Glossary:

ATIS Telecom Glossary

Search Keyword By: D

Select a term name to open its entry and any media references. Longer definitions end with a “Read More” link.

D channel

In ISDN, the 16-kb/s segment of a 144-kb/s, full-duplex subscriber service channel that is subdivided into 2B+D channels, i.e., into two 64-kb/s clear channels and one 16-kb/s channel for the ISDN basic rate.
Note 1: The D channel is usually used for out-of-band signaling. The two 64-kb/s clear channels are used for subscriber voice and data services.
Note 2: The… (Read More →)

D region

That portion of the ionosphere existing approximately 50 to 95 km above the surface of the Earth.
Note: Attenuation of radio waves, caused by ionospheric free-electron density generated by solar radiation, is pronounced during daylight hours. Because solar radiation is not present at night, ionization ceases, and hence attenuation of radio waves ceases.

D-4

A framing standard for traditional time-division multiplexing, which standard describes user channels multiplexed onto a trunk that has been segmented (framed) into 24 bytes of 8 bits each.
Note: The multiplexing function is performed in the D-4 framing structure by interleaving bits of consecutive bytes as they are presented from individual circuits into each D-4 frame.

D-type patch bay

A patch bay designed for patching and monitoring of unbalanced data circuits at rates up to 1 Mb/s.

D2

See channel bank.

daemon

Abbreviation for disk and execution monitor. A procedure that is invoked without being called explicitly whenever an alteration, an addition, or a deletion or other event occurs. [ANSDIT] Pronounced dee' mun. Also spelled demon.

DAI

Digital Ad Insertion

damping

1. The progressive diminution with time of certain quantities characteristic of a phenomenon.
2. The progressive decay with time in the amplitude of the free oscillations in a circuit.
3. Energy dissipation mechanisms that reduce the amplification and broaden the vibratory response in the region of a resonance. [T1.329-1995]

damping ratio

In studies of network survivability in an earthquake, the ratio of actual damping to critical damping. [After T1.329-1995]

dangling threat

Set of properties about the external environment for which there is no corresponding vulnerability and therefore no implied risk. [INFOSEC-99]

dangling vulnerability

[A] set of properties about the internal environment for which there is no corresponding threat and, therefore, no implied risk. [INFOSEC-99]

dark current

The external current that, under specified biasing conditions, flows in a photoconductive detector when there is no incident radiation.

DAT

Abbreviation for digital audio tape. A consumer audio-recording and playback medium/format that maintains a signal quality equal to that of the CD-ROM medium/format.

data

A representation of facts, concepts, or instructions that are collected, organized, recorded, processed, and stored in a retrievable form suitable for communication, interpretation, or processing by human or automated means. [This definition refers to a group of facts taken as a unit; thus it is used with a singular verb. ]

data access arrangement

1. In public switched telephone networks, a single item or group of items at the customer side of the network interface for data transmission purposes, including all equipment that may affect the characteristics of the interface.
2. A data circuit-terminating equipment (DCE) supplied or approved by a common carrier that permits a DCE or data terminal equipment (DTE) to be… (Read More →)

data aggregation

[In security,] the compilation of unclassified individual data systems and data elements resulting in the totality of the information being classified. [INFOSEC-99]

data attribute

A characteristic of a data element such as length, value, or method of representation.

data authentication

A process used to verify data integrity, e.g., verification that data received are identical to data sent, or verification that a program is not infected by a virus. [After 2382-pt.8]

data bank

1. A set of data related to a given subject and organized in such a way that it can be consulted by users.
2. A data repository accessible by local and remote users.
Note: A data bank may contain information on single or multiple subjects, may be organized in any rational manner, may contain more than one database, and may… (Read More →)

data base node (DBN)

A signaling point that acts as a repository of information and provides query/response services for processing and routing of certain types of network calls (for example, 800 Data Base Service Calls). [T1.226-1992]

data bus

A bus used to transfer data within or to and from a processing unit or storage device.

data channel

A means for delivering data from one point to another. The data channel may be comprised of the following components: format conversion devices, encoders (compressors) and decoders (decompressors), buffers, stream segmentation and reassembly devices, multiplexors and demultiplexors, modulators and demodulators, transmission facilities, switches, multipoint conference units, and other components necessary to achieve the desired channel characteristics. A sequence of data… (Read More →)

data circuit connection

The interconnection of any combination of links and trunks, on a tandem basis, by means of switching equipment to facilitate information interchange.

data collection processor

A communications device, serving as mediation equipment in the telecommunication management network, that provides concentration, protocol conversion, and operations functions such as accumulation and thresholding. One or more NEs (network elements) may be connected to each physical port. [T1.210-1993]

data communication

The transfer of information between functional units by means of data transmission according to a protocol.
Note: Data are transferred from one or more sources to one or more sinks over one or more data links.

data communication network (DCN)

A configuration of telecommunication facilities for the purpose of transmitting data, as opposed to analog signals. [After T1.210-1989]

data compaction

The reduction of the number of data elements, bandwidth, cost, and time for the generation, transmission, and storage of data without loss of information by eliminating unnecessary redundancy, removing irrelevancy, or using special coding.
Note 1: Examples of data compaction methods are the use of fixed-tolerance bands, variable-tolerance bands, slope-keypoints, sample changes, curve patterns, curve fitting, variable-precision coding, frequency analysis,… (Read More →)

data composite

A collection of data elements treated as a unit. [T1.238-1994/97] [T1.266-2000]

data compression

1. Increasing the amount of data that can be stored in a given domain, such as space, time, or frequency, or contained in a given message length.
2. Reducing the amount of storage space required to store a given amount of data, or reducing the length of message required to transfer a given amount of information.
Note 1: Data compression… (Read More →)

data concentrator

A functional unit that permits a common transmission medium to serve more data sources than there are channels currently available within the transmission medium.

data conferencing repeater

A device that enables any one user of a group of users to transmit a message to all other users in that group. Synonym technical control hubbing repeater.

data corruption

An accidental or intentional violation of data integrity. [2382-pt.8]

data country code

A 3-digit numerical country identifier that is part of the 14-digit network terminal numbering plan.
Note: The data country code prescribed numerical designation further constitutes a segment of the overall 14-digit X.121 numbering plan for an ITU-T X.25 network.

data definition

The process of creating a complete description of the structure of a database by identifying and describing data elements and their relationships that make up the database structure. [After ANSDIT]

data dictionary

1. A part of a database management system that provides a centralized repository of information about data in a database, such as meaning, relationship to other data.
2. An inventory that describes, defines, and lists all of the data elements that are stored in a database.

data directory

An inventory that specifies the source, location, ownership, usage, and destination of all of the data elements that are stored in a database.

data element

A single unit of data that in a certain context is considered indivisible. It cannot be decomposed into more fundamental segments of data that have useful meanings with the business.

Data Encryption Standard (DES)

[A] cryptographic algorithm for the protection of unclassified computer data and published by the National Institute of Standards and Technology in Federal Information Processing Standard Publication 46-1. [INFOSEC-99]
Note: DES is not approved for protection of national security classified information.

data forwarder

A device that (a) receives data from one data link and retransmits data representing the same information, using proper format and link protocols, to another data link and (b) may forward data between (a) links that are identical, i.e., TADIL B to TADIL B, (b) links that are similar, i.e., TADIL A to TADIL B, or (c) links that are… (Read More →)

data frame

A presentation unit of the data channel; a defined group of consecutive data bits. The preferred number of bits in a data frame depends on the application for the data channel. [T1.80
1. 04-1997]

data integrity

1. [The] condition existing when data is unchanged from its source and has not been accidentally or maliciously modified, altered, or destroyed. [INFOSEC-99]
2. The condition in which data are identically maintained during any operation, such as transfer, storage, and retrieval.
3. The preservation of data for their intended use.
4. Relative to specified operations, the a priori expectation of… (Read More →)

data item

1. A named component of a data element; usually the smallest component.
2. A subunit of descriptive information or value classified under a data element. For example the data element "military personnel grade" contains data items such as sergeant, captain, and colonel. [JP 1-02]

data key

A cryptographic key used for authentication or for encryption and decryption. [After X9.17]

data link

1. The means of connecting one location to another for the purpose of transmitting and receiving data. [JP 1-02]
2. An assembly, consisting of parts of two data terminal equipments (DTEs) and the interconnecting data circuit, that is controlled by a link protocol enabling data to be transferred from a data source to a data sink.

data link connection identifier (DLCI)

In frame-relay transmission systems, 13-bit field that defines the destination address of a packet. The address is local on a link-by-link basis. [After T1.312-1991]

data link escape character (DLE)

A transmission control character that changes the meaning of a limited number of contiguously following characters or coded representations.

data logging

The dating, time-labeling, and recording of data.

data management

The control of data handling operations--such as acquisition, analysis, translation, coding, storage, retrieval, and distribution of data--but not necessarily the generation and use of data. [From Weik '89]

data medium

The material in or on which one or more characteristics of the material may be used to represent information statically or dynamically.
Note: Examples of data media are films, compact optical disks, cards, magnetic disks, magnetic drums, and paper.

data mining

The process of analyzing data to determine data relationships undiscovered by previous analyses.

data mode

In a communications network, the state of data circuit-terminating equipment (DCE) when connected to a communications channel and ready to transmit data, usually digital data.
Note: When in the data mode, the DCE is not in a talk or dial mode.

data network identification code (DNIC)

In the ITU-T International X.121 format, the first four digits of the international data number, the three digits that may represent the data country code, and the 1-digit network code, i.e., the network digit.

data numbering plan area (DNPA)

In the U. S. implementation of a ITU-T X.25 network, the first three digits of a network terminal number (NTN).
Note: The 10-digit NTN is the specific addressing information for an end-point terminal in an X.25 network.

data phase

The phase of a data call during which data may be transferred between data terminal equipments (DTEs) that are interconnected via the network.
Note: The data phase of a data call corresponds to the information transfer phase of an information transfer transaction.

data processing

The systematic performance of operations upon data such as handling, merging, sorting, and computing.
Note: The semantic content of the original data should not be changed. The semantic content of the processed data may be changed. Synonyminformation processing.

data processing equipment

Office equipment such as that using punched cards, punched tape, magnetic or other comparable storage media as an operating vehicle for recording and processing information. Includes machines for transcribing raw data into punched cards, etc. , but does not include such items as key-operated, manually or electrically driven adding, calculating, bookkeeping or billing machines, typewriters, or similar equipment. [47 CFR… (Read More →)

data protection

The implementation of administrative, technical, or physical measures to guard against the unauthorized access to data. [2382-pt.8]

data reconstitution

A method of data restoration by assembling data from components available from alternative sources. [After 2382-pt.8]

data restoration

The act of regenerating data that have been lost or contaminated.
Note: Methods include copying data from archive, data reconstitution from alternative sources, or data reconstruction from source data. [2382-pt.8]

data scrambler

A device used in digital transmission systems to convert digital signals into a pseudorandom sequence that is free from long strings of simple patterns, such as marks and spaces.
Note: The data scrambler facilitates timing extraction, reduces the accumulation of jitter, and prevents baseline drift.

data security

[The] protection of data from unauthorized (accidental or intentional) modification, destruction, or disclosure. [INFOSEC-99]

data separation

The application of encryption as a means of access control. [After X9.69]

data service unit (DSU)

1. A device used for interfacing data terminal equipment (DTE) to the public telephone network.
2. A type of short-haul, synchronous-data line driver, usually installed at a user location, that connects user synchronous equipment over a 4-wire circuit at a preset transmission rate to a servicing central office.
Note: This service can be for a point-to-point or multipoint operation in… (Read More →)

data signaling rate (DSR)

The aggregate rate at which data pass a point in the transmission path of a data transmission system.
Note 1: The DSR is usually expressed in bits per second.
Note 2: The data signaling rate is given by where m is the number of parallel channels, ni is the number of significant conditions of the modulation in the I-th channel,… (Read More →)

data station

Data terminal equipment (DTE), data circuit-terminating equipment (DCE), and any intermediate equipment connected at one location.
Note: The DCE may be connected directly to a data processing system or it may be a part of the data processing system.

data stream

A sequence of digitally encoded signals used to represent information in transmission.

data subscriber terminal equipment

In the DDN, a general purpose terminal device that consists of (a) all the equipment necessary to provide interface functions, perform code conversion, and transform messages on various data media, such as punched cards, magnetic tapes, and paper tapes, to electrical signals for transmission and (b) all the equipment necessary to convert received electrical signals into data stored or recorded… (Read More →)

data switching exchange (DSE)

The equipment installed at a single location to perform switching functions such as circuit switching, message switching, and packet switching.

data template

A specified logical structure for a collection of data objects, including allowable ranges for their values and other data consistency specifications. [T1.667-1999]

data transfer device

[A] fill device designed to securely store, transport, and transfer electronically both COMSEC and TRANSEC key, designed to be backward compatible with the previous generation of COMSEC common fill devices, and programmable to support modern mission systems. [INFOSEC-99]

data transfer rate

The average number of bits, characters, or blocks per unit time passing between corresponding equipment in a data transmission system.

data transfer request signal

A call control signal transmitted by the data circuit-terminating equipment (DCE) to the data terminal equipment (DTE) indicating that a request signal, originated by a distant DTE, has been received from a distant DCE to exchange data with the station.

data transfer time

The time between (a) the instant at which a user data unit, such as a character, word, block, or message, is made available to a network for transfer by a transmitting data terminal equipment (DTE) and (b) the receipt of that complete data unit by a receiving DTE.

data transmission

The sending of data from one place to another by means of signals over a channel.

Data Transmission (107 Type) Test Line

The term "Data Transmission (107 Type) Test Line" denotes an arrangement which provides for a connection to a signal source which provides test signals for one-way testing of data and voice transmission parameters.

data transmission circuit

The transmission media and the intervening equipment used for the transfer of data between data terminal equipments (DTEs).
Note 1: A data transmission circuit includes any required signal conversion equipment.
Note 2: A data transmission circuit may transfer information in (a) one direction only, (b) either direction but one way at a time, or (c) both directions simultaneously.

data unit

A single kind of data for which the identification and description are identical for all occurrences. It may be a data element or a data composite. [T1.238-1994/97]

data validation

A process used to determine if data are accurate, complete, or meet specified criteria. [2382-pt.8]

data volatility

Pertaining to the rate of change in the values of stored data over a period of time.

data-dependent protection

The application of protective data elements to a data stream in such a manner that the composition of the data stream determines the amount or type of protective elements to be added.

database

1. A set of data that is required for a specific purpose or is fundamental to a system, project, enterprise, or business.
Note: A database may consist of one or more data banks and be geographically distributed among several repositories.
2. A formally structured collection of data.
Note: In automated information systems, the database is manipulated using a database management… (Read More →)

database engineering

The discipline involving (a) the conception, modeling, and creation, i.e., programming, of a database, (b) data analysis and administration of the database, and (c) database documentation.

database management system (DBMS)

A software system that facilitates (a) the creation and maintenance of a database or databases, and (b) the execution of computer programs using the database or databases.

datagram

In packet switching, a self-contained packet, independent of other packets, that contains information sufficient for routing from the originating data terminal equipment (DTE) to the destination DTE without relying on prior exchanges between the equipment and the network.
Note: Unlike virtual call service, when datagrams are sent there are no call establishment or clearing procedures. Thus, the network may not… (Read More →)

date

An instant in the passage of time, identified with desired precision by a clock and a calendar.
Note: An example of a date is 23 seconds after 3:14 PM on February 9,
192
6. This date might be represented as 1926FEB09151
4. 23.

date-time group (DTG)

In a message, a set of characters, usually in a prescribed format, used to express the day of the month, the hour of the day, the minute of the hour, the time zone, and the year.
Note 1: The DTG is usually placed in the header of the message.
Note 2: The DTG may be used as a message identifier… (Read More →)

dating format

The format used to express the time of an event.
Note: The time of an event on the UTC time scale is given in the following sequence: hour, day, month, year; e.g., 0917 UT, 30 August
199
7. The hour is designated by the 24-hour system.

dB

Abbreviation for decibel(s). One tenth of the common logarithm of the ratio of relative powers, equal to 0.1 B (bel).
Note 1:
The decibel is the conventional relative power ratio, rather than the bel, for expressing relative powers because the decibel is smaller and therefore more convenient than the bel. The ratio in dB is given by where P1 and… (Read More →)

dB(A)

dB of sound volume in relation to 20 micropascal weighted, simulating human ear sensitivity at 40 phon level.
Note 1: 20 micropascal is the human hearing threshold, i.e., 0 dB(A).
Note 2: Sound volumes louder than dB(A) are represented by a graduated scale: dB(B), dB(C), and dB(D).
Note 3: This scale is widely used in occupational safety and hearing protection… (Read More →)

dBa

Abbreviation for decibels adjusted. Weighted absolute noise power, calculated in dB referenced to
3. 16 picowatts (-85 dBm), which is 0 dBa.
Note: The use of F1A-line or HA1-receiver weighting must be indicated in parentheses as required. A one-milliwatt, 1000-Hz tone will read +85 dBa, but the same power as white noise, randomly distributed over a 3-kHz band (nominally 300… (Read More →)

dBa(F1A)

Weighted absolute noise power in dBa, measured by a noise measuring set with F1A-line weighting.
Note: F1A weighting is no longer used for DOD applications.

dBa(HA1)

Weighted noise power in dBa, measured across the receiver of a 302-type or similar subscriber set, by a noise measuring set with HA1-receiver weighting.
Note: HA1 weighting is no longer used in DOD applications.

DBA-NSR

Dynamic Bandwidth Algorithm - Non-Status Reported

DBA-SR

Dynamic Bandwidth Algorithm - Status Reported

dBa0

Noise power in dBa referenced to or measured at zero transmission level point (0TLP), also called a point of zero relative transmission level (0 dBr).
Note: It is preferred to convert noise readings from dBa to dBa0, as this makes it unnecessary to know or state the relative transmission level at the point of actual measurement.

dBc

Abbreviation. dB relative to the carrier power.

dBi

Abbreviation. In the expression of antenna gain, the number of decibels of gain of an antenna referenced to the zero dB gain of a free-space isotropic radiator.

dBm

Abbreviation. dB referenced to one milliwatt.
Note 1: dBm is used in communication work as a measure of absolute power values. Zero dBm equals one milliwatt.
Note 2: In DOD practice, unweighted measurement is normally understood, applicable to a certain bandwidth, which must be stated or implied.
Note 3: In European practice, psophometric weighting may be implied, as indicated by… (Read More →)

dBm(psoph)

Noise power in dBm, measured with psophometric weighting where where pWp is power in picowatts psophometrically weighted and dBa is the weighted noise power in dB referenced to
3. 16 picowatts.

dBm0

Power in dBm referred to or measured at a zero transmission level point (0TLP).
Note 1: A 0TLP is also called a point of zero relative transmission level (0 dBr0).
Note 2: Some international documents use dBm0 to mean noise power in dBm0p (psophometrically weighted dBm0). In the United States, dBm0 is not so used.

dBm0p

Noise power in dBm0, measured by a psophometer or noise measuring set having psophometric weighting.

dBmV

Abbreviation. dB referenced to one millivolt across 75 ohms.
Note: This reference is not equivalent to dBm; it is, in fact,
1. 33 × 10-5 milliwatts.

dBr

Abbreviation. The power ratio, expressed in dB, between any point and a reference point selected as the zero relative transmission level point.
Note: Any power expressed in dBr does not specify the absolute power. It is a relative measurement only.

dBrn

Abbreviation. dB above reference noise.
Note 1: Weighted noise power in dB is referred to
1. 0 picowatt. Thus, 0dBrn = -90 dBm. Use of 144-line, 144-receiver, or C-message weighting, or flat weighting, must be indicated in parentheses as required.
Note 2: With C-message weighting, a one-milliwatt, 1000-Hz tone will read +90 dBrn, but the same power as white noise,… (Read More →)

dBrn(144-line)

Weighted noise power in dBrn, measured by a noise measuring set with 144-line weighting.

dBrn(f1-f2)

Flat noise power in dBrn, measured over the frequency band between frequencies f1 and f2.

dBrnC

Weighted noise power in dBrn, measured by a noise measuring set with C-message weighting.

dBrnC0

Noise power in dBrnC referred to or measured at a zero transmission level point (0TLP).

DBS

Abbreviation for direct broadcast satellite. The technology of rebroadcasting digital signals, via geosynchronous communications satellites, directly to the consumer; DBS technology allows consumers situated over a relatively large footprint to receive broadcasts (which, for all practical purposes, are now always digitally encoded) by using a small-aperture dish antenna.

dBu

Abbreviation. dB in reference to 1 mW at 600 ohms, equal to
0. 775 V, mainly used in audio systems (e.g., to measure audio levels in broadcasting as an audio reference) and in analog telephony. Also used in reference to
0. 775 V from low-impedance outputs and high impedance inputs.
Note: These are measurements of an audio voltage, not power.

dBv

Abbreviation. dB relative to 1 volt peak-to-peak.
Note: The dBv is usually used for television video signal level measurements. [From Weik '89]

dBW

Abbreviation. dB referenced to one watt.

dBx

Abbreviation. dB above reference coupling.
Note: dBx is used to express the amount of crosstalk coupling in telephone circuits. dBx is measured with a noise measuring set. [From Weik '89]

dc

Abbreviation for direct current.

dc patch bay

A patch bay in which dc circuits are grouped.

DCE

1. Abbreviation for data circuit-terminating equipment.
1. In a data station, the equipment that (a) performs functions, such as signal conversion and coding, at the network end of the line between the data terminal equipment (DTE) and the line, and (b) may be a separate or an integral part of the DTE or of intermediate equipment.
2. The interfacing equipment… (Read More →)

DCE clear signal

A call control signal transmitted by data circuit-terminating equipment (DCE) to indicate that it is clearing the associated circuit after a call is finished.

DCE waiting signal

A call control signal at the data-circuit-terminating-equipment/data-terminal-equipment (DCE/DTE) interface that indicates that the DCE is ready for another event in the call establishment procedure.

DceP

Data Center Productivity

DciE

Data Center Infrastructure Efficiency

DCOM

Abbreviation for distributed component object model. A model for developing objects in a language-independent format so that those objects can be communicated via a network as if they were on the same machine.

DDF

Disk Data Format

DDM

Data Description Method

DDNS

Dynamic Domain Name Service

de facto standard

A standard that is widely accepted and used, but lacks formal approval by a recognized standards organization.

DEA key

A 64-bit parameter consisting of 56 independent bits and 8 parity bits operating in concert as a data encryption algorithm key. [After X9.52]

dead link

A URL that leads to no existing document.
Note: An attempt to use a dead link usually results in a "404 Error" message. Dead links are usually the result of a machine name change, changes in server accounts, or network-connection failures. [Bahorsky]

dead sector

In facsimile, the interval between (a) the end of scanning of one object line and (b) the start of scanning of the following line.

dead space

The area, zone, or volume of space that is within the expected range of a radio, radar, or other transmitted signal but in which the signal is not detectable and therefore cannot be received. [From Weik '89]

deadlock

1. Unresolved contention for the use of a system or component. [From Weik '89]
2. In computer and data processing systems, an error condition such that processing cannot continue because each of two components or processes is waiting for an action or response from the other. [From Weik '89]
3. A permanent condition in which a system cannot continue to… (Read More →)

Dealer Numbering Pools

Numbers allocated by a service provider to a retail dealer for use in the sale and establishment of service on behalf of that service provider. See the definition of ”Intermediate Numbers” below (FCC 00-104, ¶ 20).

debug

To detect, trace, and eliminate mistakes.

deception repeater

A device that can (a) receive a signal, (b) amplify, delay, or otherwise manipulate the signal, and (c) retransmit it solely for creating deception. [From Weik '89]

decertification

[In security, the] Revocation of the certification of an information-system (IS) item or equipment for cause. [INFOSEC-99]

decipher

[To] convert enciphered text to the equivalent plain text by means of a cryptographic system. [INFOSEC-99]
Note: This does not include solution by cryptanalysis.

Decipherment

The reversal of a corresponding reversible encipherment [7498-2]

decision circuit

A circuit that measures the probable value of a signal element and makes an output signal decision based on the value of the input signal and a predetermined criterion or criteria.

decision instant

In the reception of a digital signal, the instant at which a decision is made by a receiving device as to the probable value of a signal condition. Synonym selection position.

decode

1. To convert data by reversing the effect of previous encoding.
2. To interpret a code.
3. [To] convert encoded text into plain text by means of a code. [INFOSEC-99]
Note: Decoding does not include deriving plain text by cryptanalysis.

decollimation

In a beam with the minimum possible ray divergence or convergence, any mechanism by which rays are caused to diverge or converge from parallelism.
Note 1: Decollimation may be deliberate for systems reasons, or may be caused by many factors, such as refractive index inhomogeneities, occlusions, scattering, deflection, diffraction, reflection, and refraction.
Note 2: Decollimation occurs in applications such as… (Read More →)

decompression

The reversal of the procedure conducted by the compression algorithm, which reversal returns [expands] the data to its original size and condition. [After Silicon]

decrypt

1. [A] generic term encompassing decode and decypher. [INFOSEC-99]
2. To convert encrypted text into its equivalent plain text by means of a cryptosystem. (This does not include solution by cryptanalysis. )
Note: The term "decrypt" covers the meanings of " decipher " and "decode. " [JP1-02]

dedicated circuit

A circuit designated for exclusive use by specified users.
Note: DOD normally considers a dedicated circuit to be between two users only.

dedicated mode

An information-system (IS) security mode of operation wherein each user with direct or indirect access to the system, its peripherals, remote terminals, or remote hosts, has all of the following: (a) a valid security clearance for all information within the system; (b) formal access approval and signed nondisclosure agreements for all the information stored and/or processed (including all compartments, subcompartments,… (Read More →)

dedicated security mode

A system operating in this mode is one whose users are all cleared for, need to know about and have access to all the data stored on and/or processed by it. See also: Multilevel Security Mode, System High Security Mode and Compartmented Security Mode [CESG].

dedicated service

In a communications system, a specified set of functions provided to designated users.
Note: Dedicated service is usually specified in a communications format, such as voice, digital data, facsimile, or video.

deemphasis

In FM transmission, the process of restoring (after detection) the amplitude-vs. -frequency characteristics of the signal.

deep linking

In hypertext systems, such as the World Wide Web, bypassing the main (home) page and linking directly to a subordinate page.

deep space

Space at distances from the Earth equal to or greater than 2 × 106 kilometers. [NTIA] [RR]

deeply depressed cladding fiber

An optical fiber construction, usually a single-mode fiber, that has an outer cladding of approximately the same refractive index as the core, and an inner cladding of very low (depressed) refractive index material between them.

default

Pertaining to the pre-defined initial, original, or specific setting, condition, value, or action a system will assume, use, or take in the absence of instructions from the user. [From Weik '89]

default ACL

An ACL which is used in determining the initial discretionary access control information for objects created within a directory [POSIX.6].

Defense Communications System (DCS)

Department of Defense long-haul voice, data, and record traffic system which includes the Defense Data Network, Defense Satellite Communications Systems, and Defense Switched Network.

Defense Data Network (DDN)

A component of the Defense Communications System used for switching Department of Defense automated data processing systems. [JP 1-02]

Defense Switched Network (DSN)

A component of the Defense Communications System that handles Department of Defense voice, data, and video communications.

definition

A figure of merit for image quality.
Note: In an image, definition is usually expressed in terms of the smallest resolvable element, such as lines per inch, or pels per square inch.

deflection

1. A change in the direction of a traveling particle, usually without loss of particle kinetic energy, representing a change in velocity without a change in the scalar speed of the particle.
2. A change in the direction of a wave, beam, electron, or other entity, such as might be accomplished by an electric or magnetic field.
Note: If the… (Read More →)

degauss

1. To remove a residual magnetic field from a magnetized object, usually by introducing much stronger and gradually diminishing magnetic fields of alternating polarity.
2. Specifically, to erase information from a magnetic storage medium by degaussing.

degaussing

[A] procedure that reduces the magnetic flux to virtual zero by applying a reverse magnetizing field. Synonymdemagnetizing. [INFOSEC-99]

degradation

1. The deterioration in quality, level, or standard of performance of a functional unit.
2. In communications, a condition in which one or more of the required performance parameters fall outside predetermined limits, resulting in a lower quality of service.
Note: Degradation is usually categorized as either "graceful" or "catastrophic. "

degraded minute (DM)

A 1-minute interval with a BER (bit error ratio) worse than 10:
6. The 1-minute intervals are derived by removing severely errored seconds from the total time and then consecutively grouping the remaining seconds into blocks of
6
0. [T1.507-1996]

degraded service state

The condition that exists when one or more of the required service performance parameters fall outside predetermined limits, resulting in a lower quality of service.
Note: A degraded service state is considered to exist when a specified level of degradation persists for a specified period of time.

degraded unit of time

A specified period of time during which bits are transferred from a source to a destination, where a bit error ratio worse than a specified threshold occurs. Severely errored units of time are excluded from the calculation. An example of a degraded unit of time is a degraded minute (DM). [T1.507-1996]

degree of coherence

A dimensionless unit, expressed as a ratio, used to indicate the extent of coherence of an electromagnetic wave such as a lightwave. [After 2196]
Note 1: For lightwaves, the magnitude of the degree of coherence is equal to the visibility, V, of the fringes of a two-beam interference test, as given by where Imax is the intensity at a maximum… (Read More →)

degree of isochronous distortion

In data transmission, the ratio of (a) the absolute value of the maximum measured difference between the actual and the theoretical intervals separating any two significant instants of modulation (or demodulation) to (b) the unit interval.
Note 1: These instants are not necessarily consecutive.
Note 2: The degree of isochronous distortion is usually expressed as a percentage.
Note 3: The… (Read More →)

degree of start-stop distortion

1. In asynchronous data transmission, the ratio of (a) the absolute value of the maximum measured difference between the actual and theoretical intervals separating any significant instant of modulation (or demodulation) from the significant instant of the start element immediately preceding it to (b) the unit interval.
2. The highest absolute value of individual distortion affecting the significant instants of… (Read More →)

dehop

To modify a frequency-hopping signal so that it has a constant center frequency.

dejitterizer

A device that reduces jitter in a digital signal.
Note 1: A dejitterizer usually consists of an elastic buffer in which the signal is temporarily stored and then retransmitted at a rate based on the average rate of the incoming signal.
Note 2: A dejitterizer is usually ineffective in dealing with low-frequency jitter, such as waiting-time jitter.

delay

1. The amount of time by which an event is retarded.
2. The time between the instant at which a given event occurs and the instant at which a related aspect of that event occurs.
Note 1: The events, relationships, and aspects of the entity being delayed must be precisely specified.
Note 2: Total delay may be demonstrated by the… (Read More →)

delay distortion

In a waveform consisting of two or more wave components at different frequencies, distortion caused by the difference in arrival times of the frequency components at the output of a transmission system. Synonymtime-delay distortion.

delay encoding

The encoding of binary data to form a two-level signal such that (a) a "0" causes no change of signal level unless it is followed by another "0" in which case a transition to the other level takes place at the end of the first bit period; and (b) a "1" causes a transition from one level to the other… (Read More →)

delay equalizer

A corrective network designed to make the phase delay or envelope delay of a circuit or system substantially constant over a desired frequency range.

delay line

1. A transmission line, or equivalent device, used to delay a signal.
2. A single-input-channel device, such as a single-input sequential logic element, in which the output channel state at a given instant, t, is the same as the input channel state at the instant t-n, where n is a number of time units, i.e., the input sequence undergoes a… (Read More →)

delay working

In telephone switchboard operations, operation intended to ensure fair distribution of the time of one or more lines among groups of call originators.

delayed-delivery facility

In a communications network, a facility that stores data, destined for delivery to one or more addresses, for delivery at a later time.

deleted bit

A bit not delivered to the intended destination.

deleted block

A block not delivered to the intended destination.

delimiter

Values which provide a means to identify the beginning and end of adjacent fields for mechanized systems, and to simplify overall code readability. While the specific values may differ from system to system, acceptable values are either an asterisk (*), virgule (/), or a period (. ).

Deliverable

An item produced or used during development of a system that is required to be made available to the evaluators for evaluation purposes.
Note: Includes support and access to computers [CESG].

delivered duplicated frame

A frame D received by a particular destination user when both of the following conditions are true: D was not generated by the source user; D is exactly the same as a frame that was previously delivered to that destination. [after T1.615-1992]

delivered errored frame

A delivered frame when the value of one or more bits in the frame is in error, or when some, but not all, bits in the frame are lost bits or extra bits (i.e., bits that were not present in the original signal). [After T1.615-1992]

delivered out-of-sequence frame

A delivered frame, Fi, that arrives at the destination user after any of the frames F(i+1), F(i+2), . . . Fn, assuming that F1 is transmitted first, F2, second, etc. [After T1.615-1992]

delivered overhead bit

A bit that (a) is successfully transferred to a destination user, (b) performs its primary function within the telecommunications system, and (c) does not represent user information.

delivered overhead block

A block that (a) is successfully transferred to a destination user, (b) performs its primary function within the telecommunications system, and (c) does not contain user information bits.

Delivery

The process whereby a copy of the Target of Evaluation is transferred from the developer to a customer [ITSEC].

delivery confirmation

Information returned to the originator indicating that a given unit of information has been delivered to the intended addressee(s).

Delivery Network Gateway

A device implementing the Delivery Network Gateway Function. The DNG may also be termed the RG (Residential Gateway) in other standards bodies.

Dellinger effect

An effect--lasting from several minutes to several hours--that causes electromagnetic sky wave signals to disappear rapidly as a result of greatly increased ionization in the ionosphere caused by increased noise from solar storms. Synonyms: Dellinger fadeout, Dellinger fading. [From Weik '89]

delta frame

In digital television technology, a video frame created from the preceding key frame by modifying only those pixels that have changed.
Note: The use of delta frames reduces (a) the data rate required to transmit a given number of video frames per second (frame rate), or (b) the storage capacity required to store multiple video frames. Synonym difference frame.

delta modulation (DM)

Analog-to-digital signal conversion in which (a) the analog signal is approximated with a series of segments, (b) each segment of the approximated signal is compared to the original analog wave to determine the increase or decrease in relative amplitude, (c) the decision process for establishing the state of successive bits is determined by this comparison, and (d) only the change… (Read More →)

delta-sigma modulation

Delta modulation in which the integral of the input signal is encoded rather than the signal itself.
Note: Delta-sigma modulation may be achieved by preceding a conventional delta-modulation encoder with an integrating network.

demand assignment

An operation in which several users share access to a communications channel on a real-time basis, i.e., a user needing to communicate with another user on the same network requests the required circuit, uses it, and when the call is finished, the circuit is released, making the circuit available to other users.
Note: Demand assignment is similar to conventional telephone… (Read More →)

demand assignment multiple access (DAMA)

In a communications system, a technique for allocating use of bandwidth among multiple users, based on demand.
Note: DAMA can be implemented in many ways including TDM and FDM.

demand factor

1. The ratio of (a) the maximum real power consumed by a system to (b) the maximum real power that would be consumed if the entire load connected to the system were to be activated at the same time.
Note: The maximum real power is usually integrated over a specified time interval, such as 15 or 30 minutes, and is… (Read More →)

demand load

1. In general, the total power required by a facility.
Note: The demand load is the sum of the operational load (including any tactical load) and nonoperational demand loads. It is determined by applying the proper demand factor to each of the connected loads and a diversity factor to the sum total.
2. At a communications center, the power required… (Read More →)

demand service

In ISDN applications, a telecommunications service that establishes an immediate communication path in response to a user request made through user-network signaling.

Demarc Extension

The transmission path originating from the interface of the access provider's side of a telecommunications circuit Demarcation Point within a premise and ending at the termination point prior to the interface of the edge Customer Premises Equipment. This may include in-segment equipment, media converters and patch cords as required to complete the circuit's transmission path to the edge CPE. See… (Read More →)

demarcation point (demarc)

That point at which operational control or ownership of communications facilities changes from one organizational entity to another.
Note: The demarcation point is usually the interface point between customer-premises equipment and external network service provider equipment. Synonym network terminating interface.

democratically synchronized network

A mutually synchronized network in which all clocks in the network are of equal status and exert equal amounts of control on the others, the network operating clock pulse repetition rate being the mean of the natural (uncontrolled) clock pulse repetition rates of the population of clocks.

demodulation

The recovery, from a modulated carrier, of a signal having substantially the same characteristics as the original modulating signal.

demultiplexing

The separation of two or more channels previously multiplexed; i.e., the reverse of multiplexing.

denial of service (DoS)

1. The prevention of authorized access to resources or the delaying of time-critical operations. [2382-pt.8]
2. The result of any action or series of actions that prevents any part of an information system (IS) from functioning. [INFOSEC-99]
3.
1. The unauthorized withholding of information or resources [CESG].
4. The prevention of legitimate access.
Note: This may result from either accidental… (Read More →)

dense binary code

A binary code in which all possible bit patterns that can be made from a fixed number of bits are used to encode user information but no overhead information.
Note: Examples of dense binary codes are (a) a pure binary representation for sexadecimal digits using all sixteen possible patterns and (b) an octal representation using all eight patterns. A binary… (Read More →)

dense wavelength division multiplexing (DWDM)

Multiplexing using close spectral spacing of individual optical carriers (wavelengths) to take advantage of desirable transmission characteristics (e.g., minimum dispersion or attenuation) within a given fiber, while reducing the total fiber count needed to provide a given amount of information-carrying capacity. [FAA]

density

1. In a facsimile system, a measure of the light transmission or reflection properties of an area of an object.
Note 1: Density is usually expressed as the logarithm to the base 10 of the ratio of incident to transmitted or reflected irradiance.
Note 2: There are many types of density, such as diffuse, double diffuse, and specular density, each… (Read More →)

departmental security officer

The person responsible to the Permanent Head of a Government Department for establishing and enforcing Departmental Security policy; this includes the application of minimum standards of security and system accreditation [CESG].

departure angle

The angle between the axis of the main lobe of an antenna pattern and the horizontal plane at the transmitting antenna. Synonymtakeoff angle.

dependency

In security, a relationship between requirements such that one requirement must be satisfied before others can meet their own objectives.

depolarization

1. Reducing or randomizing the polarization of an electromagnetic wave.
Note: Depolarization may be caused by transmission through a nonhomogeneous medium or a depolarizer.
2. Prevention of polarization in an electric cell or battery.

deregulation

A reduction in regulation of (a) tariffs, (b) market entry and exit, and/or (c) facilities in public telecommunication services.

derivation key

A double-length key used to compute another key cryptographically.
Note: The derivation key is normally used (in receiving a transaction) to derive or decrypt the transaction keys used by a great number of originating terminals. [After X9.24]

derived unique key per transaction (DUKPT)

In cryptography, a key-management technique that uses a unique key for each separate transaction to prevent the disclosure of any past key used by the transaction-originating tamper-resistant security mode (TRSM).
Note: The unique transaction keys are derived from a base derivation key using only non-secret data transmitted as part of each transaction. [After X9.24]

descrambler

The inverse of a scrambler.
Note: The descrambler output is a signal restored to the state that it had when it entered the associated scrambler, provided that no errors have occurred.

Descriptor

An internal representation which uniquely identifies data objects [POSIX.6].

desensitation

The reduction of desired signal gain as a result of receiver reaction to an undesired signal.
Note: The gain reduction is generally due to overload of some portion of the receiver (e.g., the AGC circuitry) resulting in desired signal suppression because the receiver will no longer respond linearly to incremental changes in input voltage.

design margin

The additional performance capability above required standard basic system parameters that may be specified by a system designer to compensate for uncertainties.

design objective (DO)

In communications systems, a desired performance characteristic for communications circuits and equipment that is based on engineering analyses, but (a) is not considered feasible to mandate in a standard, or (b) has not been tested.
Note 1: DOs are used because applicable systems standards are not in existence.
Note 2: Examples of reasons for designating a performance characteristic as a… (Read More →)

Design, Verify and Assign (DVA)

Describes a given point in the order completion process in which the circuit design is checked for accuracy and all assignments are verified/available.

desktop publishing

The use of computers and associated application software to compose, lay out, model, and develop prototypes of documents that are usually intended to be produced and distributed in some non-interactive medium, usually paper, but including film or other multimedia formats.
Note: Unlike electronic publishing, desktop publishing almost always results in some form of hard copy.

desktop video

The application of nondedicated personal computers to the performance of video auditioning (viewing) or editing.
Note: For desktop video teleconferencing, see video teleconference.

despun antenna

In a rotating communications satellite, an antenna with a main beam that is continuously redirected with respect to the satellite so that the antenna illuminates a given area on the surface of the Earth, i.e., the footprint does not move with respect to the Earth.
Note: An antenna may be despun mechanically or electrically.

destination node

A node having the network address, as determined by the release node, to be where an existing call should be routed. The destination node may or may not be a Signaling System 7 signaling point. [After T1.661-1997]

destination routing

In communications system operations, the routing of messages based on the name of the destination office, the destination user, or the address on the message, i.e., the addressee. [From Weik '89]

destination user

In an information transfer transaction, the user that receives information from the source, i.e., from the originating user.

desynchronizer

That portion of a network element (NE) that attempts to recreate a signal's original clock and attenuates the high-frequency phase variations that result from this process. Typically, the desynchronizer follows a demultiplex operation. [T1.10
5. 03-1994]

detailed design

A phase of the Development Process wherein the top level definition and design of a Target of Evaluation is refined and expanded to a level of detail that can be used as a basis for implementation [ITSEC].

detection

1. The recovery of information from an electrical or electromagnetic signal.
Note: Conventional radio waves are usually detected by heterodyning, i.e., coherent reception/detection. In this method of reception/detection, the received signal is mixed, in some type of nonlinear device, with a signal from a local oscillator, to produce an intermediate frequency, i.e., beat frequency, from which the modulating signal is… (Read More →)

detectivity

The reciprocal of noise equivalent power.

detector

1. A device that is responsive to the presence or absence of a stimulus.
2. In an AM radio receiver, a circuit or device that recovers the signal of interest from the modulated wave.
Note: In FM reception, a circuit called a discriminator is used to convert frequency variations to amplitude variations.
3. In an optical communications receiver, a device… (Read More →)

deterministic routing

1. In a switched network, switching in which the routes between given pairs of nodes are pre-programmed, i.e., are determined, in advance of transmission.
Note: The routes used to complete a given call through a network are identified, in advance of transmission, in routing tables maintained in each switch database. The tables assign the trunks that are to be used… (Read More →)

deterministic transfer mode

An asynchronous transfer mode in which the maximum information transfer capacity of a telecommunication service is provided throughout a call.

Developer

The person or organization that manufacturers a Target of Evaluation [ITSEC].

developer security

The physical, procedural and personnel security controls imposed by a developer on his Development Environment [ITSEC].

development environment

1. The set of procedures, methods, tools and standards used during system development. See also: Operational Environment [CESG].
2. The organizational measures, procedures and standards used whilst constructing a Target of Evaluation [ITSEC].

development process

The set of phases and tasks whereby a Target of Evaluation is constructed, translating requirements into actual hardware and software [ITSEC].

deviation ratio

In a frequency modulation system, the ratio of the maximum frequency deviation of the carrier to the maximum modulating frequency of the system under specified conditions.

device certificate

In cryptography, a public key certificate or an attribute certificate, issued by a device manufacturer, tying the identity of the device to its attributes. [After X9.45]

device driver

Software that interfaces a computer with a specific peripheral device, e. g. a videodisk player or a printer.

Device Profile

Device specific information which identifies the capabilities of a device. This can include information on embedded applications and firmware as well as device configuration and ideally contains information on upgrades, updates and version numbers to applications or physical device accessory attachments. The device profile is used in the context of service convergence to define the parameters which affect QoE, transfer/concurrence… (Read More →)

Device-Based Hybrid (DBH) Location

A location technology that uses a mix of location methods available to the device including crowd-sourced Wi-Fi, Assisted Global Navigation Satellite System (A-GNSS), and handset-based sensors. It also includes an associated uncertainty estimate reflective of the quality of the returned location.

DFAST

Dynamic Feedback Arrangement Scrambling Technique

DFZ

Default Free Zone

DHCP

Dynamic Host Configuration Protocol

DHS

Department of Homeland Security

dHTML

Abbreviation for dynamic Hypertext Markup Language. A form of HTML used to create Web-page content that, as perceived by the viewer, appears to change each time it is viewed, without further interaction with the server.
Note: The Web-page content may use any of several technologies including CGI (computer graphics interface) scripts.

Di Group

A basic group of Pulse Code Modulation (PCM) channels assembled by Time Division Multiplex. In the United States it usually consists of 24 channels at
1. 544 Mbs.

diagnostic program

1. A program used to investigate the cause or the nature of conditions or problems within specified elements of a system.
2. A computer program that detects, locates, or identifies a fault in equipment, an error in input data, or an error in a computer program.

dial mode

Operation of data circuit-terminating equipment (DCE) so that circuitry, such as data terminal equipment (DTE), associated with call origination is directly connected to a communications channel.

dial pulse

A dc pulse produced by an end instrument that interrupts a steady current at a sequence and rate determined by the selected digit and the operating characteristics of the instrument.

dial pulsing

Pulsing in which a direct-current pulse train is produced by interrupting a steady signal according to a fixed or formatted code for each digit and at a standard pulse repetition rate.
Note: Dial pulsing originated with rotary mechanical devices integrated into telephone instruments, for the purpose of signaling. Subsequent applications use electronic circuits to generate dial pulses. Synonym pulsing.

dial service assistance (DSA)

A network-provided service feature, associated with the switching center equipment, in which services, such as directory assistance, call interception, random conferencing, and precedence calling assistance, are rendered by an attendant.

dial signaling

Signaling in which dual tone multifrequency (DTMF) signals or pulse trains are transmitted to a switching center.
Note 1: Rotary dials produce pulse trains. Keypads may produce either DTMF signals or pulse trains.
Note 2: Dial signaling traditionally refers to pulse trains only.

dial switching equipment

Switching equipment actuated by electrical impulses generated by a dial or key pulsing arrangement. [47 CFR Pt.36-A]

dial through

A technique, applicable to access circuits, that permits an outgoing routine call to be dialed by the PBX user after the PBX attendant has established the initial connection.

dial tone

A tone employed in a dial telephone system to indicate to the calling party that the equipment is ready to receive dial or tone pulses.

dial-around

Pertaining to long-distance services that require consumers to dial a long-distance provider's access code (or a "10-10" number) before dialing a long-distance number to bypass (to "dial around") the consumer's chosen long-distance carrier, usually to get a better rate. [After FCC]

dial-pulse period

One complete cycle of a dial pulse, consisting of fall time, break interval, rise time, and make interval. [T1.409-1996]

dial-pulse signaling

A method of transmitting a telephone address over a direct-current path. The dc current is interrupted at the transmitting end in a defined pattern representing a particular digit in a telephone number. The number of interruptions in the dc current specifies the address digit. [After T1.409-1996]

dial-tone delay

The time between the instant of going off-hook and the instant of receiving a dial tone.

dial-up

1. A service feature in which a user initiates service on a previously arranged trunk or transfers, without human intervention, from an active trunk to a standby trunk.
2. A service feature that allows a computer terminal to use telephone systems to initiate and effect communications with other computers.

dialed digits

Untranslated address information collected/received from the originating line/trunk. [T1.667-1999]

dialing

In a communications system, using a device that generates signals for selecting and establishing connections.
Note: The term dialing is often used to designate or refer to all calling devices used for inserting data to establish connections. [From Weik '89]

dibit

A group of two bits.
Note: The four possible states for a dibit are 00, 01, 10, and
1
1. Synonym diad.

dichroic filter

An optical filter that reflects one or more optical bands or wavelengths and transmits others, while maintaining a nearly zero coefficient of absorption for all wavelengths of interest.
Note: A dichroic filter may be high-pass, low-pass, band-pass, or band rejection.

dichroic mirror

A mirror used to reflect light selectively according to its wavelength.

dielectric

1. A substance in which an electric field may be maintained with zero or near-zero power dissipation, i.e., the electrical conductivity is zero or near zero.
Note 1: A dielectric material is an electrical insulator.
Note 2: In a dielectric, electrons are bound to atoms and molecules, hence there are few free electrons.
2. Pertaining to a substance that has… (Read More →)

dielectric lens

In the radio regime, a lens made of dielectric material that refracts radio waves in the same manner that an optical lens refracts light waves.

dielectric strength

1. Of an insulating material, the maximum electric field strength that it can withstand intrinsically without breaking down, i.e., without experiencing failure of its insulating properties.
Note: The theoretical dielectric strength of a material is an intrinsic property of the bulk material and is not dependent on the configuration of the material or the electrodes with which the field is… (Read More →)

dielectric waveguide

A waveguide that consists of a dielectric material surrounded by another dielectric material, such as air, glass, or plastic, with a lower refractive index.
Note 1: An example of a dielectric waveguide is an optical fiber.
Note 2: A metallic waveguide filled with a dielectric material is not a dielectric waveguide.

differential encoding

Encoding in which signal significant conditions represent binary data, such as "0" and "1", and are represented as changes to succeeding values rather than with respect to a given reference.
Note: An example of differential encoding is phase-shift keying (PSK) in which the information is not conveyed by the absolute phase of the signal with respect to a reference, but… (Read More →)

differential Manchester encoding

Encoding in which (a) data and clock signals are combined to form a single self-synchronizing data stream, (b) one of the two bits, i.e., "0" or "1", is represented by no transition at the beginning of a pulse period and a transition in either direction at the midpoint of a pulse period, and (c) the other is represented by a… (Read More →)

differential mode interference

1. Interference that causes a change in potential of one side of a signal transmission path relative to the other side.
2. Interference resulting from an interference current path coinciding with the signal path.

differential modulation

Modulation in which the choice of the significant condition for any signal element is dependent on the significant condition for the previous signal element.
Note: An example of differential modulation is delta modulation.

differential phase-shift keying (DPSK)

Phase-shift keying that is used for digital transmission in which the phase of the carrier is discretely varied (a) in relation to the phase of the immediately preceding signal element and (b) in accordance with the data being transmitted.

differential pulse-code modulation (DPCM)

Pulse-code modulation in which an analog signal is sampled and the difference between the actual value of each sample and its predicted value, derived from the previous sample or samples, is quantized and converted, by encoding, to a digital signal.
Note: There are several variations of differential pulse-code modulation.

differentiating network

A network, or circuit, that produces an output waveform that is the time derivative of the input waveform.
Note: Differentiating networks are used in signal processing, such as for producing short timing pulses from square waves.

diffraction

The deviation of an electromagnetic wavefront from the path predicted by geometric optics when the wavefront interacts with, i.e., is restricted by, a physical object such as an opening (aperture) or an edge.
Note: Diffraction is usually most noticeable for openings of the order of a wavelength. However, diffraction may still be important for apertures many orders of magnitude larger… (Read More →)

diffraction grating

An array of fine, parallel, equally spaced grooves ("rulings") on a reflecting or transparent substrate, which grooves result in diffractive and mutual interference effects that concentrate reflected or transmitted electromagnetic energy in discrete directions, called "orders," or "spectral orders."
Note 1:
The groove dimensions and spacings are on the order of the wavelength in question. In the optical regime, in… (Read More →)

diffraction limited

1. In optics, pertaining to a light beam in which the far-field beam divergence is equal to that predicted by diffraction theory.
2. In focusing optics, pertaining to a light beam in which the impulse response or resolution limit is equal to that predicted by diffraction theory. [After 2196]

diffraction region

In radio propagation, a region that is in the geometric shadow of an electromagnetic source, but into which propagation nonetheless takes place by virtue of the knife-edge effect described in Hygens' principle. [JSB]

diffuse reflection

Reflection from a rough or irregular surface which does not maintain the integrity of the incident wavefront.

digerati

Knowledgeable individuals at the forefront of Internet development and implementation. [Bahorsky]
Note: Derived from the word "literati. "

digest

1. In e-mail, a periodic mailing of a collection of messages compiled from a mailing list or interest group. [Bahorsky]
2. A command issued to a list server or to a list processor requesting that postings be delivered to a subscriber in summary form. [Bahorsky]

digit

A symbol, numeral, or graphic character that represents an integer.
Note 1: Examples of digits include any one of the decimal characters "0" through "9" and either of the binary characters "0" or "
1. "
Note 2: In a given numeration system, the number of allowable different digits, including zero, is always equal to the base (radix).

digit time slot

In a digital data stream, a time interval that is allocated to a single digit and that can be uniquely recognized and defined.

digital

Characterized by discrete states.

digital access and cross-connect system (DACS)

In communications systems, a digital system in which (a) access is performed by T-1 hardware architecture in private and public networks with centralized switching and (b) cross-connection is performed by D3/D4 framing for switching digital-signal-0 (DS-0) channels to other DS-0 channels.
Note: Modern digital access and cross-connect systems are not limited to the T-carrier system, and may accommodate high data… (Read More →)

digital access line

An access line composed of digital facilities, containing no analog sections, and having a digital interface at the local digital exchange office (DEO) and a digital interface at the end-user voice terminal, voiceband data terminal, PBX, or interconnecting network. [T1.508-1998]

digital alphabet

A coded character set in which the characters of an alphabet have a one-to-one relationship with their digitally coded representations.

digital cash (digicash)

A bank-issued number that can be used in place of cash for Internet transactions.
Note: The use of digital cash allows a vendor to check the validity of the transaction by contacting the issuing bank, but it does not allow additional information to be obtained about the buyer. [Bahorsky] Synonyms e-cash, electronic cash.

digital channel

A means for conveying information from one point to another in digital form. A digital channel may be implemented on a network composed of digital communications components. [T1.80
1. 04-1997]

digital circuit

A combination of two digital transmission channels permitting bidirectional digital transmission in both directions between two points, to support a single communication. [T1.206-1988]

digital circuit patch bay

A patch bay in which low-level digital data circuits can be patched, monitored, and tested.
Note: A digital circuit patch bay can be either "D" type (unbalanced) or "K" type (balanced).

digital combining

A method of interfacing digital data signals, in either synchronous or asynchronous mode, without converting the data into a quasi-analog signal.

digital computer

A computer that consists of one or more central processing units (CPUs), that is controlled by internally stored programs, and that stores and processes data in digital form.

digital crossconnect system (DCS)

A network element that is used to arrange lower level digital signals among higher level digital bit streams. For example, DS0s among DS1s, DS1s among DS3s, or DS3s among OC3s, etc. [After T1.217-1991]

digital data

1. Data represented by discrete values or conditions, as opposed to analog data.
2. Discrete representations of quantized values of variables, e.g., the representation of numbers by digits, perhaps with special characters and the "yyspace" character.

digital data service (DDS)

A generic description for synchronous digital transmission operating up to 64 kb/s. [T
1. Rpt39-1995]

digital data system (DDS)

1. A synchronous system providing for full-duplex, end-to-end transmission of digital data at the subrate data channel rates of
2. 4,
4. 8,
9. 6,
1
9. 2, 56 and 64 kb/s rates on dedicated private line and multipoint circuits. [After T
1. Rpt25-1993]

digital end office (DEO) complex

A complex that includes the DEO and all connected remote switching units (RSUs), remote digital terminals (RDTS) and optical network units (ONUs). [T1.508-1998]

digital envelope

In cryptosystems, data appended to a message, that allow the intended recipient to verify the integrity of the content of the message. [2382-pt.8]

digital error

An inconsistency between the digital signal actually received and the digital signal that should have been received.

digital exchange

An exchange that switches digital signals by means of digital switching. [T1.206-1988]

digital facsimile equipment

Facsimile equipment that digitally encodes the picture signal, i.e., encodes the baseband signal resulting from scanning the object.
Note: The facsimile equipment output may be either (a) analog, as defined by CCITT Group 3 protocol, or (b) digital, as defined by CCITT Group 4, STANAG 5000 Type I, and STANAG 5000 Type II protocols.

digital filter

A filter (usually linear), in discrete time, that is normally implemented through digital electronic computation.
Note: Digital filters differ from continuous time filters only in application. The parameters of digital filters are generally more stable than the parameters of commonly used analog (continuous) filters. Digital filters can be applied as optimal estimators. Commonly used forms are finite impulse response (FIR)… (Read More →)

digital fingerprint

1. A characteristic of a data item, such as a cryptographic checkvalue or the result of performing a one-way hash function on the data, that is sufficiently peculiar to the data item that it is computationally infeasible to find another data item that will possess the same characteristics [10181-1].
2. A characteristic of a data item, such as a cryptographic… (Read More →)

digital link

A means of digital transmission with specified characteristics between two points. [T1.206-1988]

digital loop carrier (DLC)

The equipment, including lines, that is used for digital multiplexing of telephone circuits, and that is provided by the network as part of the subscriber access.

digital loopback

A mechanism incorporated into a terminal or into equipment in the network whereby a duplex communication path may be connected back upon itself so that the digits sent on the transmit path are returned on the receive path. [After T1.206-1994]
Note: Loopback tests should be used only to check for circuit continuity and not for more subtle performance problems.

digital milliwatt

1. In digital telephony, a test signal consisting of eight 8-bit words corresponding to one cycle of a sinusoidal signal approximately 1 kHz in frequency and one milliwatt, rms, in power.
Note 1: The digital milliwatt is stored in ROM. A continuous signal of arbitrary length, i.e., an indefinite number of cycles, may be realized by continually reading out and… (Read More →)

digital modulation

1. The process of varying one or more parameters of a carrier wave as a function of two or more finite and discrete states of a signal.
2. The process by which some characteristic (frequency, phase, amplitude, or combinations thereof) of a carrier frequency is varied in accordance with a digital signal, e.g., one consisting of coded pulses or states.… (Read More →)

digital multiplex hierarchy

A hierarchy consisting of an ordered repetition of tandem digital multiplexers that produce signals of successively higher data rates at each level of the hierarchy.
Note 1: Digital multiplexing hierarchies may be implemented in many different configurations depending on (a) the number of channels desired, (b) the signaling system to be used, and (c) the bit rate allowed by the… (Read More →)

digital multiplexer

A device for combining several digital signals into an aggregate bit stream.
Note: Digital multiplexing may be implemented by interleaving bits, in rotation, from several digital bit streams either with or without the addition of extra framing, control, or error detection bits.

digital path

The whole of the means of transmitting and receiving a digital signal of specified rate between the two digital distribution frames (or equivalent) at which terminal equipment or digital exchanges will be connected. [T1.206-1988]

digital phase modulation

Modulation in which the instantaneous phase of the modulated wave is shifted between a set of predetermined discrete values in accordance with the significant conditions of the modulating signal.

digital phase-locked loop

A phase-locked loop in which the reference signal, the controlled signal, or the controlling signal, or any combination of these, is in digital form.

digital primary patch bay

A patch bay that provides (a) the first access of most local user digital circuits in a technical control facility and (b) patching, monitoring, and testing capabilities for both high-level and low-level digital circuits.

digital reference signal (DRS)

A digital representation of a 0-dBmO 1004-Hz analog sinusoid, such that it will be decoded into an analog signal equal in level to the analog signal obtained by decoding a digital milliwatt using the same decoder. [T1.508-1998]

Digital Rights Management (DRM)

A collection of technologies that technically enable the definition of and enforcement of secure content transportation as well as secure content licensing, including:

Protection and control of the viewing of content that is delivered over IP transport.
Rights management for the delivered content.

digital selective calling (DSC)

1. A synchronous system developed by the International Radio Consultative Committee (CCIR), used to establish contact with a station or group of stations automatically by means of radio. The operational and technical characteristics of this system are contained in CCIR Recommendation
49
3. [47CFR]
2. See selcall.

digital service unit (DSU)

A replacement for the modem in synchronous connections to the Internet, and which formats data for transmission.

digital signal (DS)

A signal in which discrete steps are used to represent information.
Note 1: In a digital signal, the discrete steps may be further characterized by signal elements, such as significant conditions, significant instants, and transitions.
Note 2: Digital signals contain m-ary significant conditions.

digital signal 0 (DS0)

1. In T-carrier, a basic digital signaling rate of 64 kb/s, corresponding to the capacity of one voice-frequency-equivalent channel.
Note 1: The DS0 rate forms the basis for the North American digital multiplex transmission hierarchy.
Note 2: The DS0 rate may support twenty
2. 4-kb/s channels, or ten
4. 8-kb/s channels, or five
9. 67-kb/s channels, or one 56-kb/s channel,… (Read More →)

digital signal 1 (DS1)

A digital signaling rate of
1. 544 Mb/s, corresponding to the North American and Japanese T1 designator.

digital signal 2 (DS2)

A digital signaling rate of
6. 312 Mb/s, corresponding to the North American and Japanese T2 designator.

digital signal 3 (DS3)

1. A digital signal rate of
4
4. 736 Mb/s, corresponding to the North American T3 designator.
2. A digital signaling rate of
3
2. 064 Mb/s, corresponding to the Japanese T3 designator.

digital signal 4 (DS4)

1. A digital signal rate of
27
4. 176 Mb/s, corresponding to the North American T4 designator.
2. A digital signaling rate of
9
7. 728 Mb/s, corresponding to the Japanese T4 designator.

digital signature

1. A cryptographic modification of data that provides: (a) origin authentication, (b) data integrity, and (c) signer nonrepudiation (when associated with a data unit and accompanied by the corresponding public-key certificate). [After X9.49]
2. [A] cryptographic process used to assure message originator authenticity, integrity, and nonrepudiation. Synonym electronic signature. [INFOSEC-99]

digital signature algorithm

[A] procedure that appends data to, or performs a cryptographic transformation of, a data unit. The appended data or cryptographic transformation allows reception of the data unit and protects against forgery, e.g., by the recipient. [INFOSEC-99]

Digital Signature Standard (DSS)

A 1994-approved specification (FIPS-186-1) ruling the use of a single technique for generating signatures using the Digital Signature Algorithm.

digital slip

In the reception of a digital data stream, the loss of a bit, or the insertion by the receiver of a bit that was not transmitted, because of a difference in the bit rates of the incoming data stream and the local clock.

digital speech interpolation (DSI)

1. In digital speech transmission, the use of periods of inactivity or constant signal level to increase the transmission efficiency by insertion of additional signals.
2. A process that takes advantage of inactive periods of a conversation to insert speech from other conversations and to remove silent periods. [T1.509-1995]

digital subscriber line (DSL)

In Integrated Services Digital Networks (ISDN), equipment that provides full-duplex service on a single twisted metallic pair at a rate sufficient to support ISDN basic access and additional framing, timing recovery, and operational functions.
Note: The physical termination of the DSL at the network end is the line termination; the physical termination at the customer end is the network termination.

digital switch

A switch that performs time-division-multiplexed switching of digitized signals.
Note 1: When used with analog inputs, analog-to-digital and digital-to-analog conversion are required. These functions may be performed by the digital switch.
Note 2: Implementation is accomplished by the interchange of time slots between input and output ports on a sequential basis under the direction of control systems. The control systems… (Read More →)

digital switching

Switching in which digitized signals are switched without converting them to or from analog signals.

digital synchronization

Synchronization based on the start of a transmitted digital data unit, such as a bit, character, block, or frame.

digital television (DTV)

Any technology, using any of several digital encoding schemes, used in connection with the transmission and reception of television signals. Depending on the transmission medium, DTV often uses some type of digital compression to reduce the required digital data rate. Except for artifacts of the compression, DTV is more immune (than analog television) to degradation in transmission, resulting in a… (Read More →)

digital test access unit (DTAU)

A generic term for the functions associated with accessing one or more channels within a digital signal for the purpose of testing. DTAU functionality may be embedded within a network element (NE) or may consist of stand-alone equipment. [T1.216-1998]

digital transmission group

A group of digitized voice or data channels or both with bit streams that are combined into a single digital bit stream for transmission over communications media.
Note: Digital transmission groups usually are categorized by their maximum capacity, not by a specific number of channels. However, the maximum digital transmission group capacity must be equal to or greater than the… (Read More →)

digital transmission system

A transmission system in which (a) all circuits carry digital signals and (b) the signals are combined into one or more serial bit streams that include all framing and supervisory signals.
Note: A-D/D-A conversion, if required, is accomplished external to the system.

digital video

A video (television) signal represented by computer-readable binary numbers that describe luminance levels as well as a finite set of colors.

digital voice transmission

Transmission of analog voice signals that have been converted into digital signals.
Note: An example of digital voice transmission is transmission of pulse-code modulated (PCM) analog voice signals.

digital watermark

An identification code or bit pattern integrated into multimedia data that aids copyright owners in identifying illegally distributed audio, video, or image data. [Bahorsky]

digitize

To convert an analog signal into a digital signal carrying equivalent information.

digitizer

1. A device that converts an analog signal into a digital representation of the analog signal.
Note: A digitizer usually samples the analog signal at a constant sampling rate and encodes each sample into a numeric representation of the amplitude value of the sample.
2. A device that converts the position of a point on a surface into digital coordinate… (Read More →)

digroup

1. Abbreviation for digital group. In telephony, a basic digital multiplexing group.
Note 1: In the North American and Japanese T-carrier digital hierarchies, each digroup supports 12 PCM voice channels or their equivalent in other services. The DS1 line rate (2 digroups plus overhead bits) is
1. 544 Mb/s, supporting 24 voice channels or their equivalent in other services.
Note… (Read More →)

DIP switch

A group of subminiature switches mounted in a package compatible with standard integrated-circuit sockets.
Note: DIP switches are usually composed of rocker or slide-type switches.

diplex operation

The sharing of one common element, such as a single antenna or channel, for transmission or reception of two simultaneous, independent signals on two different frequencies.
Note: An example of diplex operation is the use of one antenna for two radio transmitters on different frequencies.

diplexer

A three-port frequency-dependent device that may be used as a separator or a combiner of signals.
Note: Duplex transmission through a diplexer is not possible.

dipole antenna

Usually a straight, center-fed, one-half wavelength antenna.

dipulse coding

The coding of "1's" and "0's" in a message in which one full cycle of a square wave, i.e., a positive pulse followed by a negative pulse in the same bit period, is transmitted when the message bit is a "1" and nothing is transmitted when the bit is a "0", or vice versa.
Note: A dipulse signal can be… (Read More →)

direct access

1. The capability to obtain data from a storage device, or to enter data into a storage device, in a sequence independent of their relative positions by means of addresses that indicate the physical location of the data.
2. Pertaining to the organization and access method that must be used for a storage structure in which locations of records are… (Read More →)

direct address

In computing, an address that designates the storage location of an item of data to be treated as an operand.

direct bond

An electrical connection using continuous metal-to-metal contact between the members being joined.

direct call

A facility-handled call in which the network interprets the call request signal as an instruction to establish a connection based on previously designated user information.

Direct Cause

The Direct Cause is the immediate event, action, or procedure that triggered the reportable incident (i.e., what happened).

direct connect

1. In computer systems, a permanent communications link that connects directly to a mainframe computer through a terminal controller, usually at binary synchronous (bi-sync) transmission rates.
2. In computer systems, a temporary connection between a microcomputer, i.e., a desktop workstation, and a host bulletin board system or server.

direct current signaling (DX signaling)

In telephony, a method whereby the signaling circuit E & M leads use the same cable pair(s) as the voice circuit and no filter is required to separate the control signals from the voice transmission.

direct dialing service

A service feature that permits a user to place information concerning credit card calls, collect calls, and special billing calls into the public telephone network without operator assistance.

direct distance dialing (DDD)

A network-provided service feature in which a call originator may, without operator assistance, call any other user outside the local calling area.
Note 1: DDD extends beyond the boundaries of national public telephone networks.
Note 2: DDD requires more digits in the number dialed than are required for calling within the local area.

direct orbit

For a satellite orbiting the Earth, an orbit in which the projection of the satellite on the equatorial plane revolves about the Earth in the same direction as the rotation of the Earth.

direct ray

A ray of electromagnetic radiation that follows the path of least possible propagation time between transmitting and receiving antennas.
Note: The path of least propagation time is not always the shortest distance path.

direct recording

In facsimile systems, recording in which a visible record is produced, without subsequent processing, in response to received signals.

direct-buried cable

A communication cable manufactured or produced for the purpose of burial in direct contact with the earth.

direct-sequence spread spectrum

1. A system (a) for generating spread-spectrum transmissions by phase-modulating a sine wave pseudorandomly with a continuous string of pseudonoise code symbols, each of duration much smaller than a bit and (b) that may be time-gated, where the transmitter is keyed periodically or randomly within a specified time interval.
2. A signal structuring technique utilizing a digital code sequence having… (Read More →)

directed broadcast address

An Internet Protocol address that specifies "all hosts" on a specified network.
Note: A single copy of a directed broadcast is routed to the specified network, where it is broadcast to all terminals on that network.

directed net

A radio net in which no station other than the net control station may communicate with any other station without first obtaining permission from the net control station.
Note: A directed net is established by the net control station. The net control station may restore the net to a free net. [From Weik '89]

direction finding

A procedure for obtaining bearings of radio frequency emitters by using a highly directional antenna and a display unit on an intercept receiver or ancillary equipment. [JP1]

direction of scanning

In a facsimile transmitting apparatus, the scanning of the plane (developed in the case of a drum transmitter) of the message surface along lines running from right to left commencing at the top so that scanning commences at the top right-hand corner of the surface and finishes at the bottom left-hand corner; this is equivalent to scanning over a right-hand… (Read More →)

directional antenna

An antenna in which the radiation pattern is not omnidirectional, i.e., a nonisotropic antenna.

directional coupler

A transmission coupling device for separately sampling (through a known coupling loss) either the forward (incident) or the backward (reflected) wave in a transmission line.
Note: A directional coupler may be used to sample either a forward or backward wave in a transmission line. A unidirectional coupler has available terminals or connections for sampling only one direction of transmission; a… (Read More →)

directionalization

The temporary conversion of a portion or all of a two-way trunk group to one-way trunks favoring traffic flowing away from a congested switch.
Note: Adjacent nodes must cooperate to accomplish directionalization.

directive gain

1. Of an antenna, the ratio of (a) 4 times the radiance, i.e., power radiated per unit solid angle (watts per steradian), in a given direction to (b) the total power, i.e., the power radiated to 4 steradians.
Note 1: The directive gain is usually expressed in dB.
Note 2: The directive gain is relative to an isotropic antenna.
Note… (Read More →)

Directory Assistance Call Completion (DACC)

After the telephone number has been received, DACC is a service that permits a call to be completed to the requested number, typically at the calling party's option for an additional charge.

directory number

A network (sub)address (from a telephone user perspective) such as the telephone number in the telecommunication network. For the purpose of this configuration management model, the directory number is described in a managed object that contains references to other objects or attributes related to the services of subscribers. For service providers, the directory number is the key element used to… (Read More →)

directory server (DS)

A unit consisting of a DSA (directory system agent) and possibly other application processes (such as registration management) to provide the directory service with additional features such as automatic registration of a network element in a directory information tree (DIT). [After T1.245-1997]

directory system agent (DSA)

The software that provides the X.500 directory service for a portion of the directory information base.
Note: Generally, each DSA is responsible for the directory information for a single organization or organizational unit. [Bahorsky]

directory user agent (DUA)

The software that accesses the X.500 directory service on behalf of the directory user.
Note: The directory user may be a person or another software element. [Bahorsky]

Disabled

When applied to privilege: a privilege that is inactive, i.e., has its effective flag cleared [POSIX.6].

disabling tone

A tone, transmitted over a communications path, used to control equipment.
Note: An example of a disabling tone is a tone that places an echo suppressor in a nonoperative condition during data transmission over a telephone circuit.

disclosure

A violation of computer security whereby data have been made available to unauthorized entities. [2382-pt.8]

disconnect

In telephony, the disassociation or release of a switched circuit between two stations.

disconnect command (DISC)

In Link-Layer protocols, such as high-level data link control (HDLC), synchronous data link control (SDLC), and advanced data communication control procedure (ADCCP), an unnumbered command used to terminate the operational mode previously set.

disconnect signal

In a switched telephone network, a supervisory signal transmitted from one end of a user line or trunk to indicate at the other end that the established connection should be disconnected.

disconnect switch

In a power system, a switch used for closing, opening, or changing the connections in a circuit or system or for purposes of isolation.
Note: It has no interrupting rating and is intended to be operated only after the circuit has been opened by some other means, such as by a circuit breaker or variable transformer.

disconnect timing

The timing of the period during which a hang-up signal is being received from the called end office and an off-hook signal is being received from the calling end office. [T1.104-1991]

disconnect-control office

The switching entity that performs disconnect timing and that decides when the connection is to be cleared. It is usually the calling end office; however, it may be another switching entity such as an office performing centralized automatic message accounting (CAMA) or an operator service system. [T1.104-1988]

discretionary access control (DAC)

1. [A] means of restricting access to objects based on the identity and need-to-know of users and/or groups to which the object belongs. Controls are discretionary in the sense that a subject with a certain access permission is capable of passing that permission (directly or indirectly) to any other subject. Synonym surrogate access. [INFOSEC-99].
2. Access control based on access… (Read More →)

discriminator

The part of an FM receiver that extracts the desired signal from an incoming FM wave by changing frequency variations into amplitude variations.

disengagement attempt

An attempt to terminate a telecommunications system access.
Note: Disengagement attempts may be initiated by a user or the telecommunications system.

disengagement denial

After a disengagement attempt, a failure to terminate the telecommunications system access.
Note: Disengagement denial is usually caused by excessive delay in the telecommunications system.

disengagement failure

Failure of a disengagement attempt to return a communication system to the idle state, for a given user, within a specified maximum disengagement time.

disengagement originator

The user or functional unit that initiates a disengagement attempt.
Note 1: A disengagement originator may be the originating user, the destination user, or the communications system.
Note 2: The communications system may deliberately originate the disengagement because of preemption or inadvertently because of system malfunction.

disengagement phase

In an information transfer transaction, the phase during which successful disengagement occurs.
Note: The disengagement phase is the third phase of an information transfer transaction.

disengagement request

A control or overhead signal issued by a disengagement originator for the purpose of initiating a disengagement attempt.

disengagement time

1. The average value of elapsed time between the start of a disengagement attempt for a particular source or destination user and the successful disengagement of that user.
2. Elapsed time between the start of a disengagement attempt and successful disengagement.

disengagement-denial probability

The ratio of disengagement attempts that result in disengagement denial to the total disengagement attempts counted during a measurement period.

disk pack

An assembly of magnetic disks that can be removed as a whole from a disk drive together with a container from which the assembly must be separated when operating.

diskette

In computer technology, a small disk of flexible plastic, coated with a magnetizable material and enclosed in a protective jacket, used to store digital data.
Note: A diskette is distinguished from a hard disk by virtue of the fact that it is flexible, and unlike most hard disks, is removable from its drive. Synonyms flexible disk, floppy disk.

disparity

In pulse-code modulation (PCM), the digital sum, i.e., the algebraic sum, of a set of signal elements.
Note: The disparity will be zero and there will be no cumulative or drifting polarization if there are as many positive elements (those that represent 1) as there are negative elements (those that represent 0).

Dispatchable Location

A location delivered to the PSAP by a CMRS provider with a 911 call that consists of the street address of the calling party, plus additional information such as suite, apartment or similar information necessary to adequately identify the location of the calling party.

Dispatchable Location (DL)

A location delivered to the PSAP by a CMRS provider with a 911 call that consists of the street address of the calling party, plus additional information such as suite, apartment or similar information necessary to adequately identify the location of the calling party.

dispersion

Any phenomenon in which the velocity of propagation of an electromagnetic wave is wavelength dependent.
Note 1: In communication technology, "dispersion" is used to describe any process by which an electromagnetic signal propagating in a physical medium is degraded because the various wave components (i.e., frequencies) of the signal have different propagation velocities within the physical medium.
Note 2: In… (Read More →)

dispersion-limited operation

Operation of a communications link in which signal waveform degradation attributable to the dispersive effects of the communications medium is the dominant mechanism that limits link performance.
Note 1: The amount of allowable degradation is dependent on the quality of the receiver.
Note 2: In fiber optic communications, "dispersion-limited operation" is often confused with "distortion-limited operation. "

display device

An output unit that gives a visual representation of data.

dissolve

In television, video, or motion-picture programming or production, a process in which one scene is gradually faded out while simultaneously being replaced by another.

distinctive alerting

Special ringing or call-waiting tone patterns sent by the network to convey information to a customer installation (CI) about the called number, the calling number, or the status of an automatic call request. [T1.401-1998]

distinguished name

[A] globally unique identifier representing an individual's identity. [INFOSEC-99]

distinguishing identifier

Data which unambiguously distinguishes an entity in the authentication process. This [Recommendation | Part of this International Standard] requires that such an identifier be unambiguous at least within a security domain [10181-2].

distortion

1. In a system or device, any departure of the output signal waveform from that which should result from the input signal waveform's being operated on by the system's specified, i.e., ideal, transfer function.
Note: Distortion may result from many mechanisms. Examples include nonlinearities in the transfer function of an active device, such as a vacuum tube, transistor, or operational… (Read More →)

distortion-limited operation

The condition prevailing when distortion of a received signal, rather than its attenuated amplitude (or power), limits performance under stated operational conditions and limits.
Note: Distortion-limited operation is reached when the system distorts the shape of the waveform beyond specified limits. For linear systems, distortion-limited operation is equivalent to bandwidth-limited operation.

distributed application

A set of information processing resources distributed over one or more open systems which provides a well defined set of functionality to (human) users, to assist a given (office) task [ECMATR46].

distributed control

Control of a network from multiple points.
Note: Each point controls a portion of the network, using local information or information transmitted over the network from distant points.

distributed database

1. A database that is not entirely stored at a single physical location, but rather is dispersed over a network of interconnected computers.
2. A database that is under the control of a central database management system in which storage devices are not all attached to a common processor.

distributed network

A network structure in which the network resources, such as switching equipment and processors, are distributed throughout the geographical area being served.
Note: Network control may be centralized or distributed.

distributed processing

Data processing in which an integrated set of functions is performed within multiple, physically separated devices.

distributed switching

Switching in which many processor-controlled switching units are distributed, usually close to concentrations of users, and operated in conjunction with a host switch.
Note: Distributed switching provides improved communications services for concentrations of users remote from the host switch, and reduces the transmission requirements, i.e., the traffic, between such concentrations and the host switch.

distributed-queue dual-bus (DQDB) [network]

A distributed multi-access network that (a) supports integrated communications using a dual bus and distributed queuing, (b) provides access to local or metropolitan area networks, and (c) supports connectionless data transfer, connection-oriented data transfer, and isochronous communications, such as voice communications.

distribution

In ISDN applications, the use of broadband transmission of audio or video information to the user without applying any post-production processing to the information.
Note: "Distribution" is in contrast to "contribution. "

distribution amplifier

An active linear device that accepts, at its input port, one signal source (e.g., audio, video, or rf) and presents it, usually in lossless or amplified form, at two or more output ports.
Note: A distribution amplifier may also serve as an impedance-matching device.

distribution frame

In communications, a structure with terminations for connecting the permanent wiring of a facility in such a manner that interconnection by cross-connections may readily be made.

distribution service

In ISDN applications, a telecommunications service that allows one-way flow of information from one point in the network to other points in the network with or without user individual presentation control.

distributor

In data transmission, a device that accepts a data stream from one line and places a sequence of signals, one or more at a time, on several lines, thus performing a spatial multiplexing of the original stream.
Note: Examples of a distributor are (a) a mechanical unit with input to a rotor and output through many contacts wiped by the… (Read More →)

disturbance voltage

An unwanted voltage induced in a system by natural or man-made sources.
Note: In telecommunications systems, the disturbance voltage creates currents that limit or interfere with the interchange of information. An example of a disturbance voltage is a voltage that produces (a) false signals in a telephone, (b) noise in a radio receiver, or (c) distortion in a received signal.

dithering

1. Simulating a gray scale by using a group of pixels each capable of displaying only black and white.
2. A technique for varying raster color or intensity by illuminating and blanking pixels in patterns to produce a blurred transition from one color to another in a computer picture.
Note: Dithering is used to create a wide variety of patterns… (Read More →)

diurnal phase shift

The phase shift of electromagnetic signals associated with daily changes in the ionosphere.
Note 1: The major changes usually occur during the period of time when sunrise or sunset is present at critical points along the path.
Note 2: Significant phase shifts may occur on paths wherein a reflection area of the path is subject to a large tidal range.… (Read More →)

diversity

The property of being made up of two or more different elements, media, or methods.
Note: In communications, diversity is usually used to provide robustness, reliability, or security.

diversity combiner

A circuit or device for combining two or more signals carrying the same information received via separate paths or channels with the objective of providing a single resultant signal that is superior in quality to any of the contributing signals.

diversity factor

The ratio of the sum of the individual maximum demands of the various parts of a power distribution system to the maximum demand of the whole system.
Note: The diversity factor is always greater than unity.

diversity gain

In radio communications, the ratio of the signal field strength obtained by diversity combining to the signal strength obtained by a single path.
Note: Diversity gain is usually expressed in dB. [From Weik '89]

diversity reception

Radio reception in which a resultant signal is obtained by combining or selecting signals, from two or more independent sources, that have been modulated with identical information-bearing signals, but which may vary in their fading characteristics at any given instant.
Note 1: Diversity reception is used to minimize the effects of fading.
Note 2: The amount of received signal improvement… (Read More →)

diversity transmission

Radio communication using a reception technique in which a resultant signal is obtained by combining signals (a) that originate from two or more independent sources that have been modulated with identical information-bearing signals and (b) that may vary in their transmission characteristics at any given instant.
Note 1: Diversity transmission and reception are used to obtain reliability and signal improvement… (Read More →)

divestiture

The court-ordered separation of the Bell Operating Telephone Companies from AT&T.

DLR

Design Layout Report

DMCA

A U. S. Act that was signed into law by President Clinton on October 28,
199
8. It was designed to implement the treaties signed in December 1996 at the WIPO Geneva conference, but also contains additional provisions addressing related matters such as a ban on the circumvention of DRM technological measures used to control copyrightable works.

DMS

Digital Media Server

DN

Delivery Network

DNG

Delivery Network Gateway

DNGF

Delivery Network Gateway Function

DNS

Abbreviation fordomain name server, domain name system. A database of Internet names and addresses that translates the names to the official Internet Protocol numbers and vice versa; the distributed name-and-address mechanism used in the Internet. [After Bahorsky]

DOCSIS

Data Over Cable Service Interface Specifications

Documentation

The written (or otherwise recorded) information about a Target of Evaluation required for an evaluation. This information may, but need not, be contained within a single document produced for the specified purpose [ITSEC].

DOD master clock

The master clock to which time and frequency measurements for the U. S. Department of Defense are referenced, i.e., are traceable.
Note 1: The U. S. Naval Observatory master clock is designated as the DOD Master Clock.
Note 2: The U. S. Naval Observatory master clock is one of the two standard time and frequency references for the U. S.… (Read More →)

domain

1. The independent variable used to express a function.
Note: Examples of domains are time, frequency, and space.
2. In distributed networks, all the hardware and software under the control of a specified set of one or more host processors. [From Weik '89]
3. [A] unique context (e.g., access control parameters) in which a program is operating; in effect, the… (Read More →)

domain name

The conventional Internet name for a network or computer system, which name consists of a sequence of two or more groups of characters separated by periods; e.g., the "govinst. com" groups of characters in the host name "www. govinst. com", where the ". com" is the first-level domain name (or top-level domain name), and the "govinst" characters represent the second… (Read More →)

domain name server (DNS)

1. A server within the Internet network that performs translation between fully qualified domain names and IP addresses according to the domain name system. [2382-pt.35]
2. A server that retains the addresses and routing information for TCP/IP LAN users.

domain name system (DNS)

1. The set of databases that performs the correspondence between an IP address and the fully qualified domain name.
Note: The domain name system contains a kind of naming tree for IP addresses, hosts, and domains, identifying each Internet node unambiguously. [2382-pt.35]
2. The online distributed database system that (a) is used to map human-readable addresses into Internet Protocol (IP)… (Read More →)

domestic fixed public service

A fixed service, the stations of which are open to public correspondence, for radiocommunications originating and terminating solely at points all of which lie within [. . . the entire United States and certain other geographic areas as specified in 47CFR]. [47CFR]

Dominance

Term used to describe the relationship between security clearances and security classes or between different security classes. Access rights are normally only granted when a subject dominates an object; information flow is allowed only to a receiving object that dominates the source object [CESG]. See also: Lattice.

dominant mode

In a waveguide that can support more than one propagation mode, the mode that propagates with the minimum degradation, i.e., the mode with the lowest cutoff frequency.
Note: Designations for the dominant mode are TE10 for rectangular waveguides and TE11 for circular waveguides.

Dominate

1. An implementation-defined relation between the values of MAC labels or Information Labels which satisfies partial order algebraic property [POSIX.6].
2. Security level S1 is said to dominate security level S2 if the hierarchical classification of S1 is greater than or equal to that of S2 and the non-hierarchical categories of S1 include all those of S2 as a subset… (Read More →)

donor

The switch or network from which the subscriber has ported. If the subscriber has ported more than once, the first switch or network to release the subscriber is referred to as the original donor switch or donor network. The original donor switch is the switch to which the call will be routed in the absence of number portability information, as… (Read More →)

dopant

An impurity added to an optical medium to change its optical properties.
Note: Dopants are used in optical fibers to control the refractive index profile and other refractive properties of the fiber. [FAA]

doppler effect

The change in the observed frequency (or wavelength) of a wave, caused by a time rate of change in the effective path length between the source and the point of observation.

doppler shift

The degree of observed change in frequency (or wavelength) of a wave due to the doppler effect.

DOT

Department of Transportation

dot pitch

1. Of a monitor screen, the physical size (width) of an individual tristimulus optoelectronic element (e.g., phosphor triad, stripe triad, LCD element), usually expressed in millimeters (e.g., "
0. 28 mm dot pitch"), in the direction of scanning.
Note: The width of one tristimulus optoelectronic element determines the maximum resolution of a monitor screen.
2. Of a dot-matrix printer, the… (Read More →)

dotted decimal notation

The syntactic representation for a 32-bit integer that consists of four 8-bit numbers written in base 10 with periods (dots) separating them.
Note: The dotted decimal notation is used to represent IP addresses in the Internet. [2382-pt.35]

double length key

A cryptographic key having a length of 112 bits plus 16 parity bits. [After X9.24]

double modulation

Modulation in which (a) a subcarrier is modulated with an information-bearing signal and (b) the resulting modulated subcarrier is then used to modulate another carrier that has a higher frequency.

double resolution still image

A still image transmitted in the standardized video stream encoded to twice the horizontal and twice the vertical resolution as the previous motion video (i.e., full common intermediate format (FCIF) or 4*FCIF). This mode uses bit 5 "Hi-Res" bit. [After T1.80
0. 09-1995]

double-ended synchronization

For two connected exchanges in a communications network, a synchronization control scheme in which the phase error signals used to control the clock at one exchange are derived by comparison with the phase of the incoming digital signal and the phase of the internal clocks at both exchanges. Synonym double-ended control.

double-frequency shift keying (DFSK)

Frequency-shift keying in which two telegraph signals are multiplexed and transmitted simultaneously by frequency shifting among four frequencies.

double-sideband reduced carrier (DSB-RC) transmission

Transmission in which (a) the frequencies produced by amplitude modulation are symmetrically spaced above and below the carrier and (b) the carrier level is reduced for transmission at a fixed level below that which is provided to the modulator.
Note: In DSB-RC transmission, the carrier is usually transmitted at a level suitable for use as a reference by the receiver,… (Read More →)

double-sideband suppressed-carrier (DSB-SC) transmission

Transmission in which (a) frequencies produced by amplitude modulation are symmetrically spaced above and below the carrier frequency and (b) the carrier level is reduced to the lowest practical level, ideally completely suppressed.
Note: DSB-SC transmission is a special case of double-sideband reduced carrier transmission.

doubly clad fiber

A single-mode fiber that has two claddings.
Note 1: Each cladding has a refractive index that is lower than that of the core. Of the two claddings, inner and outer, the inner cladding has the lower refractive index.
Note 2: A doubly clad fiber has the advantage of very low macrobending losses. It also has two zero-dispersion points, and low… (Read More →)

down-converter

A device for performing frequency translation in such a manner that the output frequencies are lower in the spectrum than the input frequencies.

Downgrade

1. Change the security class of an object to one which does not dominate the original [CESG].
2. To change a MAC label or Information Label to a value that does not dominate the current label. Downgrade includes changing a label to value that is incomparable with the current label [POSIX.6].

downlink

1. A data link from a satellite or other spacecraft to a terrestrial terminal.
2. A data link from an airborne platform to a ground-based terminal.

download

To transfer a copy of a file residing on a remote computer to a user's computer.

downstream

1. In communications, the direction of transmission flow from the source toward the sink.
2. With respect to the flow of data in a communications path: at a specified point, the direction toward which data are received later than at the specified point.

downtime

The interval during which a functional unit is inoperable.

DPI

Digital Program Insertion

DPWS

Devices Profile for Web Services

dragging

The act of modifying all or part of the display on a monitor by selecting some object and moving the pointing device such that the displayed object moves in conjunction with the pointer. [T1.232-1996]

drift

A comparatively long-term change in an attribute or value of a system or equipment operational parameter.
Note 1: The drift should be characterized, such as "diurnal frequency drift" and "output level drift. "
Note 2: Drift is usually undesirable and unidirectional, but may be bidirectional, cyclic, or of such long-term duration and low excursion rate as to be negligible.

DRM

Digital Rights Management

drop

1. In a communications network, the portion of a device directly connected to the internal station facilities, such as toward a switchboard or toward a switching center.
2. The central office side of test jacks.
3. A wire or cable from a pole or cable terminus to a building.
4. To delete, intentionally or unintentionally, or to lose part of… (Read More →)

drop and insert

In a multichannel transmission system, a process that diverts (drops) a portion of the multiplexed aggregate signal at an intermediate point, and introduces (inserts) a different signal for subsequent transmission in the same position, e.g., time slot or frequency band, previously occupied by the diverted signal.
Note 1: Signals not of interest at the drop-and-insert point are not diverted.
Note… (Read More →)

drop channel operation

Operation in which one or more channels of a multichannel system are terminated, i.e., dropped, at an intermediate point between the end terminals of the system.

drop repeater

In a multichannel communications system, a repeater that has the necessary equipment for the local termination, i.e., the dropping, of one or more channels.

dropout

1. In a communications system, a momentary loss of signal.
Note: Dropouts are usually caused by noise, propagation anomalies, or system malfunctions.
2. A failure to read properly a binary character from data storage.
Note: A dropout is usually caused by a defect in the storage medium or by a malfunction of the read mechanism.
3. In magnetic tape, disk,… (Read More →)

drum factor

1. In facsimile systems in which drums are used, the ratio of drum length to drum diameter.
2. In facsimile systems in which drums are not used, the ratio of (a) the page width to (b) the page length divided by .

drum speed

In facsimile systems, the rotation rate of the facsimile transmitter or recorder drum.
Note: Drum speed is usually expressed in revolutions per minute.

DS-TE

Differentiated-Service - Traffic Engineering

DSA board

A local dial office switchboard at which are handled assistance calls, intercepted calls, and calls from miscellaneous lines and trunks. It may also be employed for handling certain toll calls. [47 CFR Pt.36-A]

DSB board

A switchboard of a dial system for completing incoming calls received from manual offices. [47CFR]

DSCP

Differentiated Services Code Point

DSLAM

1. Digital Subscriber Line Access Multiplexer,
2. Digital Subscriber Line Access Module.

DSM-CC

Digital Storage Media Command and Control

DSP

Abbreviation for digital signal processor. A specialized, programmable computer processing unit that is able to perform high-speed mathematical processing.
Note: A DSP is ideal for use in compression algorithms. [After Silicon]

DT

Direct Termination

DTCP

Digital Transmission Content Protection

DTD

Document Type Declaration

DTE

1. Abbreviation for data terminal equipment.
1. An end instrument that converts user information into signals for transmission or reconverts the received signals into user information.
2. The functional unit of a data station that serves as a data source or a data sink and provides for the data communication control function to be performed in accordance with link protocol.… (Read More →)

DTE clear signal

A call control signal sent by data terminal equipment (DTE) to initiate clearing.

DTE waiting signal

A call control signal, sent by the data-circuit-terminating-equipment/data-terminal-equipment (DCE/DTE) interface, that indicates that the DTE is waiting for a call control signal from the DCE.

DTH

Direct To Home

DTR

Data Terminal Ready

DTV

Digital Television

dual access

1. The connection of a user to two switching centers by separate access lines using a single message routing indicator or telephone number.
2. In satellite communications, the transmission of two carriers simultaneously through a single communication satellite repeater.

dual bus

A pair of parallel buses arranged such that the direction of data flow in one bus is opposite to the direction of data flow in the other bus.

dual control

In security systems, a process of using two or more separate individuals (or entities), operating together (but with split knowledge) to protect sensitive functions or information so that no single person is able to access or use the materials (such as a cryptographic key). [After X9.49]

dual diversity

The simultaneous combining of (or selection from) two independently fading signals, so that the resultant signal can be detected through the use of space, frequency, angle, time, or polarization characteristics.

dual homing

The connection of a terminal so that it is served by either of two switching centers.
Note: In dual homing, a single directory number or a single routing indicator is used.

dual in-line package (DIP)

An electronic package with a rectangular housing and a row of pins along each of two opposite sides.
Note: DIP packages may be used for integrated circuits, or for discrete components, such as resistors or toggle switches. An example of a DIP is a microcircuit package with two rows of seven vertical leads that is specially designed for mounting on… (Read More →)

dual seizure

The condition that occurs when, in both-way operation, two exchanges attempt to seize the same circuit at approximately the same time. [T1.110-1987] Synonymscall collision, glare[deprecated].

dual-homed host

A host computer that participates in two separate networks.
Note: A dual-homed host can provide security functions as a firewall. [2382-pt.35] Synonym dual-homed gateway.

dual-precedence message

A message that contains two precedence designations.
Note: Usually the higher precedence message is for all action addressees and the lower for all information addressees. [From Weik '89]

dual-use access line

A user access line normally used for analog voice communication, but which has special conditioning for use as a digital transmission circuit.

dub

1. A duplicate copy made in the same format from one recording medium to another.
2. See audio dubbing.

duct

1. In interfacility cabling, a conduit, which may be direct-earth buried or encased in concrete, used to enclose communications or power cables.
Note: For maximum resistance to rodent attack, direct-earth-buried conduit should have an outside diameter equal to or greater than 6 cm (
2. 25 in. ).
2. See atmospheric duct.

ducting

The propagation of radio waves within an atmospheric duct.

dumb terminal

An asynchronous terminal that (a) does not use a transmission control protocol and (b) sends or receives data sequentially one character at a time.
Note: Dumb terminals usually handle ASCII characters.

dummy load

A dissipative impedance-matched network, usually used at the end of a transmission line to absorb all incident energy.
Note: The dummy load usually converts the incident energy to thermal energy.

duobinary signal

A pseudobinary-coded signal in which a "0" ("zero") bit is represented by a zero-level electric current or voltage; a "1" ("one") bit is represented by a positive-level current or voltage if the quantity of "0" bits since the last "1" bit is even, and by a negative-level current or voltage if the quantity of "0" bits since the last "1"… (Read More →)

duplex cable

A fiber-optic cable that contains two optical fibers. [After FAA]

duplex operation

Operating method in which transmission is possible simultaneously, in both directions of a telecommunication channel. [NTIA] [RR]
Note 1: This definition is not limited to radio transmission.
Note 2: In general, duplex operation and semi-duplex operation require two frequencies in radiocommunication; simplex operation may use either one or two. Synonyms full-duplex operation, two-way simultaneous operation.

duplexer

In radar systems, a device that isolates the receiver from the transmitter while permitting them to share a common antenna.
Note 1: A duplexer must be designed for operation in the frequency band used by the receiver and transmitter, and must be capable of handling the output power of the transmitter.
Note 2: A duplexer must provide adequate rejection of… (Read More →)

duty cycle

1. In an ideal pulse train, i.e., one having rectangular pulses, the ratio of the pulse duration to the pulse period.
Note: For example, the duty cycle is
0. 25 for a pulse train in which the pulse duration is 1 s and the pulse period is 4 s.
2. The ratio of (a) the sum of all pulse durations… (Read More →)

DVB

Digital Video Broadcast

DVB TM-IPI

Digital Video Broadcast Technical Module-Internet Protocol Interface

DVB-C

Digital Video Broadcast-Cable

DVB-H

Digital Video Broadcast-Handheld (mobile)

DVB-HN

Digital Video Broadcast-Home Networking

DVB-RC

Digital Video Broadcasting - Return Channel

DVB-S

Digital Video Broadcast-Satellite

DVB-T

Digital Video Broadcast-Terrestrial

DVBSTP

Digital Video Broadcasting SD&S Transport Protocol

dvd

Abbreviation for digital versatile disk, formerly digital video disk. A disk, recorded with optical technology, that contains full-length (2-hour) motion pictures for viewing on a personal computer or on a TV screen (through a set-top box).
Note: A dvd drive can also be used to access data files on a CD or to play an audio CD-ROM or an audio… (Read More →)

dvi

Abbreviation for digital video interface. A standard for computer-generated multimedia text and graphics merged in video production.

DVR

Digital Video Recorder

dwell time

The period during which a dynamic process remains halted in order that another process may occur.

DX signaling unit

A duplex signaling unit that repeats "E" and "M" lead signals into a cable pair(s) via "A" and "B" leads. These signals are transmitted on the same cable pair(s) that transmit(s) the message.

dynamic arming/disarming

Enabling/disabling of a detection point by a service control function in the course of service control execution for a particular call/service attempt. [T1.667-1999]

dynamic range

1. In a system or device, the ratio of (a) a specified maximum level of a parameter, such as power, current, voltage, or frequency to (b) the minimum detectable value of that parameter.
Note: The dynamic range is usually expressed in dB.
2. In a transmission system, the ratio of (a) the overload level, i.e., the maximum signal power that… (Read More →)

dynamic variation

A short-term variation (as opposed to long-term drift) in the characteristics of power delivered to electrical equipment.
Note: Dynamic variations indicate a short-term departure from steady-state conditions.

dynamic window control

A procedure to modify the transmitter's transmit window in response to the user's perception of congestion conditions in the network. [T1.615-1992]

dynamically adaptive routing

In route determination for packet-switched networks, adaptive routing in which an algorithm is used that (a) automatically routes traffic around congested, damaged, or destroyed switches and trunks and (b) allows the system to continue to function over the remaining portions of the network.

dynamically created Web page

A Web page designed to deliver content to users based on information obtained from users, from cookies, or from choices made by users as they access and click through a particular site.

Showing 1–714 of 714 results

Show paginated results