b
Abbreviation for bit.
Select a term name to open its entry and any media references. Longer definitions end with a “Read More” link.
Loading results…
Abbreviation for bit.
1. A communications channel used for the transmission of an aggregate signal generated by multichannel transmitting equipment.
2. The CCITT (now, ITU-T) designation for a clear channel, 64-kb/s service capability provided to a subscriber under the Integrated Services Digital Network offering.
Note: The B channel, also called the bearer channel, is intended for transport of user information, as opposed to… (Read More →)
An MPEG video frame type that provides bidirectional interframe compression.
Note: A b frame derives its content from the closest 1 or P frame, one in the past and one in the future. Generating b frames requires greater computing power than does generating 1 or P frames. The use of b frames enables compression ratios of 200:
1. Robust MPEG… (Read More →)
Billing and Customer Care
Abbreviation for broadband ISDN.
Abbreviation for bits per second.
Business to Business
Back-to-Back User Agreements
Business to Consumer
Abbreviation for bipolar with three-zero substitution. A T-carrier line code in which bipolar violations are deliberately inserted if user data contain a string of 3 or more consecutive zeros.
Note 1: B3ZS is used to ensure a sufficient number of transitions to maintain system synchronization when the user data stream contains an insufficient number of "ones" to do so.
Note… (Read More →)
Abbreviation for bipolar with six-zero substitution. A T-carrier line code in which bipolar violations are deliberately inserted if user data contain a string of 6 or more consecutive zeros. A code in which eight consecutive zeros are replaced with the sequence 000+-0-+ if the preceding pulse was + and with the sequence 000-+0+- of the preceding pulse was -, where… (Read More →)
Abbreviation for bipolar with eight-zero substitution. A T-carrier line code in which bipolar violations are deliberately inserted if user data contains a string of 8 or more consecutive zeros.
Note 1: B8ZS is used to ensure a sufficient number of transitions to maintain system synchronization when the user data stream contains an insufficient number of "ones" to do so.
Note… (Read More →)
In transmission systems, the aggregate of crosstalk induced in a given line by all other lines.
Synonym trapdoor.
1. A direct connection between the output of a transmitting device and the input of an associated receiving device.
Note: When used for equipment measurements or testing purposes, such a back-to-back connection eliminates the effects of the transmission channel or medium.
2. A direct connection between the output of a receiving device and the input to a transmitting device.
Note:… (Read More →)
1. The high-traffic-density connectivity portion of any communications network.
2. In packet-switched networks, a primary forward-direction path traced sequentially through two or more major relay or switching stations.
Note: In packet-switched networks, a backbone consists primarily of switches and interswitch trunks.
1. In Web pages, an image or color, usually defined in HTML, that serves as the underlying color or imagery for a Web page.
Note: Browsers may also be configured to dictate backgrounds.
2. In computer display systems, the underlying color or imagery for the main screen or for the fundamental window of a computer's operating system.
The total system noise in the absence of information transmission.
The execution of lower priority computer programs when higher priority programs are not using the system resources.
Note: Priorities may be assigned by system software, application software, or the operator.
1. The practice of routing telecommunications traffic beyond its intended destination, and then back to the intended destination, usually for the purpose of taking advantage of tariffs or prices that are lower than those afforded by direct routing.
2. In security, to bring a call that has been routed along a particular path (usually via satellite) to some earlier position… (Read More →)
1. Radio wave propagation in which the direction of the incident and scattered waves, resolved along a reference direction (usually horizontal) are oppositely directed. A signal received by backscattering is often referred to as "backscatter. " [JP 1-02]
2. In optics, the scattering of light into a direction generally opposite to the original one.
1. [A] copy of files and programs made to facilitate recovery, if necessary. [INFOSEC-99]
2. See backup file.
A copy of a file made for purposes of later reconstruction of the file, if necessary.
Note: A backup file may be used for preserving the integrity of the original file and may be recorded on any suitable medium. Synonym job-recovery control file.
1. In data transmission, a secondary channel in which the direction of transmission is constrained to be opposite to that of the primary, i.e., the forward (user-information) channel.
Note: The direction of transmission in the backward channel is restricted by the control interchange circuit that controls the direction of transmission in the primary channel.
2. In a data circuit, the… (Read More →)
A signal unit (or sequence of bits) that (by changing its status) is used to request retransmission by the remote end whenever it receives a signal unit that is out of sequence. [T1.226-1992]
The reconstruction of an earlier version of a file by using a newer version of data recorded in a journal.
A field in a signal unit that contains the forward sequence number of a correctly received signal unit being acknowledged in the signal unit that is being returned to the sender. [After T1.226-1992]
A signal sent from the called to the calling station, i.e., from the original data sink to the original data source.
Note: Backward signals are usually sent via a backward channel and may consist of supervisory, acknowledgment, or control signals.
The use of supervisory signal sequences from a secondary to a primary station.
Building Automation and Control Network
A program that attempts to propagate itself by e-mailing a copy of itself to e-mail addresses found on a recipient's hard drive. This is done without the consent or knowledge of the recipient.
Note: In many cases, this type of program does not attempt to cause any direct damage to user's system, but rather attempts to overload the e-mail distribution… (Read More →)
A technique for copy protection in which bad sectors are intentionally written on a diskette. [2382-pt.8]
In electrical circuits and networks, to adjust the impedance to achieve specific objectives, such as to reach specified return loss objectives at a hybrid junction of two-wire and four-wire circuits.
1. A measure of the degree of balance between two impedances connected to two conjugate sides of a hybrid set, coil, network, or junction.
2. A measure of the effectiveness with which a balancing network simulates the impedance of a two-wire circuit at a hybrid coil.
Pertaining to electrical symmetry.
1. In PCM systems, a code constructed so that the frequency spectrum resulting from the transmission of any code word has no dc component.
2. In PCM, a code that has a finite digital sum variation.
A transmission line consisting of two conductors in the presence of ground, capable of being operated in such a way that when the voltages of the two conductors at all transverse planes are equal in magnitude and opposite in polarity with respect to ground, the currents in the two conductors are equal in magnitude and opposite in direction.
Note: A… (Read More →)
A modulator constructed so that the carrier is suppressed and any associated carrier noise is balanced out.
Note 1: The balanced modulator output contains only the sidebands.
Note 2: Balanced modulators are used in AM transmission systems.
Synonym balanced line.
1. In a hybrid set, hybrid coil, or resistance hybrid, a circuit used to match, i.e., to balance, the impedance of a uniform transmission line, i.e., twisted metallic pair, over a selected range of frequencies.
Note: A balancing network is required to ensure isolation between the two ports of the four-wire side of the hybrid.
2. A device used between… (Read More →)
Abbreviation for balanced to unbalanced. In radio frequency usage, a device used to couple a balanced device or line to an unbalanced device or line.
1. In communications, the frequency spectrum between two defined limits.
2. A group of tracks on a magnetic drum or on one side of a magnetic disk.
3. A set of frequencies authorized for use in a geographical area defined for common carriers for purposes of communications system management.
Synonym band-stop filter.
Synonym band-stop filter.
A filter that attenuates, usually to very low levels, all frequencies between two non-zero, finite limits and passes all frequencies not within the limits.
Note: A band-stop filter may be designed to stop the specified band of frequencies but usually only attenuates them below some specified level. Synonyms band-elimination filter, band-rejection filter, band-suppression filter, notched filter.
Synonym band-stop filter.
A filter that ideally passes all frequencies between two non-zero finite limits and bars all frequencies not within the limits.
Note: The cutoff frequencies are usually taken to be the 3-dB points.
A device that imposes hard limiting on a signal and contains a filter that suppresses the unwanted products (harmonics) of the limiting process.
1. The difference between the limiting frequencies within which performance of a device, in respect to some characteristic, falls within specified limits.
2. The difference between the limiting frequencies of a continuous frequency band.
3. A characteristic of a communication channel that is the amount of information that can be passed through it in a given amount of time, usually… (Read More →)
1. The lowest modulation frequency at which the RMS peak-to-valley amplitude (optical power) difference of an intensity-modulated monochromatic signal decreases, at the output of the fiber, to a specified fraction (usually one-half) of the RMS peak-to-valley amplitude (optical power) difference of a nearly-zero (arbitrarily low) modulation frequency, both modulation frequencies having the same RMS peak-to-valley amplitude (optical power) difference at… (Read More →)
In a distributed-queue dual-bus network, a procedure in which a node occasionally skips the use of empty queued arbitrated slots, and which procedure effects sharing of the bandwidth mechanisms.
1. The reduction of the bandwidth needed to transmit a given amount of data in a given time.
2. The reduction of the time needed to transmit a given amount of data in a given bandwidth.
Note: Bandwidth compression implies a reduction in normal bandwidth of an information-carrying signal without reducing the information content of the signal.
The condition prevailing when the system bandwidth limits performance.
Note: Bandwidth-limited operation occurs when the system distorts the signal waveform beyond specified limits. For linear systems, bandwidth-limited operation is equivalent to distortion-limited operation.
Of an optical fiber, under specified launching and cabling conditions, at a specified wavelength, a figure of merit equal to the product of the fiber's length and the 3-dB bandwidth of the optical signal.
Note 1: The bandwidthdistance product is usually stated in megahertzkilometer (MHzkm) or gigahertzkilometer (GHzkm).
Note 2: The bandwidthdistance product, which is normalized to 1 km, is… (Read More →)
Synonym for bandwidthdistance product.
The exclamation point character (!) used in early addressing schemes to separate the names of individual machines.
Note: Bang-style addressing is no longer common. Synonym scream.
1. An HTML tag that creates scrolling text on a Web page. [Bahorsky]
2. Scrolling or fixed text used as an advertisement on a Web page, e.g., banner advertising. [Bahorsky]
3. In computer networking, a page that is automatically prefixed to, and printed out as part of, a printing job , as a means of identifying uniquely the output belonging… (Read More →)
Synonym banner.
A code representing characters by sets of parallel bars of varying thickness and separation that are read optically by transverse scanning.
Note: Bar code uses include identifying merchandise, sorting mail, and inventorying supplies.
Jamming accomplished by transmitting a band of frequencies that is large with respect to the bandwidth of a single emitter.
Note: Barrage jamming may be accomplished by presetting multiple jammers on adjacent frequencies or by using a single wideband transmitter. Barrage jamming makes it possible to jam emitters on different frequencies simultaneously and reduces the need for operator assistance or… (Read More →)
1. In the numeration system commonly used in scientific notation, the real number that is raised to a power denoted by the exponent and then multiplied by the coefficient to determine the value of the number represented without the use of exponents.
Note: An example of a base is the number
6. 25 in the expression
2. 70 ×
6.… (Read More →)
1. An address that is used as the origin in the calculation of addresses in the execution of a computer program. [From Weik '96]
2. A given address from which an absolute address is derived by combination with a relative address.
Note: Base addresses are primarily used by computer programmers rather than by computer users. [From Weik '96]
Communications services, such as the installation, operation, maintenance, augmentation, modification, and rehabilitation of communications networks, systems, facilities, and equipment, including off-post extensions, provided for the operation of a military post, camp, installation, station, or activity. Synonym communications base station.
An Earth station in the fixed-satellite service or, in some cases, in the land mobile-satellite service, located at a specified fixed point or within a specified area on land to provide a feeder link for the land mobile-satellite service. [NTIA] [RR] [47CFR]
A key used to derive (to compute cryptographically) or to decrypt transaction keys. [After X9.24]
A standard or specification that is recognized as appropriate for normative reference in a profile by the body adopting that profile, but is not a profile itself [POSIX.0].
1. A land station in the land mobile service. [NTIA] [RR] [47CFR]
2. In personal communication service, the common name for all the radio equipment located at one fixed location, and that is used for serving one or several cells.
1. The original band of frequencies produced by a transducer, such as a microphone, telegraph key, or other signal-initiating device, prior to initial modulation.
Note 1: In transmission systems, the baseband signal is usually used to modulate a carrier.
Note 2: Demodulation re-creates the baseband signal.
Note 3: Baseband describes the signal state prior to modulation, prior to multiplexing, following… (Read More →)
A local area network in which information is encoded, multiplexed, and transmitted without modulation of carriers.
Intensity modulation of an optical source, e.g., LED or ILD, directly, without first modulating the signal of interest onto an electrical carrier wave. [After FAA]
Transmission of a digital or analog signal at its original frequencies; i.e., a signal in its original form, not changed by modulation.
Abbreviation for base communications.
A characterization of a simple standardized combination of access channels that constitute the access arrangements for the majority of ISDN users; specifically, any of the following combinations of access channels: (1) one D-channel, (2) one B-channel plus one D-channel, (3) two B-channels plus one D-channel. [After T1.601-1988]
A call between two users that does not include additional features (e.g., a plain telephone call).
The sequence of activities used in processing a basic call attempt. [T1.667-1999]
A component that is identifiable at the lowest hierarchical level of specification produced during Detailed Design [ITSEC].
A commercial service that can extend telephone service to rural areas by replacing the local loop with radio communications.
Note: In the BETRS, non-government ultra high frequency (UHF) and very high frequency (VHF) common carrier and the private radio service frequencies are shared.
See group.
Control of data links by use of the control characters of the 7-bit character set for information processing interchange as given in ISO Standard 646-1983 and CCITT (ITU-T) Recommendation V.3-1972.
An ITU-T Integrated Services Digital Network (ISDN) multipurpose user interface standard that denotes the capability of simultaneous voice and data services provided over two clear 64-kb/s channels and one clear 16-kb/s channel (2B+D) access arrangement to each user location.
1. A pure transmission capability over a communication path that is virtually transparent in terms of its interaction with customer-supplied information.
2. The offering of transmission capacity between two or more points suitable for a user's transmission needs and subject only to the technical parameters of fidelity and distortion criteria, or other conditioning.
1. An optional unbundled feature, generally associated with the basic serving arrangement (BSA), that an enhanced-service provider (ESP) may require or find useful in configuring an enhanced service.
2. A fundamental (basic) communication network service; an optional network capability associated with a BSA.
Note: BSEs constitute optional capabilities to which the customer may subscribe or decline to subscribe.
1. The fundamental tariffed switching and transmission (and other) services that an operating company must provide to an enhanced service provider (ESP) to connect with its customers through the company network.
2. In an open-network-architecture context, the fundamental underlying connection of an enhanced service provider (ESP) to and through the operating company's network including an ESP access link, the features… (Read More →)
In data transmission, the status of the capability of a secondary station to send or receive a frame containing an information field.
1. A host computer that, in a screened subnetwork, performs the functions of a firewall. Synonym screened-host gateway. [2382-pt.35]
2. A computer system that must be highly secured because it is vulnerable to attack, usually because it is exposed to the Internet and is a main point of contact for users of internal networks. It gets its name from the… (Read More →)
1. The processing of data or the accomplishment of jobs accumulated in advance in such a manner that the user cannot further influence the processing while it is in progress.
2. The processing of data accumulated over a period of time.
3. Loosely, the execution of computer programs serially.
4. Pertaining to the technique of executing a set of computer… (Read More →)
Synonym batched transmission.
The transmission of two or more messages from one station to another without intervening responses from the receiving station. Synonym batched communications.
1. A unit of modulation rate.
Note: One baud corresponds to a rate of one unit interval per second, where the modulation rate is expressed as the reciprocal of the duration in seconds of the shortest unit interval.
2. A unit of signaling speed equal to the number of discrete signal conditions, variations, or events per second.
Note 1: If… (Read More →)
A synchronous code in which five equal-length bits represent one character.
Note 1: The Baudot code, which was developed circa 1880, has been replaced by the start-stop asynchronous International Alphabet No.2 (IA No.2).
Note 2: IA No.2 is not, and should not be identified as, the Baudot code.
Note 3: The Baudot code has been widely used in teletypewriter systems.
Broadband Equipment
Baseband Unit
Abbreviation for block check character.
Abbreviation for binary-coded decimal code. See binary-coded decimal notation.
Broadband Content Guide
Abbreviation for Bose-Chaudhuri-Hochquenghem code. A multilevel, cyclic, error-correcting, variable-length digital code used to correct errors up to approximately 25% of the total number of digits.
Note: BCH codes are not limited to binary codes, but may be used with multilevel phase-shift keying whenever the number of levels is a prime number or a power of a prime number, such as… (Read More →)
Abbreviation for bit-count integrity.
Abbreviation for baud.
Border Element
See radiobeacon station.
1. The main lobe of an antenna radiation pattern.
2. A column of light.
Note: A beam may be parallel, divergent, or convergent. [After FAA]
Of an electromagnetic beam, along any specified line that (a) intersects the beam axis and (b) lies in any specified plane normal to the beam axis, the distance between the two diametrically opposite points at which the irradiance is a specified fraction, e.g., ½ or 1/, of the beam's peak irradiance.
Note 1: Beam diameter is usually used to characterize… (Read More →)
Of an electromagnetic beam, in any plane that intersects the beam axis, the increase in beam diameter with distance from the aperture from which the beam emerges.
Note 1: Beam divergence is usually used to characterize electromagnetic beams in the optical regime, i.e., cases in which the aperture from which the beam emerges is very large with respect to the… (Read More →)
Changing the direction of the main lobe of a radiation pattern.
Note: In radio systems, beam steering may be accomplished by switching antenna elements or by changing the relative phases of the rf signals driving the elements. In optical systems, beam steering may be accomplished by changing the refractive index of the medium through which the beam is transmitted or… (Read More →)
A device for dividing an optical beam into two or more separate beams.
Note: An example of a beamsplitter is a partially reflecting mirror.
1. In the radio regime, of an antenna pattern, the angle between the half-power (3-dB) points of the main lobe, when referenced to the peak effective radiated power of the main lobe.
Note: Beamwidth is usually expressed in degrees. It is usually expressed for the horizontal plane, but may also be expressed for the vertical plane.
2. For the optical… (Read More →)
See B channel.
A telecommunications service that allows transmission of user-information signals between user-network interfaces. See B channel, service access.
See heterodyne.
Synonym paging, radio paging.
A unit of measure of ratios of power levels, i.e., relative power levels.
Note 1: The number of bels for a given ratio of power levels is calculated by taking the logarithm, to the base 10, of the ratio. Mathematically, the number of bels is calculated as B = log10(P1/P2) where P1 and P2 are power levels.
Note 2: The… (Read More →)
A transmission control character that is used when there is a need to call for user or operator attention in a communications system, and that usually activates an audio or visual alarm or other attention-getting device.
Historically, any of the 22 operating companies that were divested from AT&T by court order.
Note: Cincinnati Bell Telephone Co. and Southern New England Bell Telephone Co. were not included.
1. [A] formal state-transition model of a computer security policy that describes a formal set of access controls based on information sensitivity and subject authorizations. [INFOSEC].
2. A formal state transition model of computer security policy that describes a set of access control rules. In this formal model, the entities in a computer system are divided into abstract sets of… (Read More →)
See macrobend loss, microbend loss.
[In INFOSEC a] condition of cryptographic data that cannot be compromised by human access. [INFOSEC-99]
[In security, a] nonhostile environment that may be protected from external hostile elements by physical, personnel, and procedural security countermeasures. [INFOSEC-99]
1. Bit Error Rate,
2. Bit Error Ratio.
Acronym for bit error ratio tester.
A secondary software product test involving select or voluntary participants before the product is marketed to the general public.
Note: Participants agree to provide detailed feedback to the product's manufacturer in return for their being allowed to preview, use, and contribute to the final form of the product. [After Bahorsky]
Abbreviation for basic exchange telecommunications radio service.
Unauthorized access to a momentarily inactive terminal, of a legitimate user, assigned to a communications channel.
Abbreviation for broadband exchange.
1. Breakout Gateway Call Function;
2. Border Gateway Control Function
Border Gateway Protocol
Abbreviation for binary synchronous (bi-sync) communication.
1. A systematic deviation of a value from a reference value.
2. The amount by which the average of a set of values departs from a reference value.
3. Electrical, mechanical, magnetic, or other force (field) applied to a device to establish a reference level to operate the device.
4. In telegraph signaling systems, the development of a positive or… (Read More →)
1. Signal distortion resulting from a shift in the bias.
2. In binary signaling, distortion of the signal in which all the significant intervals have uniformly longer or shorter durations than their theoretical durations.
Note: Bias distortion is expressed in percent of the system-specified unit interval.
In the generation of pseudorandom or random numbers, pertaining to or describing a condition that renders the more likely occurrence of some numbers or patterns than others. [After X9.17]
Bearer Independent Call Control
An antenna consisting of two conical conductors, having a common axis and vertex, and extending in opposite directions.
Note 1: In a biconical antenna, excitation is applied at the common vertex.
Note 2: If one of the cones is reduced to a plane, the antenna is called a discone.
In data transmission, the condition that exists when information flow characteristics are different in each direction.
Association established between two higher layer entities for which information is transmitted between both entities. [After T1.629-1999]
See directional coupler.
The condition that exists when information flow characteristics are the same in each direction.
A format for transmission or storage of binary data in which the most significant byte (bit) appears first. [After X9.42]
French abbreviation for International Time Bureau. See International Atomic Time.
Synonym bilateral synchronization.
A synchronization control system between exchanges A and B in which the clock at exchange A controls the data received at exchange B and the clock at exchange B controls the data received at exchange A.
Note: Bilateral synchronization is usually implemented by deriving the timing from the incoming bit stream. Synonym bilateral control.
An array of parallel dipole antennas with flat reflectors, usually positioned in a line or plane.
Note 1: The spacing and dimensions of the dipoles depend on the wavelength.
Note 2: The main lobe of a fixed billboard antenna may, within limits, be steered by appropriate phasing of the respective signals to individual elements of the array. Synonym broadside antenna.
Binary MPEG format for XML
Binary
1. Pertaining to a selection, choice, or condition that has two possible different values or states.
2. Pertaining to a fixed radix numeration system that has a radix of 2.
A code, the elements of which can assume either one of two possible states.
See bit.
A constituent element of data that takes either of two values or states.
Note: Binary element should not be confused with binary digit.
The process of varying a parameter of a carrier as a function of two finite, discrete states.
1. Any notation that uses two different characters, usually the digits 0 and
1.
Note: Data encoded in binary notation need not be in the form of a pure binary numeration system; e.g., they may be represented by a Gray code.
2. A scheme for representing numbers, which scheme is characterized by the arrangements of digits in sequence, with the… (Read More →)
A number that is expressed in binary notation and is usually characterized by the arrangement of bits in sequence, with the understanding that successive bits are interpreted as coefficients of successive powers of the base
2.
Synonym bit string.
A character-oriented, data-link-layer protocol.
Note: The bi-sync protocol is being phased out of most computer communication networks in favor of bit-oriented protocols such as SDLC, HDLC, and ADCCP.
Pertaining to the representation of a decimal digit by a unique arrangement of no fewer than four binary digits.
A binary notation in which each of the decimal digits is represented by a binary numeral. Synonyms binary-coded decimal code, binary-coded decimal representation.
Synonym binary-coded decimal notation.
Synonym binary-coded decimal notation.
1. In computer, communications, and automatic data processing systems, assigning a value or referent to an identifier.
Note: Examples of binding include assigning a value to a parameter, assigning an absolute address to a virtual or relative address, and assigning a device identifier to a symbolic address or label.
2. [In security, the] process of associating a specific communications terminal… (Read More →)
An aspect of the assessment of the effectiveness of a Target of Evaluation, namely the ability of its security enforcing functions and mechanisms to work together in a way which is mutually supportive and provides an integrated and effective whole [ITSEC].
Any specific and uniquely identifiable physical human characteristic, e.g., of the retina, iris, acoustic spectrum of the voice (i.e., voiceprint), fingerprint(s), handwriting, pattern of finger lengths, etc. , that may be used to validate the identity of an individual.
Note: Biometrics provide a highly secure means of identification, for purposes of security involving, e.g., Internet communications and cryptosystems.
[In INFOSEC] automated methods of authenticating or verifying an individual based upon a physical or behavioral characteristic. [INFOSEC-99]
Synonym phase-shift keying.
1. A signal that may assume either of two polarities, neither of which is zero.
Note 1: A bipolar signal may have a two-state non-return-to-zero (NRZ) or a three-state return-to-zero (RZ) binary coding scheme.
Note 2: A bipolar signal is usually symmetrical with respect to zero amplitude, i.e., the absolute values of the positive and negative signal states are nominally… (Read More →)
In a bipolar alternate mark inversion (AMI) signal, a "one" condition (mark, pulse) having the same polarity as its predecessor. [After T1.408-1990]
In a transparent material, anisotropism of the refractive index, which varies as a function of polarization as well as orientation with respect to the incident ray.
Note 1: The term "birefringence" means, literally, "double refraction. "
Note 2: All crystals except those of cubic lattice structure exhibit some degree of anisotropy with regard to their physical properties, including refractive index.… (Read More →)
See birefringence.
The phenomenon stating that, for a category size of 365 (the number of days in a year), after only 23 people are gathered, the probability is greater than
0. 5 that at least two people have a common birthday (month and day).
Note: The birthday phenomenon applied to DES encryption means that where category size is 264, this same probability… (Read More →)
Pertaining to a device capable of assuming either one of two stable states.
Synonym flip-flop.
Synonym flip-flop.
Synonym flip-flop.
1. Abbreviation forbinary digit.
1. A character used to represent one of the two digits in the numeration system with a base of two, and only two, possible states of a physical entity or system.
2. In binary notation either of the characters 0 or
1.
3. A unit of information equal to one binary decision or the designation of… (Read More →)
The sequence of bits used to encode a character.
The number of bits recorded per unit length, area, or volume.
Note: Bit density is the reciprocal of bit pitch. Synonym recording density.
Synonym bits per pixel.
A bit that is transferred from the source to the destination within the assigned time slot, but that, when delivered, is of a different value from that sent from the source. [After T1.503-1989] [After T1.507-1996]
Deprecated term. See bit error ratio.
A test performed on a digital facility/service which counts erroneous bits and divides them by the bits sent over a set period of time. Usually expressed as a power of 10 e. g. (1 x $ 10 sup -6 $).
1. The number of erroneous bits divided by the total number of bits transmitted, received, or processed over some stipulated period.
Note 1: Examples of bit error ratio are (a) transmission BER, i.e., the number of erroneous bits received divided by the total number of bits transmitted; and (b) information BER, i.e., the number of erroneous decoded (corrected) bits divided… (Read More →)
A testing device that compares a received data pattern with a known transmitted pattern to determine the level of transmission quality.
A method of error monitoring. If even parity is used, an N bit code is generated by the transmitting equipment over a specified portion of the signal in such a manner that the first bit of the code provides even parity over the first bit of all N-bit sequences in the covered portion of the signal, the second bit provides… (Read More →)
See bit, character interval, unit interval.
1. The changing of the state of a bit to the opposite state.
2. The changing of the state that represents a given bit, i.e., a 0 or a 1, to the opposite state.
Note: For example, if a 1 is represented by a given polarity or phase at one stage in a circuit, the 1 is represented by the… (Read More →)
In embedded ADPCM (adaptive differential pulse-code modulation), the process of discarding the enhancement bits. [T1.310-1991]
The practice of establishing, within a code set, a number of subsets that have an identical bit representation except for the state of a specified bit.
Note: An example of bit pairing occurs in the International Alphabet No.5 and the American Standard Code for Information Interchange (ASCII), where the upper case letters are related to their respective lower case letters… (Read More →)
The amount of time required to transmit a logical one or a logical zero. [T1.106-1988]
A character position in a word in a binary notation.
1. In a bit stream, the number of bits occurring per unit time, usually expressed in bits per second.
Note: For n-ary operation, the bit rate is equal to log2n times the rate (in bauds), where n is the number of significant conditions in the signal.
2. The rate of transmission of information in binary (two state) form in bits… (Read More →)
In digital carrier systems, the practice or technique of preempting, at regular intervals and for the purpose of transmitting signaling information, one digit time slot that (a) is associated with the given user channel for which signaling is required, and (b) is used primarily for transporting encoded speech via that channel.
Note 1: Bit robbing is an option in networks… (Read More →)
In digital transmission, the loss of a bit or bits, caused by variations in the respective clock rates of the transmitting and receiving devices.
Note: One cause of bit slippage is overflow of a receive buffer that occurs when the transmitter's clock rate exceeds that of the receiver. This causes one or more bits to be dropped for lack of… (Read More →)
A sequence of bits.
Note: In a bit stream, individual bit strings may be separated by data delimiters. Synonym binary string.
The insertion of noninformation bits into data.
Note 1: Stuffed bits should not be confused with overhead bits.
Note 2: In data transmission, bit stuffing is used for various purposes, such as for synchronizing bit streams that do not necessarily have the same or rationally related bit rates, or to fill buffers or frames. The location of the stuffing bits… (Read More →)
Synchronization in which the decision instant is brought into alignment with the received bit, i.e., the basic signaling element.
Operation in which data circuit terminating equipment (DCE), data terminal equipment (DTE), and transmitting circuits are all operated in bit synchronism with a clock.
Note 1: In bit synchronous operation, clock timing is usually delivered at twice the modulation rate, and one bit is transmitted or received during each clock cycle.
Note 2: Bit synchronous operation is sometimes erroneously referred… (Read More →)
In data transmission, an operation in which manual, semiautomatic, or automatic shifts in the data modulation rate are accomplished by gating or slewing the clock modulation rate.
Note: For example, bit-by-bit asynchronous operation may be at 50 b/s one moment and at 1200 b/s the next moment.
1. In message communications, the preservation of the exact number of bits that are in the original message.
2. In connection-oriented services, preservation of the number of bits per unit time.
Note: Bit-count integrity is not the same as bit integrity, which requires that the delivered bits correspond exactly with the original bits.
A characteristic of some digital data transmission systems that impose no restrictions on, or modification of, the transmitted bit sequence.
Note: Bit-sequence-independent protocols are in contrast to protocols that reserve certain bit sequences for special meanings, such as the flag sequence, 01111110, for HDLC, SDLC, and ADCCP protocols.
Pertaining to the control of digital equipment in which operations are performed one step at a time at the applicable bit rate.
1. In bit-oriented systems, the transmission of bit strings.
2. In character-oriented systems, the transmission of bit streams that represent characters.
Note: In bit-stream transmission, the bits usually occur at fixed time intervals, start and stop signals are not used, and the bit patterns follow each other in sequence without interruption.
Digital transmission in which two binary pulse trains are combined for transmission over a channel in which the available bandwidth is sufficient for transmission of only one of the two pulse trains at a time if they remain in binary form.
In computer graphics, a representation of an image (which category includes characters) by code or a coding scheme that defines (a) the position of pixels by row (horizontal position) and column (vertical position), and (b) individual pixel characteristics such as gray scale and color. Loosely synonymous with raster.
In computer graphics, an image created with, or represented by, a matrix of pixels. Synonym [loosely] raster graphics.
Abbreviation for Because It's Time NETwork. An early (ca.1981) store-and-forward digital communications network interconnecting universities and research institutions worldwide.
Note: BITNET, which is now obsolete, had a purpose akin to that of the present Internet, but was not nearly so robust, and at a speed of only 9600 b/s, it could not support the data rates presently attainable via the… (Read More →)
Building Integrated Timing Systems
A unit used to express the linear bit density of data in storage.
Note: The abbreviation "bpi" is not in accordance with international standards, and is therefore deprecated.
In a digitized image, the number of bits used to represent the luminance (brightness, gray scale) and chroma (color) information contained in each pixel. Synonym bit depth.
A unit used to express the number of bits passing a designated point per second.
Note 1: For example, for two-condition serial transmission in a single channel in which each significant condition represents a bit, i.e., a 0 or a 1, the bit rate in bits per second and the baud have the same numerical value only if each bit… (Read More →)
Abbreviation for bus interface unit. See network interface device.
1. [A] designation applied to telecommunications and automated information systems, and to associated areas, circuits, components, and equipment, in which only unclassified signals are processed.
Note: Encrypted signals are unclassified. [NIS]
2. Designation applied to information systems, and to associated areas, circuits, components, and equipment, in which national security information is not processed. [INFOSEC-99]
A generic term for a single-purpose device having limited functionality.
Note: A black box is usually represented in schematic drawings as a geometric figure, possibly with defined connector(s), but no details with respect to the type or number of internal components that enable it to perform its defined task.
A composite color video signal comprised of sync, color burst, and black video.
Note: Black burst is used to synchronize (genlock) other video sources to the same sync and color information. Black burst generators are used in video studios to "lock" the entire facility to a common signal ("house sync" or "house black"). [After Silicon]
1. In facsimile systems using amplitude modulation, that form of transmission in which the maximum transmitted power corresponds to the maximum density of the subject.
2. In facsimile systems using frequency modulation, that form of transmission in which the lowest transmitted frequency corresponds to the maximum density of the subject.
Of a television baseband signal (e.g., NTSC composite video), the voltage level corresponding to black or to the maximum limit of black peaks.
Noise that has a frequency spectrum of predominately zero power level over all frequencies except for a few narrow bands or spikes.
Note: An example of black noise in a facsimile transmission system is the spectrum that might be obtained when scanning a black area in which there are a few random white spots. Thus, in the time domain, a… (Read More →)
1. In facsimile systems using amplitude modulation, recording in which the maximum received power corresponds to the maximum density of the record medium.
2. In a facsimile system using frequency modulation, recording in which the lowest received frequency corresponds to the maximum density of the record medium.
In facsimile, the signal resulting from scanning a maximum-density area of the object.
A signal that represents only unclassified or encrypted information, usually in cryptographic systems.
See cipher-text.
A totally absorbing body that does not reflect radiation.
Note: In thermal equilibrium, a blackbody absorbs and radiates at the same rate; the radiation will just equal absorption when thermal equilibrium is maintained.
The interference that is caused by the presence of an AM broadcast signal of one volt per meter (V/m) or greater strengths in the area adjacent to the antenna of the transmitting station. The 1 V/m contour is referred to as the blanket contour and the area within this contour is referred to as the "blanket area. " [47CFR]
In the vicinity of a transmitting antenna, the area in which the signal from that antenna interferes with the reception of other signals.
Note: The blanketing area around a given transmitting antenna depends on the selectivity and sensitivity of the receiver, and on the respective levels of the other signals in question.
1. The period of time in which no video image is displayed. [JP 1-02]
2. In graphic display, the suppression of the display of one or more display elements or display segments.
In raster-scanned television technology, the period between (a) the end of one horizontal scanning line and the beginning of the next (the horizontal blanking interval), or (b) the end of one field and the beginning of the next (the vertical blanking interval), during which the display of picture information is suppressed.
Note 1: Blanking intervals were a necessary part of… (Read More →)
In a baseband television signal, the DC level (nominally 0 volts) from which the amplitudes of the various components of the signal are measured. Conventionally, the viewable parts of the signal (except subcarriers) are positive with respect to blanking, while the synchronizing pulses are negative with respect to blanking. In North American NTSC signals, the darkest portions of the image… (Read More →)
Transmission without obtaining a receipt, i.e., acknowledgement of reception, from the intended receiving station.
Note: Blind transmission may occur or be necessary when security constraints, such as radio silence, are imposed, when technical difficulties with a sender's receiver or receiver's transmitter occur, or when lack of time precludes the delay caused by waiting for receipts.
In graphic display devices, an intentional periodic change in the intensity of one or more display elements or display segments.
1. A group of bits or digits that is transmitted as a unit and that may be encoded for error-control purposes.
2. A string of records, words, or characters, that for technical or logical purposes are treated as a unit.
Note 1: Blocks (a) are separated by interblock gaps, (b) are delimited by an end-of-block signal, and (c) may contain… (Read More →)
In the processing or transmission of digital data, an error-control procedure that is used to determine whether a block of data is structured according to given rules.
A character added to a transmission block to facilitate error detection.
Note: In longitudinal redundancy checking and cyclic redundancy checking, block check characters are computed for, and added to, each message block transmitted. This block check character is compared with a second block check character computed by the receiver to determine whether the transmission is error free.
An error detection and/or correction code in which the encoded block consists of N symbols, containing K information symbols (K<N) and N-K redundant check symbols, such that most naturally occurring errors can be detected and/or corrected.
A diagram of a system, a computer, or a device in which the principal parts are represented by suitably annotated geometrical figures to show both the basic functions of the parts and their functional relationships.
In the received image in video systems, distortion characterized by the appearance of an underlying block encoding structure.
A process by which one or more of the less significant bits of all the samples stored in a packet are dropped to alleviate congestion. [T1.509-1995]
In a block, the ratio of the number of user information bits to the total number of bits.
Note: For a given block scheme, block efficiency represents the maximum possible efficiency for a given block scheme transmitted over a perfect transmission link.
A block within which at least one bit error occurs when the block is transferred from the source to the destination within the time slot assigned. [After T1.503-1996]
The Service Provider to which a thousands-block (NXX-X) has been assigned for use.
The number of data units, such as bits, bytes, characters, or records, in a block.
The designation of one or more bits in a block as parity bits used to force the block into a selected parity, either odd or even.
Note: Block parity is used to assist in error detection or correction.
The process, initiated by a single action, of transferring one or more blocks of data.
A coordinated sequence of user and telecommunication system activities undertaken to effect transfer of an individual block from a source user to a destination user.
Note: A block transfer attempt begins when the first bit of the block crosses the functional interface between the source user and the telecommunication system. A block transfer attempt ends either in successful block transfer… (Read More →)
The average ratio of user information bits to total bits in successfully transferred blocks.
Failure to deliver a block successfully.
Note: The principal block transfer failure outcomes are: lost block, misdelivered block, and added block.
The number of successful block transfers during a performance measurement period divided by the duration of the period.
The average value of the duration of a successful block transfer attempt.
Note: A block transfer attempt is successful if (a) the transmitted block is delivered to the intended destination user within the maximum allowable performance period and (b) the contents of the delivered block are correct.
The expected block-error ratio.
1. The ratio of the number of incorrectly received blocks to the total number of blocks transferred.
Note: The block-error ratio is calculated using empirical measurements. Multiple block-error ratios may be used to predict block-error probability.
2. The ratio of the number of blocks that contain at least one bit in error to the total number of blocks transmitted in… (Read More →)
The ratio of the number of lost blocks to the total number of block transfer attempts during a specified period.
The ratio of the number of misdelivered blocks to the total number of block transfer attempts during a specified period.
A blocked call is said to have occurred when a call presented to a telecommunications Service Provider (SP) facility cannot be completed due to Blocking.
1. The formatting of data into blocks for purposes of transmission, storage, checking, or other functions.
2. Denying access to, or use of, a facility, system, or component.
3. The failure of a telecommunications network to meet a user service demand, because of the lack of an available communications path.
In telephone traffic engineering, a criterion that specifies the maximum number of calls or service demands that fail to receive immediate service.
Note: The blocking criterion is usually expressed in probabilistic notation, such as P.001.
The number of records in a block.
Note: The blocking factor is calculated by dividing the block length by the length of each record contained in the block. If the records are not of the same length, the average record length may be used to compute the blocking factor. Synonym grouping factor.
A specific probability distribution function intended to model calling patterns of users who fail to find available facilities.
Note: There are several blocking formulas. The applicability of each to a given situation depends on its underlying assumptions regarding caller behavior.
In telecommunications, a network that has fewer transmission paths than would be required if all users were to communicate simultaneously.
Note: Blocking networks are used because not all users require service simultaneously. Certain statistical distributions apply to the patterns of user demand.
In a spectrum of frequencies, a region in which the spectral density, i.e., power per hertz, is proportional to the frequency.
See chroma keying.
A low-power, short-range, rf technology that allows the connection of intelligent communications devices or appliances in a household or an office in a short-range wireless network. Examples of Bluetooth applications are transferring data between cell phones, radios, pagers, personal digital assistants, notebook computers, video and still cameras, audio players, and local area networks.
In television and video systems, a global distortion over the entire image, characterized by reduced sharpness of edges and limited spatial detail. [T1.80
1. 02-1996]
Broadcast/Multicast Control
Broadcast Notification
A type of bayonet (twist-lock) coaxial connector commonly used in applications involving small (e.g., RG-59, RG-62) coaxial cables.
Backus-Naur Form
Abbreviation for Bell Operating Company.
Business Operations Framework
The number that relates the average energy of a molecule to its absolute temperature.
Note: Boltzmann's constant is approximately
1. 38 × 10-23 J/K (joules/kelvin).
Business Operations Map
An electrical connection that provides a low-resistance path between two conducting surfaces.
1. In electrical engineering, the process of connecting together metal parts so that they make low resistance electrical contact for direct current and lower frequency alternating currents. [JP1]
2. The process of establishing the required degree of electrical continuity between two or more conductive surfaces that are to be joined.
A name or address of an Internet resource, stored in a software file at a user's site, e.g., in a desktop computer, for convenient future use.
Note: An example of a bookmark is an entry in a bookmark file (or bookmark list) such as maintained within or by a Web browser for the convenience of the user in revisiting a… (Read More →)
Synonym hotlist.
1. A mathematical function that describes Boolean operations.
2. A switching function in which the number of possible values of the function and each of its independent variables is two.
1. Any operation in which each of the operands and the result take one of two values.
Note: Typical states are "0 or 1," "on or off," "open or closed," or "present or absent. "
2. An operation that follows the rules of Boolean Algebra.
To take some kind of assenting action to initiate computer bootup, e.g., to turn on the primary power (often referred to as initiating a cold bootup) or restart a powered-up computer (often referred to as initiating a hot bootup or hot reboot).
Bootstrap Protocol
1. A technique or device designed to bring about a desired state by means of its own action.
2. That part of a computer program that may be used to establish another version of the computer program.
3. The automatic procedure whereby the basic operating system of a processor is reloaded following a complete shutdown or loss of memory.
4.… (Read More →)
In computer science, the initial sequence of events (usually preprogrammed in firmware present in the computer) that are necessary to start a computer; i.e., to initialize its operating system, load programs into memory, etc. , when (a) it is first powered up, or (b) when already powered up, upon some kind of assenting action by the user.
1. The physical axis of a directional antenna.
2. To align a directional antenna, using either an optical procedure or a fixed target at a known location.
See BCH code.
Baseline Operating Systems Security
Abbreviation for robot. A relatively small and focused computer application that (a) runs continuously, in the background (i.e., simultaneously), as other programs are being run, and (b) responds automatically to a user's activity. Synonyms agent, droid, infobot.
Note 1: Many bots are created for the benefit of the user, e.g., those that send information upon request, perform automated searches, or… (Read More →)
To return, to the sender, e-mail that is, for whatever reason, undeliverable to its intended destination.
Note 1: There are various reasons why e-mail may be bounced. Examples are an incorrect address, problems with local network facilities, and problems with telecommunications links.
Note 2: Bounced e-mail is often accompanied by an error message describing the reason that it was not… (Read More →)
The hour in which the highest usage is measured for any day. The readings are on the hour or half hour. The selected clock hour will vary from day to day, depending on the measured usage. [T
1. Rpt 11-1991]
In an optical fiber, a mode that (a) has a field intensity that decays monotonically in the transverse direction everywhere external to the core and (b) does not lose power to radiation.
Note: Except for single-mode fibers, the power in bound modes is predominantly contained in the core of the fiber. [After 2196] Synonymstrapped mode.
Synonym guided ray.
1. [In security,] Software, hardware, or a physical barrier that limits access to a system or part of a system. [INFOSEC-99]
2. Synonym [in networking]section boundary.
Business Process Execution Language
See bits per inch.
Broadband Power Line
Business Process Management
Business Process Modeling Notation
Broadband Passive Optical Network
bits per second
1. An essential part of many fiber-optic cable designs, consisting of a layer of woven yarn.
Note: In the case of single-fiber loose-buffered or two-fiber "zip-cord" loose-buffered fiber-optic cables, the braid is situated between the buffer tube and jacket. In the case of cables having multiple buffer tubes, the braid is usually situated between the inner jacket and outer jacket.… (Read More →)
1. In a computer program, a conditional jump or departure from the implicit or declared order in which instructions are being executed.
2. To select a branch, as in definition ,
1.
3. A direct path joining two nodes of a network or graph.
4. In a power distribution system, a circuit from a distribution device (power panel) of a… (Read More →)
A network point where two or more possible routes through different intermediate networks from the origination network to destination network physically diverge. A branch point may occur in any network except the destination network. [T1.118-1992]
A network used for transmission or reception of signals over two or more channels.
A repeater with two or more outputs for each input.
The circumvention or disablement of some element of computer security, with or without detection, which could result in a penetration of (a) the affected computer's software or data base(s), or (b) another device or network to which the affected computer may also be connected. [After 2382-pt.8]
1. An assembly of circuits or parts used to prove the feasibility of a device, circuit, system, or principle with little or no regard to the final configuration or packaging of the parts.
2. To prepare a breadboard.
1. In dial-pulse signaling, that portion of the dial pulse in which the pulsing circuit is in its high-impedance condition. [T1.405-1989]
2. In dial-pulse signaling, that portion of the dial pulse in which the pulsing circuit is on-hook. [T1.409-1996]
A testing device that permits a user to access individual leads of an interface cable, using jumper wires, in order to monitor, switch, or patch the electrical output of the cable.
A multifiber fiber-optic cable design in which individual fibers, usually tight-buffered, are surrounded by separate strength members and jackets, which are in turn enveloped by a common jacket.
Note 1: The breakout cable facilitates easy installation of fiber-optic connectors. All that need be done to prepare the ends of the cable to receive connectors is to remove the outer jacket,… (Read More →)
A kit of materials, composed of an outer jacket in which is contained a strength member consisting of a bundle of usually aramid yarn, which jacket and yarn may be slipped over a loose buffer tube containing a single fiber, to convert the buffer tube and fiber to a complete single-fiber cable to which a fiber-optic connector may be directly… (Read More →)
For a plane electromagnetic wavefront incident on a plane boundary between two dielectric media having different refractive indices, the angle of incidence at which transmittance from one medium to the other is unity when the wavefront is linearly polarized with its electric vector parallel to the plane of incidence.
Note 1: Brewster's angle B, is given by where n1 and… (Read More →)
See Brewster's angle.
Abbreviation for basic rate interface.
An informal name for a hand-held radiotelephone unit. Synonymsradio personal terminal.
A low-pass filter with a steep cut-off (such as 20 dB/octave or greater), such that a negligible amount of higher frequency information passes.
Note: A brick wall filter typically has uniform group delay. [After SMPTE]
1. In communications networks, a device that (a) links or routes signals from one ring or bus to another or from one network to another, (b) may extend the distance span and capacity of a single LAN system, (c) performs no modification to packets or messages, (d) operates at the data-link layer of the OSI--Reference Model (Layer 2), (e) reads… (Read More →)
A device that electrically or physically removes bridged telephone pairs.
Note: Relays, saturable inductors, and semiconductors are used as bridge lifters.
Synonym hybrid coil.
A ship station operating in the port operations service in which messages are restricted to navigational communications and which is capable of operation from the ship's navigational bridge or, in the case of a dredge, from its main control station, operating on a frequency or frequencies in the 156-162 MHz band. [NTIA]
The part of a signaling system in which ringers associated with a particular line are connected across that line.
Any portion of a loop that is not in the direct talking path between the central office and the service user's terminating equipment. A bridged tap may be an unused cable pair connected at an intermediate point or an extension of the circuit beyond the service user's location.
Note: A bridged tap creates an impedance mismatch within the transmission line,… (Read More →)
A parallel connection used to extract some of the signal energy from a circuit, usually with negligible effect on the normal operation of the circuit.
At a given frequency, the loss that results when an impedance is connected across a transmission line.
Note: Bridging loss is expressed as the ratio, in dB, of the signal power delivered, prior to bridging, to a given point in a system downstream from the bridging point, to the signal power delivered to the given point after bridging.
An attribute of visual perception in which a source appears to emit a given amount of light.
Note 1: "Brightness" should be used only for nonquantitative references to physiological sensations and perceptions of light.
Note 2: "Brightness" was formerly used as a synonym for the photometric term "luminance" and (incorrectly) for the radiometric term "radiance. "
See Brillouin scattering.
In a physical medium, scattering of lightwaves, caused by thermally driven density fluctuations.
Note: Brillouin scattering may cause frequency shifts of several gigahertz at room temperature. [From Weik '89]
1. Synonym [in analog technology] wideband.
2. A descriptive term for evolving digital technologies that provide consumers a signal-switched facility offering integrated access to voice, high-speed data service, video-demand services, and interactive delivery services. [FCC]
A communications switch capable of interconnecting channels having bandwidths greater than voice bandwidth.
An Integrated Services Digital Network (ISDN) offering broadband capabilities.
Note 1: B-ISDN is an ITU-T proposed (originally a CCITT-proposed) service that may (a) include interfaces operating at data rates from 150 to 600 Mb/s, (b) use asynchronous transfer mode (ATM) to carry all services over a single, integrated, high-speed packet-switched network, (c) have LAN interconnection capability, (d) provide access to… (Read More →)
See [in analog technology] wideband.
The transmission of signals that may be simultaneously received by stations that usually make no acknowledgement.
A space station in the broadcasting-satellite service (sound broadcasting). [NTIA]
A radiocommunication service in which the transmissions are intended for direct reception by the general public. This service may include sound transmissions, television transmissions or other types of transmissions. [NTIA] [RR]
A station in the broadcasting service. [NTIA] [RR]
A radiocommunication service in which signals transmitted or retransmitted by space stations are intended for direct reception by the general public. In the broadcasting-satellite service, the term "direct reception" shall encompass both individual reception and community reception. [NTIA] [RR]
Synonym billboard antenna.
A combined bridge and router that operates without protocol restrictions, routes data using a protocol it supports, and bridges data it cannot route.
Any computer software program for reading hypertext.
Note 1: Browsers are usually associated with the Internet and the World Wide Web (WWW).
Note 2: A browser may be able to access information in many formats, and through different services including HTTP and FTP.
[The] act of searching through information-system (IS) storage to locate or acquire information without necessarily knowing of the existence or the format of the information being sought. [INFOSEC-99]
In security, an attack that requires trying all (or a large fraction of all) possible values until the right value is found. Synonym [loosely] exhaustive attack.
Abbreviation for basic serving arrangement.
Abbreviation for basic service element.
Abbreviation for British Standards Institution.
Business Support System
Base Station Switching System
Base Transceiver Station
Synonym proration.
1. A routine or storage medium used to compensate for a difference in rate of flow of data, or time of occurrence of events, when transferring data from one device to another.
Note: Buffers are used for many purposes, such as (a) interconnecting two digital circuits operating at different rates, (b) holding data for use at a later time, (c)… (Read More →)
Synonym buffer.
Common coding style is to never allocate large enough buffers, and to not check for overflows. When such buffers overflow, the executing program (daemon or set-uid program) can be tricked in doing some other things. Generally this works by overwriting a function's return address on the stack to point to another location.
1. A concealed microphone or listening device or other audiosurveillance device. [JP 1-02]
2. A mistake in a computer program.
3. To install means for audiosurveillance. [JP 1-02]
4. A semiautomatic telegraph key.
5. A mistake or malfunction.
The maximum variable transmission and processing delay that is permitted in a wideband network. Each PVP (packetized voice protocol) node records the delay that it adds and updates accordingly the TS (time stamp) value in the packet header. When the terminating endpoint of a PVP node receives a voice packet, the provisioned build-out and the time stamp value are compared.… (Read More →)
The process of adding a combination of inductance, capacitance, and resistance to a cable pair so that its electrical length may be increased by a desired amount to control impedance and loss characteristics. Synonym line buildout.
Simultaneous encryption of all channels of a multichannel telecommunications link. [INFOSEC]
Note: A single encryption device can be used to encrypt the output signal from a multiplexer.
A form of electronic messaging in which addressed messages or files are entered by users into a computer or network of computers.
Note: Other users may obtain, at their convenience and request, messages or files available to them. Synonymelectronic bulletin board.
A frame-alignment signal in which the signal elements occupy consecutive digit positions.
1. A group of optical fibers or electrical conductors, such as wires and coaxial cables, usually in a single jacket.
Note: Multiple bundles of optical fibers or electrical conductors may be placed in the same cable. [After 2196]
2. In cryptography, the three cryptographic keys (K1, K2, K3) used with a TDEA mode. [After X9.52] [After X9.65]
See direct-buried cable.
See direct-buried cable.
1. In data communications, a sequence of signals, noise, or interference counted as a unit in accordance with some specific criterion or measure.
2. To separate continuous-form or multipart paper into discrete sheets.
Deprecated synonym for isochronous burst transmission.
In a packet-switched network, a switching capability in which each network switch extracts routing instructions from an incoming packet header to establish and maintain the appropriate switch connection for the duration of the packet, following which the connection is automatically released.
Note: In concept, burst switching is similar to connectionless mode transmission, but it differs from the latter in that… (Read More →)
1. Transmission that combines a very high data signaling rate with very short transmission times.
2. Operation of a data network in which data transmission is interrupted at intervals.
Note: Burst transmission enables communications between data terminal equipment (DTEs) and a data network operating at dissimilar data signaling rates. Synonym data burst.
One or more conductors or optical fibers that serve as a common connection for a group of related devices.
See network topology.
See network topology.
The iconectiv® Business Integrated Routing and Rating Database System is a centrally maintained database into which Service Providers (SP) or their agents enter data that supports the routing and rating of calls. Data reflects all North American Numbering Plan (NANP) (CEntral Office (CO) Code (NPA-NXX) and Thousands-Block (NPA-NXX-X) assignments and is closely aligned with many of the processes and data… (Read More →)
Deprecated term. See busy signal.
In a communications system, the sliding 60-minute period during which occurs the maximum total traffic load in a given 24-hour period.
Note 1: The busy hour is determined by fitting a horizontal line segment equivalent to one hour under the traffic load curve about the peak load point.
Note 2: If the service time interval is less than 60 minutes,… (Read More →)
During a 1-year cycle, the period of 3 consecutive months having the highest busy hour traffic.
1. In telephony, an audible or visual signal that indicates that no transmission path to the called number is available. Synonym busy tone.
2. In telephony, an audible or visual signal that indicates that the called number is occupied or otherwise unavailable. Synonym reorder tone.
In telephony, a test made to determine whether certain facilities, such as a subscriber line or a central office trunk, are available for use.
Synonym busy signal.
In a public switched telephone network, a network-provided service feature that permits an attendant to verify the busy or idle state of station lines and to break into the conversation.
Note: A 440-Hz tone is applied to the line for 2 seconds, followed by a
0. 5-second burst every 10 seconds, to alert both parties that the attendant is connected… (Read More →)
Abbreviation for bandwidth.
1. The use of any telecommunications facilities or services that circumvents those of the local exchange common carrier.
Note: Bypass facilities or services may be either customer-provided or vendor-supplied.
2. An alternate circuit that is routed around equipment or system component.
Note: Bypasses are often used to allow system operation to continue when the bypassed equipment or a system component… (Read More →)
A sequence of contiguous bits (usually 8) considered as a unit.
Note: In pre-1970 literature, "byte" referred to a variable-length bit string. Since that time, the usage has changed so that now it almost always refers to an 8-bit string. This usage predominates in computer and data transmission literature; when so used, the term is synonymous with "octet. "
Showing 1–379 of 379 results