L-pad
A pad composed of two discrete components, one series component and one shunt component.
Note: In schematic representation, the components resemble the upper-case letter "L," hence the name.
Select a term name to open its entry and any media references. Longer definitions end with a “Read More” link.
Loading results…
A pad composed of two discrete components, one series component and one shunt component.
Note: In schematic representation, the components resemble the upper-case letter "L," hence the name.
Layer 2 Tunneling Protocol
1. An identifier within or attached to a set of data elements.
2. One or more characters that (a) are within or attached to a set of data elements and (b) represent information about the set, including its identification.
3. In communications, information within a message that is used to identify specific system parameters, such as the particular circuit with… (Read More →)
A computer or server that supplies content labels or Web-site ratings. Synonym rating server. [Bahorsky]
In integrated services digital networks, (ISDN), a time-ordered set of all block payloads that have labels containing the same information, i.e., containing the same identifiers.
In integrated services digital networks (ISDN), an interface structure that provides telecommunications services and signaling by means of labeled channels.
In integrated services digital networks (ISDN), multiplexing by concatenation of the blocks of the channels that have different identifiers in their labels.
In integrated services digital networks (ISDN), a labeled channel in which the block payloads or the duration of each successive block is random.
Use of sophisticated signal recovery equipment in a laboratory environment to recover information from data storage media. [INFOSEC-99]
Lawfully Authorized Electronic Surveillance
The interval between a Toll-Free Numbers reservation in the 800 Service Management System (SMS/800) and its conversion to Working Status, as well as the period of time between disconnection or cancellation of a Toll-Free Number and the point at which that Toll-Free Number may be reassigned to another Toll-Free Subscriber.
See Lambertian source.
See Lambertian source.
An optical source that obeys Lambert's cosine law, i.e., that has an intensity directly proportional to the cosine of the angle from which it is viewed.
Note: Conventional (surface-emitting) LEDs are approximately Lambertian. They have a large beam divergence. This results in a radiation pattern that resembles a sphere. Thus, most of their total optical output is not coupled into… (Read More →)
See Lambertian source.
Synonym Lambertian source.
An application software package specifically designed to operate in a local-area-network environment.
See network operating system.
An informal name for conventional telephone facilities.
Note: Land lines include conventional twisted-pair lines, carrier facilities, and microwave radio facilities for supporting a conventional telephone channel, but do not include satellite links or mobile telephone links using radio transmissions.
A mobile service between base stations and land mobile stations, or between land mobile stations. [NTIA] [RR] [47CFR]
A mobile station in the land mobile service capable of surface movement within the geographical limits of a country or continent. [NTIA] [RR] [47CFR]
A mobile-satellite service in which mobile Earth stations are located on land. [NTIA] [RR]
A station in the mobile service not intended to be used while in motion. [NTIA] [RR] [47CFR]
1. In facsimile, the mode for scanning lines across the longer dimension of a rectangular object, i.e., rectangular original.
2. In computer graphics, the orientation of an image in which the longer dimension is horizontal.
3. An orientation of printed text on a page such that the lines of text are parallel to the long dimension of the page.
Note:… (Read More →)
A set of characters, conventions, and rules that is used for conveying information.
A program that performs tasks, such as translating and interpreting, required for processing a specified programming language.
Note: Examples of language processors include a Fortran processor and a COBOL processor.
The interface between applications and application platforms based on language-independent binding APIs and consistent with the paradigms used for a specific programming language [POSIX.0].
A specification that facilitates the management and development of consistent language-binding standards [POSIX.0]
The Data Link Layer protocol as specified by ITU-T Recommendation X.25 (1989).
Abbreviation for link access procedure D. A link protocol used in ISDN.
Specially constructed large prime numbers, viz. , p1, p2, q1, and q2, each > 2100, where p1|p-1, p2|p+1, q1|q-1, and q2|q+1, where p and q are the private prime factors. [After X9.31]
Acronym for light amplification by stimulated emission of radiation. A device that produces a coherent beam of optical radiation by stimulating electronic, ionic, or molecular transitions to higher energy levels so that when they return to lower energy levels they emit energy.
Note 1: Laser radiation may be either temporally coherent, spatially coherent, or both.
Note 2: The degree of… (Read More →)
An abrupt change of the center wavelength of a laser, caused by laser instability.
Synonym injection laser diode.
See optical disk.
Technical and geolocation intelligence derived from laser systems; a subcategory of electro-optical intelligence. [JP 1-02]
Synonym active laser medium.
See laser.
The lowest excitation level at which laser output is dominated by stimulated emission rather than by spontaneous emission.
Acronym for laser intelligence.
Synonym automatic redial.
A queuing discipline in which entities in a queue leave in the reverse order of the sequence in which they arrive.
Note: Service, when available, is offered to the entity that has been in the LIFO queue the shortest time.
Acronym for local access and transport area.
1. In fiber optics, a loss of optical power at a splice or connector, caused by a lateral, i.e., transverse, offset of the mating fiber cores, which offset causes an imperfect transfer of the optical signal from the "transmitting" fiber to the "receiving" fiber.
Note: The effect of a given amount of lateral offset will depend on other parameters such… (Read More →)
1. A partially ordered mathematical set for which every pair of elements has a greater lower bound and a least upper bound [CESG].
Note: A lattice may be used to represent the relationship between security classes. A security clearance specifies the least upper bound of security classes of objects for which access rights may be granted. See also: Dominance.
2.… (Read More →)
1. The angle, with respect to the normal, at which a light ray emerges from a surface.
2. The beam divergence at an emitting surface, such as that of a light-emitting diode (LED), laser, lens, prism, or optical fiber end face.
3. At an end face of an optical fiber, the angle between an input ray and the fiber axis.… (Read More →)
The numerical aperture of an optical system used to couple (launch) power into an optical fiber.
Note 1: LNA may differ from the stated NA of a final focusing element if, for example, that element is underfilled or the focus is other than that for which the element is specified.
Note 2: LNA is one of the parameters that determine… (Read More →)
An optical fiber used in conjunction with a source to excite the modes of another fiber in a particular fashion.
Note: Launching fibers are most often used in test systems to improve the precision of measurements. Synonym injection fiber.
In communications cables--including fiber-optic cables--having the transmission media wrapped helically around a central member, the longitudinal distance along the cable required for one complete helical wrap; i.e., the total cable length divided by the total number of wraps.
Note 1: In many fiber-optic cable designs, the lay length is shorter than in metallic cables of similar diameter, to avoid overstressing… (Read More →)
1. In radio wave propagation, see F region.
2. In telecommunications networks and open systems architecture, a group of related functions that are performed in a given level in a hierarchy of groups of related functions.
Note: In specifying the functions for a given layer, the assumption is made that the specified functions for the layers below are performed, except… (Read More →)
An active element within a layer. [T1.630-1999]
A part of the activity of the layer entities. [T1.627-1993]
The boundary between two adjacent layers in the model. [T1.110-1987]
A capability of the (N) layer and the layers beneath it, which is provided to (N + 1) layer entities, at the boundary between the (N) layer and the (N + 1) layer. [T1.110-1987]
An indivisible component of the layer service made visible to the service user via layer service primitives. [T1.110-1987]
A means for specifying in detail the adjacent layer interactions. [T1.110-1987]
Data transferred between corresponding entities on behalf of the upper layer or layer management entities for which they are providing services. [T1.630-1999]
The protocol reference model defined by layered structures based on and using the terminology of ITU-T Recommendations X.200 and X.21
0. The protocols referred to in this American National Standard conform to the OSI Reference Model for ISDN specified in ITU-T Recommendation I.32
0. [After T1.218-1991] [T1.603-1990] [T1.604-1990]
A system in which components are grouped, i.e., layered, in a hierarchical arrangement, such that lower layers provide functions and services that support the functions and services of higher layers.
Note: Systems of ever-increasing complexity and capability can be built by adding or changing the layers to improve overall system capability while using the components that are still in place.
Abbreviation for line buildout. Synonym building out.
Location Based Services
Link Capacity Adjustment Scheme
Abbreviation for liquid crystal display.
Layered Coding Transport
Abbreviation for limited distance modem.
Law Enforcement
A counter that is incremented by one each time an event occurs and is decremented by a fixed value periodically. [T1.218-1991]
In an optical fiber, a mode having a field that decays monotonically for a finite distance in the transverse direction but becomes oscillatory everywhere beyond that finite distance.
Note: Leaky modes correspond to leaky rays in the terminology of geometric optics. Leaky modes experience attenuation, even if the waveguide is perfect in every respect. Synonym tunneling mode.
In an optical fiber, a ray for which geometric optics would predict total internal reflection at the boundary between the core and the cladding, but which suffers loss by virtue of the curved core boundary.
Note: Leaky rays correspond to leaky (i.e., tunneling) modes in the terminology of mode descriptors. Synonym tunneling ray.
An occasional adjustment of one second, added to, or subtracted from, Coordinated Universal Time (UTC) to bring it into approximate synchronism with UT1, which is the time scale based on the rotation of the Earth.
Note 1: Adjustments, when required, are made with respect to the last second of the last minute of the day (Universal Time) on one of… (Read More →)
Dedicated common-carrier facilities and channel equipment used by a network to furnish exclusive private line service to a specific user or group of users.
1. [The] principle requiring that each subject be granted the most restrictive set of privileges needed for the performance of authorized tasks. Application of this principle limits the damage that can result from accident, error, or unauthorized use of an information system (IS). [INFOSEC-99]
2. The principle of granting only such access rights as are required for subjects to perform… (Read More →)
In a binary code, the bit or bit position that is assigned to, or represents, the smallest quantity or increment that can be represented by the code.
Synonym Fermat's principle.
When a multicast host sends the proper IGMP or MLD message to no longer be part of the multicast distribution tree.
Each subnetwork that contains at least one multicast host is know as a leaf. In the case of IPTV, the Home Network utilizing the IPTV service becomes a leaf of the IPTV multicast distribution tree. When new leaves are added to the tree, a branch is created. Branches that no longer contain a leaf will be pruned from the tree.
Abbreviation for light-emitting diode.
An elliptically or circularly polarized wave, in which the electric field vector, observed in the fixed plane, normal to the direction of propagation, whilst looking in the direction of propagation, rotates with time in a left-hand or anticlockwise direction. [NTIA] [RR]
1. A segment of an end-to-end route or path, such as a path from user to user via several networks and nodes within networks.
Note: Examples of legs are several sequential microwave links between two switching centers and a transoceanic cable between two shore communications facilities, each connected to a node in a national network.
2. A connection from a… (Read More →)
A signaling and media interconnection point between callers in legacy wireline/wireless originating networks and an NG9-1-1 Emergency Services Network. This Functional Element provides MF/SS7-to-SIP signaling interworking, as well as emergency services-specific processing.
A signaling and media interconnection point between callers in legacy wireline/wireless originating networks and an NG9-1-1 Emergency Services Network. This Functional Element provides MF/SS7-to-SIP signaling interworking, as well as emergency services-specific processing.
The LPG is a signaling and media interconnection point between the NG9-1-1 Emergency Services Network and legacy PSAPs. It is responsible for interworking the SIP signaling to the Traditional MF or Enhanced MF (E-MF) signaling supported by the legacy PSAP and is responsible for providing emergency services-specific processing associated with transfer requests to and from legacy PSAPs and for processing… (Read More →)
The LPG is a signaling and media interconnection point between the NG9-1-1 Emergency Services Network and legacy PSAPs. It is responsible for interworking the SIP signaling to the Traditional MF or Enhanced MF (E-MF) signaling supported by the legacy PSAP and is responsible for providing emergency services-specific processing associated with transfer requests to and from legacy PSAPs and for processing… (Read More →)
The LSRG provides an interface between 9-1-1 Selective Routers and NG9-1-1 Emergency Services Networks. It enables calls to be routed and/or transferred between Legacy and NG9-1-1 networks. It is used in some network deployment models for the transition from Legacy 9-1-1 to NG9-1-1.
The LSRG provides an interface between 9-1-1 Selective Routers and NG9-1-1 Emergency Services Networks. It enables calls to be routed and/or transferred between Legacy and NG9-1-1 networks. It is used in some network deployment models for the transition from Legacy 9-1-1 to NG9-1-1.
A six-bit field that defines message length and that is used to differentiate between message signal units, link status signal units, and fill-in signal units. [T1.226-1992]
Abbreviation for low Earth orbit. A term used to describe the orbital altitude range (500 to 2000 km above the surface of the Earth) of certain communications satellites.
Note 1: Generally, LEO satellites are part of constellations of satellites that achieve wide coverage of the Earth's surface with lower power requirements and shorter propagation delays than can be achieved with,… (Read More →)
Label Edge Router
See LERG Routing Guide
(LERG Routing Guide is a trademark of Telcordia Technologies, Inc. , dba iconectiv, LLC. )
The iconectiv® LERG Routing Guide is an output from the BIRRDS database. It is used by Service Providers (SP) and other carriers as a common means to reflect and exchange current and planned Central Office (CO) Code (NPA-NXX) and Thousands-Block (NPA-NXX-X) assignments along with associated routing data. Data is provided for all SPs in the North American Numbering Plan (NANP).… (Read More →)
A written or electronically signed document to obtain authorization and/or verification of a Toll-Free Subscriber's request to change their preferred Service Provider.
1. The absolute or relative voltage, current, or power at a particular point in a circuit or system.
2. A tier or layer of a hierarchical system, e.g., the Link-Level protocol, high-level computer language.
The adjustment of transmission levels of single links and of links in tandem to prevent problems such as overloading of transmission subsystems.
1. [The] extent to which protective measures, techniques, and procedures must be applied to information systems (IS) and networks based on risk, threat, vulnerability, system interconnectivity considerations, and information assurance needs. Levels of protection are:
1. Basic: [The] IS and networks requiring implementation of standard minimum security countermeasures.
2. Medium: [The] IS and networks requiring layering of additional safeguards above… (Read More →)
Abbreviation for low frequency.
1. An assembly of objects, routines, programs, etc. , that may be drawn upon for use in the performance of functions. [T1.667-1999]
2. Synonym forum.
Local Exchange Routing Guide
The phases of development and operation of a system from the initial concept to final disposal [CESG].
Acronym for last-in first-out.
In a strict sense, the region of the electromagnetic spectrum that can be perceived by human vision, i.e., the visible spectrum, which is approximately the wavelength range of
0. 4 m to
0. 7 m.
Note 1: In the laser and optical communications fields, custom and practice have extended usage of the term light to include the much broader portion… (Read More →)
A stylus, usually hand-held, that contains a photodetector or light source, and that allows interaction with a computer through a specially designed monitor screen.
Synonym optical switch.
A semiconductor device that emits incoherent optical radiation when biased in the forward direction.
See optical fiber.
The brightness of an area subjectively judged relative to the brightness of a similarly illuminated area that appears to be white or highly transmitting. [After SMPTE]
In a lightning protection subsystem, the conductor connecting the air terminal or overhead ground wire to the earth electrode subsystem.
All of the components used to protect a facility from the effects of lightning.
Note: The lightning protection subsystem includes air terminals, lightning down- conductors, the earth electrode subsystem, air gaps, arresters, and their interconnections.
A simplified version of the X.500 standard, which version consists of a set of protocols developed for accessing information directories. [After Bahorsky]
A form of short-term communications security applied to the electromagnetic or acoustic transmission of unclassified information that warrants a degree of protection against simple analysis and easy exploitation but that does not warrant protection to the extent needed for security of classified information.
Equipment that provides limited security for unclassified voice communications.
A device in which the voltage or some other characteristic of the output signal is automatically prevented from exceeding a specified value.
A circuit of nonlinear elements that restricts the electrical excursion of a variable in accordance with specified criteria.
Any process by which a specified characteristic (usually amplitude) of the output of a device is prevented from exceeding a predetermined value.
Note 1: Hard limiting ("clipping") is a limiting action in which there is (a) over the permitted dynamic range, negligible variation in the expected characteristic of the output signal, and (b) a steady-state signal, at the maximum permitted… (Read More →)
In radio transmission, the maximum permissible interference as specified in recommendations of the International Special Committee on Radio Interference or other recognized authority.
1. A physical medium for transferring electrical or electromagnetic energy from one point to another for purposes of communications.
2. A land line.
3. A metallic medium used for the transmission of electrical power.
4. A transmission medium, together with the associated equipment, required to provide the means of transporting information between two consecutive network elements, one of which originates… (Read More →)
See four-wire terminating set.
The code generated by a regenerator upon loss of input signal or loss of frame. The line AIS signal will maintain operation of the downstream regenerators and therefore prevent generation of unnecessary alarms. At the same time, data and orderwire communication is retained between the regenerators and the downstream line terminating equipment (LTE). [T1.105-1988]
The degree of electrical similarity of the two conductors of a transmission line.
Note: A high degree of line balance reduces pickup of extraneous disturbances of all kinds, including crosstalk.
Synonym building out.
A code chosen for use within a communications system for transmission purposes.
Note 1: A line code may differ from the code generated at a user terminal, and thus may require translation.
Note 2: A line code may, for example, reflect a requirement of the transmission medium, e.g., optical fiber versus shielded twisted pair.
[The] elimination of unintentional signals or noise induced or conducted on a telecommunications or information system signal, power, control, indicator, or other external interface line. [INFOSEC-99]
Unintentional signals or noise induced or conducted on a telecommunications or information system signal, power, control, indicator, or other external interface line. [INFOSEC-99]
An amplifier used to enhance the transmission reliability of a usually digital intrafacility metallic transmission line, over extended distances, by driving the input to the transmission line with a higher than normal signal level.
Note: An example of a line driver is an amplifier used to extend the range of an RS-232C digital signal beyond 50 feet (~15 m) while… (Read More →)
A network designed to maintain phantom group balance when one side of the group is equipped with a carrier system.
Note: Since it must balance the phantom group for only voice frequencies, the line filter balance configuration is usually simple compared with the filter that it balances.
See hit.
A network-provided service feature that allows selective denial of call origination to certain lines when excessive demands for service are required of a switching center.
See loop.
A signal used to command the far-end receiver to loopback the received line signal. [T1.107-1988] Synonym [loosely] line loopback signal.
See line loopback.
In a telecommunications link or line facility, interference, from any source, that degrades performance.
Note 1: Line noise is usually measured as a signal-to-noise ratio and as a set parameter used by engineers to determine the operating range of the system.
Note 2: In analog lines, noise is usually measured in dbrnc (dB relative to -90 dBm, with C-message weighting).… (Read More →)
The portion of a device that is connected to external, i.e., outside plant, facilities such as trunks, local loops, and channels.
1. In spectroscopy, an optical source that emits one or more spectrally narrow lines as opposed to a continuous spectrum.
2. In the geometric sense, an optical source having an emitting area in the form of a spatially narrow line, e.g., a slit. Synonym slit source.
In optics, an emission or absorption spectrum consisting of one or more narrow spectral lines, as opposed to a continuous spectrum.
See modulation rate.
Network elements that originate and/or terminate line signals. LTEs can originate, access, modify, or terminate the transport overhead, or can perform any combination of these actions. [T1.105-1988]
In a DDN switching center, the processor that controls traffic on a line.
The customer side of any digital subscriber line (DSL) that does not terminate on the customer installation (CI). [T1.216-1998]
See busy verification.
Of an electromagnetic wave, propagation in which the direct ray from the transmitter to the receiver is unobstructed, i.e., the transmission path is not established by or dependent upon reflection or diffraction.
Note: The need for LOS propagation is most critical at VHF and higher frequencies.
A translation of standardized, existing video systems (using 525, 625, and 1125 total lines per frame) to proposed systems.
Note: Current systems operate in a 2:1 interlace mode, i.e., with
26
2. 5,
31
2. 5,
56
2. 5 lines per field and with concurrent temporal differences at field rates of
5
0. 00,
5
9. 94, or
6
0.… (Read More →)
A map or overlay for signal communications operations that shows the actual routes and types of construction of wire circuits in the field. It also gives the locations of switchboards and telegraph stations. [JP1]
In facsimile, the correlation of object information from scanning line to scanning line.
Note: Line-to-line correlation is used in two-dimensional encoding.
Synonym linear analog synchronization.
Synchronization in which the functional relationships used to obtain synchronization are of simple proportionality. Synonym linear analog control.
A diversity combiner in which the combining consists of simple addition of two or more signals.
A device for which the output is, within a given dynamic range, linearly proportional to the input.
In video technology and image processing, a process for the selective overlay of one video image upon another, as through chroma key.
Note: Control of the ratio of foreground to background determined by the specifications derived from luminance information, and provided in the linear key data. Ratios to be applied are carried for each picture element in the alpha channel.… (Read More →)
See network topology.
Synonym linear programming.
Of an electromagnetic wave, confinement of the E-field vector or H-field vector to a given plane.
Note: Historically, the orientation of a polarized electromagnetic wave has been defined in the optical regime by the orientation of the electric vector, and in the radio regime, by the orientation of the magnetic vector. Synonym plane polarization.
A method of digitally encoding analog signals, which method uses a single-level or multilevel sampling system in which the value of the signal at each sample time is predicted to be a linear function of the past values of the quantized signal.
Note: LPC is related to adaptive predictive coding (APC) in that both use adaptive predictors. However, LPC uses… (Read More →)
In operations research, a procedure for locating the maximum or minimum of a linear function of variables that are subject to linear constraints. Synonym linear optimization.
See network topology.
The property of a system in which, if input signals X and Y result in system output S(X) and S(Y) respectively, the input signal aX + bY will result in the output aS(X) + bS(Y), where S is the system transfer function and a and b are scalars.
A mode for which the field components in the direction of propagation are small compared to components perpendicular to that direction.
Note: The LP description is an approximation that is valid for a weakly guiding optical fiber, including typical telecommunications grade fibers.
See spectral width.
1. The communications facilities between adjacent nodes of a network. Synonym [loosely] telecommunications link.
2. A portion of a circuit connected in tandem with, i.e., in series with, other portions.
3. A radio path between two points, called a radio link.
4. In communications, a general term used to indicate the existence of communications facilities between two points. [JP 1-02]… (Read More →)
The process of provisioning signaling links with physically separate transmission routes between signaling points to mitigate impact of facility failures. [T1.226-1992]
1. The application of on-line crypto-operation to a link of a communications system so that all information passing over the link is encrypted in its entirety. [JP1-02]
2. Encryption of information between nodes of a communications system. [INFOSEC-99]
Deprecated term for Data Link Layer. See Open Systems Interconnection--Reference Model.
In the hierarchical structure of a primary or secondary station, the conceptual level of control or data processing logic that controls the data link.
Note: Link-level functions provide an interface between the station high-level logic and the data link. Link-level functions include (a) transmit bit injection and receive bit extraction, (b) address and control field interpretation, (c) command response generation,… (Read More →)
A voice or data communications circuit that (a) serves as a transmission link between adjacent communications facilities that are interconnected by a transmission link and (b) is used only for coordination and control of link activities, such as traffic monitoring and traffic control.
A set of rules relating to data communications over a data link.
Note: Link protocols define data link parameters, such as transmission code, transmission mode, control procedures, and recovery procedures.
In adaptive high-frequency (HF) radio, the overall process by which measurements of signal quality are made, assessed, and analyzed.
Note 1: In LQA, signal quality is determined by measuring, assessing, and analyzing link parameters, such as bit error ratio (BER), and the levels of the ratio of signal-plus-noise-plus-distortion to noise-plus-distortion (SINAD). Measurements are stored at--and exchanged between--stations, for use in… (Read More →)
A set of signaling links directly connecting two signaling points. [T1.226-1992]
The control that coordinates functions of the signaling link, including signal unit delimitation, signal unit alignment, error detection, error correction, initial alignment, signaling link error monitoring, and flow control. [T1.110-1987]
A signal unit that contains status information about the signaling link in which it is transmitted. [T1.110-1987]
The individual application of encipherment to data on each link of a communications system [7498-2].
Note: The implication of link-by-link encipherment is that the data will be in cleartext form in relay entities. See also: End-To-End Encipherment.
In computer security, the purposeful combining of data or information from one data processing system with data or information from another system to derive protected information. [After 2382-pt.8] Synonym fusion.
A type of AllCall registration feature, the use of which combines the registrations for incoming and outgoing calls for the current terminal address in a single procedure. However, unlike AllCall registration, a linked registration cannot be overridden in all or in part by: (a) InCall, remote InCall, AllCall, or remote AllCall registrations by the same UPT (Universal Personal Telecommunications service)… (Read More →)
In adaptive high-frequency (HF) radio, protection intended to prevent the establishment of unauthorized links or the unauthorized manipulation of legitimate links, and which are administered through an authorization process. [After FED-STD-1049/1]
A freeware version of the UnixTM operating system.
The synchronization of audio and corresponding video signals so that there is no noticeable lack of simultaneity between them.
Note: An example of a lip synchronization problem is the case in which television video and audio signals are transported via different facilities (e.g., a geosynchronous satellite link and a landline) that have significantly differently delay times, respectively. In such cases… (Read More →)
A display device that creates characters by means of the action of electrical signals on a matrix of liquid cells that become opaque when energized.
Note: A liquid crystal display may be designed to be viewed by reflected or transmitted light.
In e-mail, an address used by mailing list subscribers to send e-mail to be distributed to each member of a discussion list, forum, interest group, mailing list, or newsgroup. [After Bahorsky]
Software used to manage and administer a discussion-group list, an interest group list, or a mailing list. [After Bahorsky]
A functional unit (hardware and software) for operating a computer conferencing system by acting as a repository for electronic messages and redistributing those messages automatically or on-demand. Synonyms distribution list server, mailing list server.
A link, on a World Wide Web file, that connects to another layer of information. [After Bahorsky]
See scripting language.
Logical Link Control. See logical link control sublayer.
Link Management Agent
Local Management Interface
Abbreviation for launch numerical aperture.
Local Number Portability
The process of moving a TN from one SP to another SP using LRN-LNP technology. See also Intra-Service Provider Port definition
1. The power consumed by a device or circuit in performing its function.
2. A power-consuming device connected to a circuit.
3. To enter data or programs into storage or working registers.
4. To insert data values into a database that previously contained no occurrences of data.
5. To place a magnetic tape reel on a tape drive, or to… (Read More →)
In pulse-code modulation (PCM), the level of a sinusoidal signal that has positive and negative peaks that coincide with the positive and negative virtual decision values of the encoder.
Note: Load capacity is usually expressed in dBm
0. Synonym overload point.
The ratio of the average load over a designated period of time to the peak load occurring during that period.
A process used to route signaling traffic over two or more signaling routes for purposes of traffic equalization or security. [T1.226-1992]
A routine that reads data into main storage.
1. The insertion of impedance into a circuit to change the characteristics of the circuit.
2. In multichannel communications systems, the insertion of white noise or equivalent dummy traffic at a specified level to simulate system traffic and thus enable analysis of system performance.
3. In telephone systems, the load, i.e., power level, imposed by the busy hour traffic.
Note… (Read More →)
In multichannel telephone systems, a plot, for the busy hour, of the equivalent mean power and the peak power as a function of the number of voice channels.
Note: The equivalent power of a multichannel signal referred to the zero transmission level point is a function of the number of channels and has for its basis a specified voice channel… (Read More →)
A coil that does not provide coupling to any other circuit, but is inserted in a circuit to increase its inductance.
Note 1: Loading coils inserted periodically in a pair of wires reduce the attenuation at the higher voice frequencies up to the cutoff frequency of the low-pass filter formed by (a) the inductance of the coils and distributed inductance… (Read More →)
1. An identifiable segment of an antenna radiation pattern.
Note: A lobe is characterized by a localized maximum bounded by identifiable nulls.
2. A pair of channels between a data station and a lobe attaching unit, one channel for sending and one for receiving, as seen from the point of view of the attached data station.
In a ring network, a functional unit used to connect and disconnect data stations to and from the ring without disrupting network operations.
Under the terms of the Modification of Final Judgment (MFJ), a geographical area within which a divested Bell Operating Company (BOC) is permitted to offer exchange telecommunications and exchange access services.
Note: Under the terms of the MFJ, the BOCs are generally prohibited from providing services that originate in one LATA and terminate in another.
Also referred to as service… (Read More →)
The process of modifying a product that has hard-coded biases of one culture to the hard-coded biases of another culture [POSIX.0].
A data communications system that (a) lies within a limited spatial area, (b) has a specific user group, (c) has a specific topology, and (d) is not a public switched telecommunications network, but may be connected to one.
Note 1: LANs are usually restricted to relatively small areas, such as rooms, buildings, ships, and aircraft.
Note 2: An interconnection of… (Read More →)
1. In telegraphy, the source of power that actuates the telegraphic station recording instruments, as distinguished from the source of power that furnishes current to the line.
2. In telephony, a system in which each telephone instrument has its own source of power, as opposed to being powered from the central office.
3. A source of local power for a… (Read More →)
1. Any call using a single switching facility.
2. Any call for which an additional charge, i.e., toll charge, is not made to the calling or called party.
Note: Calls such as those via "800" numbers do not qualify as local calls, because the called party is charged.
Synonym central office.
The portion of a private line circuit which is included in the exchange transmission plant. However, common usage of this term usually excludes information origination/termination equipment. [47 CFR Pt.36-A]
A source of timing located in close proximity to an associated facility, such as a communications station, central office, or node.
Note: The same clock might be a remote clock relative to some other facility.
A communication network within a TMN (telecommunications management network) that supports data communication functions (DCFs) normally at [specified] reference points q1 and q
2. LCNs range from the simple to the complex. LCN examples include point-to-point connections and networks based on star and bus topologies. [After T1.210-1993]
Synonym central office.
A local telephone company, i.e., a communications common carrier that provides ordinary local voice-grade telecommunications service under regulation within a specified service area.
An interconnection between customer premises equipment and telephone central office.
See loop.
Synonym loop.
See measured-rate service.
A node which interfaces directly with customer equipment. [T1.101-1999]
1. Synonym central office.
2. A central office serving primarily as a place of termination for subscriber lines and for providing telephone service to the subscribers on these lines. [47 CFR Pt.36-A]
A communications circuit between a technical control facility and selected terminal or repeater locations within the communications complex.
Note: In multichannel radio systems, the local orderwire is usually a handset connection at the radio location.
A local number, unambiguously identifying an SCCP (signaling connection control part) connection within one SCCP entity. [T1.110-1987]
That part of the security domain of a system which is under the control of the System Manager [CESG]. See also: Electronic Security Environment, Global Security Environment.
The portion of a device that is connected to internal facilities, such as switches, patch panels, test bays and supervisory equipment.
A description of a cultural environment [POSIX.0].
The process of utilizing the internationalization features to create a version of a product for a specific culture [POSIX.0].
Location by Reference refers to the mechanism to deliver a location reference URI in a message header of the call request (SIP INVITE) that is used to obtain location information (e.g., by the PSAP).
Location by Reference refers to the mechanism to deliver a location reference URI in a message header of the call request (SIP INVITE) that is used to obtain location information (e.g., by the PSAP).
Location by Value refers to the mechanism to deliver the callers location to the PSAP within the message body of the call request (SIP INVITE).
Location by Value refers to the mechanism to deliver the callers location to the PSAP within the message body of the call request (SIP INVITE).
See CLLI Code.
(CLLI is a trademark of iconectiv, LLC. )
The LRF provides routing instructions and if needed location information to the E-CSCF. The LRF obtains routing information via the RDF and can obtain location information from the LS.
The LRF provides routing instructions and if needed location information to the E-CSCF. The LRF obtains routing information via the RDF and can obtain location information from the LS.
The ten-digit (NPA-NXX-XXXX) number assigned to a switch/POI used for routing in a permanent local number portability environment. See âAdministrative Numbersâ definition.
In ATIS Standards the LS resides within the Originating Service Provider network to provide location.
In ATIS Standards the LS resides within the Originating Service Provider network to provide location.
The LoST protocol maps location information and a Service URN to a URI.
The LoST protocol maps location information and a Service URN to a URI.
[A] protection system that involves matching a key or password with a specific access requirement. [INFOSEC-99]
A frequency at which a closed-loop system can acquire and track a signal. See lock-in range.
1. The range of frequencies within which a closed-loop system can acquire and track a signal.
2. The dynamic range within which a closed-loop system can acquire and track a signal.
Synonym clock normal mode.
1. In telephone systems, treatment of a user's line or trunk that is in trouble, or in a permanent off-hook condition, by automatically disconnecting the line from the switching equipment.
2. In public telephone systems, a process that denies an attendant or other users the ability to reenter an established connection.
3. In a telephone circuit controlled by two voice-operated… (Read More →)
Synonym journal.
To perform a login procedure. Synonym log on.
To perform a log-off procedure. Synonym log out.
Synonym log in.
Synonym log off.
The procedure that is followed by a user in closing a session, e.g., a period of terminal operation. Synonym log out.
A broadband, multi-element, unidirectional, narrow-beam antenna that has impedance and radiation characteristics that are regularly repetitive as a logarithmic function of the excitation frequency.
Note: The length and spacing of the elements of a log-periodic antenna increase logarithmically from one end to the other. Synonym log-periodic array.
Synonym log-periodic antenna.
1. Malicious logic that causes damage to a data processing system when triggered by some specific system condition. [2382-pt.8]
2. [A] resident computer program triggering an unauthorized act when particular states of an information system (IS) are realized. [INFOSEC-99]
Synonym virtual circuit.
In a local-area-network/metropolitan-area-network (LAN/MAN) system, the part of the link level that (a) supports medium-independent data link functions and (b) uses the services of the medium access control sublayer to provide services to the network layer.
Synonym virtual circuit.
A logical channel that provides a signaling path within an information channel or within a physical signaling channel.
Of a network, the schematic configuration that reflects the network's function, use, or implementation without regard to the physical interconnection of network elements.
The procedure that is followed by a user in beginning a session, e.g., a period of terminal operation. Synonym logon.
Synonym login.
A transmission line in a long-distance communications network.
Note: Examples of long lines are TDM and FDM carrier systems, microwave radio links, geosynchronous satellite links, underground cables, aerial cables and open wire, and submarine cables.
A silent interval during a ringing cycle or pattern that lasts at least 1200 ms. [T1.401-1998]
In fiber optic communications, pertaining to optical wavelengths greater than 1 m.
Any telephone call to a destination outside the local service area of the calling station, whether inter-LATA or intra-LATA, and for which there is a charge beyond that for basic service. Synonym toll call.
1. In public switched networks, pertaining to circuits that span large distances, such as the circuits in inter-LATA, interstate, and international communications.
2. In the military community, communications among users on a national or worldwide basis.
Note 1: Compared to tactical communications, long-haul communications are characterized by (a) higher levels of users, such as the National Command Authority, (b) more… (Read More →)
See loran.
See loran.
Bit error rate measured over a sufficiently long period, for example, one month. [T1.226-1992]
Of an oscillator, the degree of uniformity of frequency over time, when the frequency is measured under identical environmental conditions, such as supply voltage, load, and temperature.
Note: Long-term frequency changes are caused by changes in the oscillator elements that determine frequency, such as crystal drift, inductance changes, and capacitance changes.
1. The electrical symmetry, with respect to ground, of the two wires of a pair
2. An expression of the difference in impedance of the two sides of a circuit.
The ratio of the disturbing longitudinal source voltage, Vs, and the resultant metallic voltage, Vm, at the same frequency of the network under test, expressed in dB. The degree of balance between each conductor of a wire pair or equipment unit and ground is a measure of immunity to noise induced from external sources. [After T
1. Rpt16-1992]
Synonym gap loss.
A system of error control based on the formation of a block check following preset rules.
Note 1: The block check formation rules are applied in the same manner to each character.
Note 2: A combination of longitudinal and vertical redundancy check allows the detection and correction of single bit errors. Synonym horizontal redundancy check.
A voltage induced or appearing along the length of a transmission medium.
Note 1: Longitudinal voltage may be effectively eliminated by using differential amplifiers or receivers that respond only to voltage differences, e.g., those between the wires that constitute a pair.
Note 2: Induced longitudinal voltages at low (power-line) frequencies can be greatly reduced by twisting parallel wires to create… (Read More →)
Information concerning network resources available to support higher precedence calls.
Note 1: Available resources include idle circuits and circuits used for lower precedence calls.
Note 2: LFB information may be used to make call-path reservations.
1. A communications channel from a switching center or an individual message distribution point to the user terminal. Synonym subscriber line.
2. A pair of wires, or its equivalent, between a customer's station and the central office from which the station is served. [47 CFR Pt.36-A] Synonyms local loop, user line.
3. Go-and-return conductors of an electric circuit; a closed… (Read More →)
Synonym echo check.
A condition in which the network presents a low-resistance tip-to-ring dc path at the network interface (NI). [T1.407-1990]
The loss that could be provided by a digital loop carrier system or a fiber-in-the-loop system when a short customer analog access cable results in below-average attenuation. [T1.508-1998]
In a phase-locked loop, a filter located between the phase detector (or time discriminator) and the voltage controlled oscillator (or phase shifter).
1. The total usable power gain of a carrier terminal or two-wire repeater.
Note: The maximum usable gain is determined by, and may not exceed, the losses in the closed path.
2. The sum of the gains, expressed in dB, acting on a signal passing around a closed path, i.e., a loop.
The noise contributed by one or both loops of a telephone circuit to the total circuit noise.
Note: In a given case, it should be stated whether the loop noise is for one or both loops.
A signal in which the network applies a high resistance between the tip and ring conductors at the network interface (NI). [T1.407-1997]
A supervisory signal given by a telephone or PBX in response to completing the loop path.
A test that uses a closed circuit, i.e., loop, to detect and locate faults.
Multipoint transmission in which (a) all the stations in a network are serially connected in one closed loop, (b) there are no cross-connections, (c) the stations serve as regenerative repeaters, forwarding messages around the loop until they arrive at their destination stations, and (d) any station can introduce a message into the loop by interleaving it with other messages. [From… (Read More →)
1. A method of performing transmission tests of access lines from the serving switching center, which method usually does not require the assistance of personnel at the served terminal.
2. A method of testing between stations (not necessarily adjacent) wherein two lines are used, with the testing being done at one station and the two lines interconnected at the distant… (Read More →)
A distributed-queue dual-bus (DQDB) scheme in which the head-of-bus functions for both buses are at the same location.
In computer security, synonym flaw.
See buffer.
Acronym for long-range radio navigation. A long-range radio navigation position-fixing system consisting of an array of fixed stations that transmit precisely synchronized signals to mobile receivers.
Note: A loran receiver measures differences in the times of arrival of the signals from the various stations. A fixed difference in the time of arrival of the signals from any two stations will… (Read More →)
A long distance radionavigation land station transmitting synchronized pulses. Hyperbolic lines of position are determined by the measurement of the difference in the time of arrival of these pulses. [NTIA]
Abbreviation for line of sight. See line-of-sight propagation.
1. The diminution, usually expressed in dB, of signal level in a communications medium.
2. The power, usually expressed in watts, consumed or dissipated by a circuit or component without accomplishing useful work or purpose; e.g., heating (hysteresis loss) that occurs in the core of a transformer.
3. In computer security, a quantitative measure of harm or deprivation resulting from… (Read More →)
The term "Loss Deviation" denotes the variation of the actual loss from the designed value.
1. In the storage of digital data, reduction, by the use of one or more appropriate algorithms, of the amount of data to be stored, in such a manner that the original data may be recovered precisely; i.e., in the exact original form.
Note: The actual algorithm(s) applied to a given set of data may depend on the application (and… (Read More →)
1. In video and multimedia, bit-rate reduction of an image signal by powerful algorithms that compress beyond what is achievable in lossless compression or in quasi-lossless compression.
Note: Lossy compression accepts loss of information and introduction of artifacts that can be ignored as unimportant when viewed in direct comparison with the original. Lossy compression takes advantage of the subtended viewing… (Read More →)
A medium in which a significant amount of the energy of a propagating electromagnetic wave is absorbed per unit distance traveled by the wave. [After 2196]
A block not delivered to the user within a specified maximum end-to-end block transfer time.
A call that has not been completed for any reason other than cases where the call receiver (termination) is busy.
A frame that is not delivered to the destination user within an agreed-upon measurement period, and the network is responsible. The procedure used to reach agreement on the measurement period should allow for the possibility that more than one network may be involved in the connection. [After T1.615-1992]
See LEO.
Any frequency in the band from 30 kHz to 300 kHz. See electromagnetic spectrum.
Synonym low-level signaling.
Synonym computer-oriented language.
Modulation of a signal, e.g., a carrier, at a point in a system or device, such as a radio transmitter, where the power level is low compared to the final output power.
The use on signal lines of voltage levels that are between the limits of positive and negative 6 volts. Synonym low-level keying.
A filter network that passes all frequencies below a specified frequency with little or no loss, but strongly attenuates higher frequencies.
1. Equipment that has imprecise characteristics that do not meet system reliability requirements.
2. In military communications, equipment that has insufficiently exacting characteristics to permit its use in trunks or links.
Note: Low-performance equipment may be used in loops if it meets loop performance requirements.
3. Tactical ground and airborne equipment that (a) has size, weight, and complexity characteristics that… (Read More →)
A restricted radiation device, exclusive of those employing conducted or guided radio frequency techniques, used for the transmission of signs, signals (including control signals), writing, images and sounds or intelligence of any nature by radiation of electromagnetic energy. Examples: Wireless microphone, phonograph oscillator, radio-controlled garage door opener, and radio-controlled models. [NTIA]
A broadcast service that permits the licensing of 50- to 100-watt FM radio stations within a service radius of up to
3. 5 miles and 1- to 10-watt FM radio stations within a service radius of 1 to 2 miles. [After FCC]
A broadcast service that permits program broadcasting via television translators operating with low power. LPTV service includes the existing translator service and operates on a secondary basis to regular television stations. Transmitter output is limited to 1,000 watts for normal VHF stations and 100 watts when a VHF operation is on an allocated channel. [After FCC]
Deprecated term. See facility grounding system.
The lowest frequency in the HF band at which the received field intensity is sufficient to provide the required signal-to-noise ratio for a specified time period, e.g., 0100 to 0200 UTC, on 90% of the undisturbed days of the month.
Abbreviation for linear programming, linking protection.
Abbreviation for linearly polarized mode.
Designation of the fundamental LP mode. See fundamental mode.
Abbreviation for linear predictive coding.
LTE Positioning Protocol
Abbreviation for link quality analysis.
Abbreviation for longitudinal redundancy check.
Abbreviation for least significant bit, lower sideband.
Local Service Ordering Guidelines
Local Service Provider
Local Service Request
Abbreviation for line traffic coordinator.
1. Line Terminating Equipment,
2. Long Term Evolution.
LTE Advanced
Acronym for lowest usable high frequency.
1. In CRT displays, the difference in brightness between the lightest and the darkest element of a scene or its display. [After SMPTE]
2. Of a CRT or other display device, the ratio of (a) the maximum brightness that is (or can be) displayed to (b) the minimum brightness that is (or can be) displayed.
1. In television technology, the signal that describes (a) the distribution of brightness levels within the image and (b) the equation for deriving that information from the camera output. [After SMPTE]
2. In composite color television, a signal that has major control of the brightness.
Note: Luminance signal is a linear combination of gamma-corrected primary color signals. [After IEEE 100]… (Read More →)
See superluminescent LED.
The rate of flow of radiant energy.
Note: Luminous flux is expressed in lumens (cd sr).
See candela.
In the Internet, a participant in a chat room or a subscriber to a mailing list or newsgroup who passively observes but does not actively participate in the exchange. [Bahorsky]
Passive participation in (i.e., monitoring) the activities of a mailing list, a newsgroup, an IRC channel, a video connection, or any other Internet communication device.
Note: Lurking is generally carried out for the purpose of nondirected information gathering or to allow a new user to first understand the focus and the manners of a discussion group. [Bahorsky]
A World Wide Web browser that provides a character-based user interface to hypertext-based information.
Note: Lynx can display only character-based portions of the hypertext-based information.
Showing 1–331 of 331 results