected without a further search.
A hierarchical organization in which a given node is considered to be an ancestor of all the lower level nodes to which the given node is connected.
Note 1: The root node, i.e., the base node, is an ancestor of all the other nodes.
Note 2: In a tree structure there is one and only one path from any point… (Read More →)
See network topology.
Frequencies from 300 GHz to 3000 GHz. See electromagnetic spectrum.
Acronym for tri-services tactical. See tactical communications.
Equipment that (a) accommodates the transition from current manual and analog systems to fully automated digital systems and (b) provides for message switching, voice communications circuit switching, and the use of secure voice terminals, digital facsimile systems, and user digital voice terminals.
A specialized form of coaxial cable, circular in cross-section and consisting of (a) a center conductor, often a solid wire but sometimes braided; separated by an insulating material from (b) a concentric solid or braided conductor which is in turn separated by an insulating material from (c) a third solid or braided conductor, concentric with the first two; and (d)… (Read More →)
A circuit between a tributary office and a toll switchboard or intertoll dialing equipment in a toll center city. [47 CFR Pt.36-A]
A local office which is located outside the exchange in which a toll center is located, which has a different rate center from its toll center and which usually tickets and times only a part of its originating toll traffic, but which may ticket or time all or none, of such traffic. The toll center handles all outward traffic not… (Read More →)
1. In a data network, a station other than the control station.
2. On a multipoint connection or a point-to-point connection using basic mode link control, any data station other than the control station.
In a crystal oscillator, the degradation of frequency-vs. -temperature stability, and marked frequency offset, resulting from frequency adjustment which produces a rotation or distortion, or both, of the inherent frequency-vs. -temperature characteristic.
An encryption algorithm whose key consists of three DES (Data Encryption Standard) keys, which is also referred to as a key bundle.
Note 1: A DES key consists of 64 binary digits ("0"s or "1"s) of which 56 bits are randomly generated and used directly by the algorithm. (The other 8 bits, which are not used by the algorithm, may… (Read More →)
Characterized by the use of three computer words to represent a number in accordance with required precision.
A byte composed of three bits. Synonym three-bit byte.
In a given trichromatic system, the amounts of the three reference color stimuli required to match the light considered in a given chromatic system. [After IEEE]
1. An apparently harmless program containing malicious logic that allows the unauthorized collection, falsification, or destruction of data. [2382-pt.8]
2. [A] program containing hidden code allowing the unauthorized collection, falsification, or destruction of information. [INFOSEC-99]
3. A computer program with an apparently or actually useful function that contains additional (hidden) functions that surreptitiously exploit the legitimate authorizations of the invoking… (Read More →)
Synonym tropospheric scatter.
1. The lower layers of atmosphere, in which the change of temperature with height is relatively large. It is the region where clouds form, convection is active, and mixing is continuous and more or less complete. [JP1]
2. The layer of the Earth's atmosphere, between the surface and the stratosphere, in which temperature decreases with altitude and which contains approximately… (Read More →)
See atmospheric duct.
1. The propagation of radio waves by scattering as a result of irregularities or discontinuities in the physical properties of the troposphere. [NTIA] [RR] [JP1]
2. A method of transhorizon communications using frequencies from approximately 350 MHz to approximately 8400 MHz.
Note: The propagation mechanism is still not fully understood, though it includes several distinguishable but changeable mechanisms such as… (Read More →)
A radio wave that is propagated by reflection from a place of abrupt change in the dielectric constant, or its gradient, in the troposphere.
Note: In some cases, a ground wave may be so altered that new components appear to arise from reflection in regions of rapidly changing dielectric constant. When these components are distinguishable from the other components, they… (Read More →)
Synonym effective power.
In carrier sense multiple access with collision avoidance (CSMA/CA) networks and in carrier sense multiple access with collision detection (CSMA/CD) networks, the algorithm used to schedule retransmission after a collision such that the retransmission is delayed by an amount of time derived from the slot time and the number of attempts to retransmit.
The deletion or omission of a leading or a trailing portion of a string in accordance with specified criteria.
In the representation of a number, the error introduced when one or more digits are dropped.
1. In a communications network, a single transmission channel between two points that are switching centers or nodes, or both.
2. [A] circuit between switchboards or other switching equipment, as distinguished from circuits which extend between central office switching equipment and information origination/termination equipment. [47 CFR Pt.36-A]
Note: Trunks may be used to interconnect switches, such as major, minor, public… (Read More →)
A unique identity assigned to each SS7 message trunk interconnecting two switches. [T1.226-1992]
A bulk encryption device used to provide secure communications over a wideband digital transmission link.
Note: A TED is usually located between the output of a trunk group multiplexer and a wideband radio or cable facility.
The Trunk Gateway provides an access interface between traditional Public Switched Telephone Network (PSTN) circuit-based networks and packet networks. Examples of the PSTN trunk interfaces are Integrated Services Digital Network (ISDN) User Part (ISUP), Primary Rate Interface (PRI), Multi Frequency (MF) and Digital Tone Multi Frequency (DTMF). The Trunk Gateway may also support an interface for line based Generic Requirement… (Read More →)
Two or more trunks of the same type between two given points.
A time-division multiplexer that combines individual digital trunk groups into a higher rate bit stream for transmission over wideband digital communications links.
A unique alphanumeric code used to identify a trunk group. [T
1. Rpt 11-1991]
See hunting.
1. In cryptology and cryptosystems, that characteristic allowing one entity to assume that a second entity will behave exactly as the first entity expects.
Note: Trust may apply only for some specific function. The critical role of trust in the authentication framework is to describe the relationship between an authenticating entity and a certification authority; an authenticating entity must be… (Read More →)
1. [An] information system (IS) employing sufficient hardware and software assurance measures to allow simultaneous processing of a range of classified or sensitive information. [INFOSEC-99]
2. A data processing system that provides sufficient computer security to allow for concurrent access to data by users with different access rights and to data with different security classification and security categories. [2382-pt.8]
3.… (Read More →)
1. [The] totality of protection mechanisms within a computer system , including hardware , firmware , and software , the combination of which is responsible for enforcing a security policy. [INFOSEC-99]
Note: The ability of a trusted computing base to enforce correctly a unified security policy depends on the correctness of the mechanisms within the trusted computing base, the protection… (Read More →)
[A] method for distributing trusted computing base (TCB) hardware, software, and firmware components that protects the TCB from modification during distribution. [INFOSEC-99]
A function whose correct operation is relied upon for the security policy to be upheld [CESG].
Note: The term is normally used after the establishment of the evaluation baseline, to relate to representations produced subsequent to the system requirements (e. g. functional specification and design specification). See also: Security Function.
That which is perceived to be correct with respect to some criteria, e.g., as established by a security policy [7498-2].
[The] identification method used in information system (IS) networks whereby the sending host can verify an authorized user on its system is attempting a connection to another host. The sending host transmits the required user authentication information to the receiving host. [INFOSEC-99]
The subnetwork formed by an association of interconnected Trusted Network Interface Units and one or more Access control Systems [CESG]. See also Trusted Network Interface Unit below.
TNET (see Trusted Network above) will be realized by the development of a number of components including the TNIU and ACS. The TNIU is located between the end system and the network that provides separation, integrity, access control and authentication services by means of encryption across the network and supports the operation of the TNIUs by providing them with the… (Read More →)
1. [The] Mechanism by which a person using a terminal can communicate directly with the trusted computing base (TCB). Trusted path can only be activated by the person or the TCB and cannot be imitated by untrusted software. [INFOSEC-99]
2. A mechanism by which a user can communicate directly with a trusted function [CESG]. Example: A trusted path is required… (Read More →)
[A] process that has privileges to circumvent the system security policy and has been tested and verified to operate only as intended. [INFOSEC-99]
1. [The] ability to ensure recovery without compromise after a system failure. [INFOSEC-99]
2. The property of a system which ensures that it can be returned to a secure operating state following a system failure, in accordance with the Security Policy [CESG].
Part of a system that contains trusted functions [CESG].
1. [The] software portion of a trusted computing base (TCB). [INFOSEC-99]
2. The software portion of a Trusted Computing Base [TCSEC].
1. A security authority trusted by communicating entities with respect to specific security-related activities (e.g., for the purpose of authentication). [T1.243-1995]
2. A security authority or its agent, trusted by other entities with respect to security-related activities [10181-1].
3. A security authority or its agent, trusted by other entities with respect to security-related activities. In the context of this standard… (Read More →)
1. An operation table for a logic operation.
2. A table that describes a logic function by listing all possible combinations of input values and indicating, for each combination, the output value.
Transport Stream
[In security, the] system for identifying the type and purpose of certain items of COMSEC material. [INFOSEC-99]
Abbreviation for transmission security key.
1. Telecommunications Service Priority,
2. terminal service profile,
3. translation signaling point,
4. tunnel set-up protocol. See: Telecommunications Service Priority (TSP) service; Telecommunications Service Priority (TSP) Program; Telecommunications Service Priority (TSP) Program user.
See Telecommunications Service Priority system.
Abbreviation for traffic service position system.
All groups of operator positions, wherever located, associated with the same TSPS stored program control units. [47 CFR Pt.36-A]
Abbreviation for tandem tie trunk network.
Abbreviation for teletypewriter.
A unique telecommunication device for the deaf, using TTY principles.
Adjusting the parameters and components of a circuit so that it resonates at a particular frequency or so that the current or voltage is either maximized or minimized at a specific point in the circuit.
Note: Tuning is usually accomplished by adjusting the capacitance or the inductance, or both, of elements that are connected to or in the circuit. [From… (Read More →)
1. In computer networking, a technique for connecting two networks via a third, while totally isolating the connected traffic from other traffic in the third network. [After 2382-pt.35]
2. Technology enabling one network to send its data via another network's connections. Tunneling works by encapsulating a network protocol within packets carried by the second network. [INFOSEC-99]
Synonym leaky mode.
Synonym leaky ray.
Transport User Profile Functional Entity
A mathematical model of a device that changes its internal state and reads from, writes on, and moves a potentially infinite tape, all in accordance with its present state, thereby constituting a model for computer-like behavior.
In a half-duplex circuit, the time required to reverse the direction of transmission from transmit to receive or vice versa.
Pertaining to a procurement process that (a) includes contractual actions at least through the system, subsystem, or equipment installation phase and (b) may include follow-on contractual actions, such as testing, training, logistical, and operational support.
Note: Precise definition of the types of allowable contractual features are contained in the Federal Acquisition Regulations (FAR).
A cable composed of two parallel conductors separated from each other by a ribbon-like insulator or encased by a foam insulator. Synonym twin-lead.
See independent-sideband transmission.
Synonym twin cable.
A frequency-shift-keyed (FSK) carrier telegraphy system in which four unique tones, i.e., two pairs of tones, are transmitted over a single transmission channel, such as one twisted pair.
Note: One tone of each pair represents a "mark" and the other a "space. "
In telephony, a change, as a function of temperature, in the shape of the frequency-vs. -attenuation response curve, i.e., characteristic, of a transmission line.
A pair of individually insulated conductors (wires) twisted together and treated as an entity in the transmission of electrical signals or power (e.g., from an electronic power supply to a circuit).
Note 1: In communications cables, the twisted pair is usually if not always composed of two individually insulated solid conductors (wires). In other applications, e.g., in a power-supply application,… (Read More →)
See paired cable.
A binary-coded decimal notation in which (a) each decimal digit is represented by a binary numeral consisting of five binary digits of which two are of one kind, called "ones," and three are of the other kind, called "zeros" and (b) the usual weights assigned to the digit positions are 0-1-2-3-6, except that "zero" is represented as 01100.
Code consisting of an encoding section, in which the vocabulary items (with their associated code groups) are arranged in alphabetical or other systematic order; and a decoding section, in which the code groups (with their associated meanings) are arranged in a separate alphabetical or numeric order. [INFOSEC-99]
Continuous surveillance and control of positive control material at all times by a minimum of two authorized individuals, each capable of detecting incorrect and unauthorized procedures with respect to the task being performed, and each familiar with established security and safety requirements. [INFOSEC-99]
[A] system of storage and handling designed to prohibit individual access to certain COMSEC keying material by requiring the presence of at least two authorized persons, each capable of detecting incorrect or unauthorized security procedures with respect to the task being performed. [INFOSEC-99]
In frequency-division multiplexed (FDM) systems, the use of two pilot frequencies within a band so that the differential change in attenuation with respect to temperature, i.e., twist, can be detected and compensated by a regulator.
The square root of the Allan variance.
Synonym Allan variance.
Synonym frequency-exchange signaling.
In telegraphy systems, keying in which the modulating wave causes the carrier to be modulated with a single tone for the "mark" and modulated with a different single tone for the "yyspace. "
See two-tone keying.
Synonym half-duplex operation.
Synonym duplex operation.
Also 2-wire circuit. A full-duplex communications circuit that utilizes only two metallic conductors, e.g., a single twisted pair.
Acronym for teletypewriter exchange service.
Abbreviation for transmitter, transmit, Transmit Diversity.
A wireless SP that utilizes Type 1 (trunk side with line treatment) interconnection with another SP's end office switch.
Classified or controlled cryptographic item for securing classified and sensitive U. S. Government information, when appropriately keyed. The term refers only to products, and not to information, key, services, or controls. Type 1 products contain classified algorithms. They are available to U. S. Government users, their contractors, and federally sponsored non-U. S. Government activities subject to export restrictions in accordance… (Read More →)
Unclassified cryptographic equipment, assembly, or component, endorsed by the National Security Agency, for use in national security systems as defined in Title 40 U. S. C. Section
145
2. [INFOSEC-99]
Note: The term refers only to products, and not to information, key, services, or controls. Type 2 products may not be used for classified information, but contain classified National Security… (Read More →)
[A] cryptographic algorithm that has been registered by the National Institute of Standards and Technology (NIST) and published as a Federal Information Processing Standard (FIPS) for use in protecting unclassified sensitive, information or commercial information. [INFOSEC-99]
[An] unclassified cryptographic algorithm that has been registered by the National Institute of Standards and Technology (NIST), but not published as a Federal Information Processing Standard (FIPS). [INFOSEC-99]
Showing 1–556 of 556 results