Glossary:

ATIS Telecom Glossary

Search Keyword By: L

Select a term name to open its entry and any media references. Longer definitions end with a “Read More” link.

long-term bit error rate

Bit error rate measured over a sufficiently long period, for example, one month. [T1.226-1992]

long-term stability

Of an oscillator, the degree of uniformity of frequency over time, when the frequency is measured under identical environmental conditions, such as supply voltage, load, and temperature.
Note: Long-term frequency changes are caused by changes in the oscillator elements that determine frequency, such as crystal drift, inductance changes, and capacitance changes.

longitudinal balance

1. The electrical symmetry, with respect to ground, of the two wires of a pair
2. An expression of the difference in impedance of the two sides of a circuit.

longitudinal balance�audio

The ratio of the disturbing longitudinal source voltage, Vs, and the resultant metallic voltage, Vm, at the same frequency of the network under test, expressed in dB. The degree of balance between each conductor of a wire pair or equipment unit and ground is a measure of immunity to noise induced from external sources. [After T
1. Rpt16-1992]

longitudinal redundancy check (LRC)

A system of error control based on the formation of a block check following preset rules.
Note 1: The block check formation rules are applied in the same manner to each character.
Note 2: A combination of longitudinal and vertical redundancy check allows the detection and correction of single bit errors. Synonym horizontal redundancy check.

longitudinal voltage

A voltage induced or appearing along the length of a transmission medium.
Note 1: Longitudinal voltage may be effectively eliminated by using differential amplifiers or receivers that respond only to voltage differences, e.g., those between the wires that constitute a pair.
Note 2: Induced longitudinal voltages at low (power-line) frequencies can be greatly reduced by twisting parallel wires to create… (Read More →)

look-ahead-for-busy (LFB) information

Information concerning network resources available to support higher precedence calls.
Note 1: Available resources include idle circuits and circuits used for lower precedence calls.
Note 2: LFB information may be used to make call-path reservations.

loop

1. A communications channel from a switching center or an individual message distribution point to the user terminal. Synonym subscriber line.
2. A pair of wires, or its equivalent, between a customer's station and the central office from which the station is served. [47 CFR Pt.36-A] Synonyms local loop, user line.
3. Go-and-return conductors of an electric circuit; a closed… (Read More →)

Showing 261–270 of 331 results