Glossary:

ATIS Telecom Glossary

Search Keyword By: D

Select a term name to open its entry and any media references. Longer definitions end with a “Read More” link.

duct

1. In interfacility cabling, a conduit, which may be direct-earth buried or encased in concrete, used to enclose communications or power cables.
Note: For maximum resistance to rodent attack, direct-earth-buried conduit should have an outside diameter equal to or greater than 6 cm (
2. 25 in. ).
2. See atmospheric duct.

ducting

The propagation of radio waves within an atmospheric duct.

dumb terminal

An asynchronous terminal that (a) does not use a transmission control protocol and (b) sends or receives data sequentially one character at a time.
Note: Dumb terminals usually handle ASCII characters.

dummy load

A dissipative impedance-matched network, usually used at the end of a transmission line to absorb all incident energy.
Note: The dummy load usually converts the incident energy to thermal energy.

duobinary signal

A pseudobinary-coded signal in which a "0" ("zero") bit is represented by a zero-level electric current or voltage; a "1" ("one") bit is represented by a positive-level current or voltage if the quantity of "0" bits since the last "1" bit is even, and by a negative-level current or voltage if the quantity of "0" bits since the last "1"… (Read More →)

duplex cable

A fiber-optic cable that contains two optical fibers. [After FAA]

duplex operation

Operating method in which transmission is possible simultaneously, in both directions of a telecommunication channel. [NTIA] [RR]
Note 1: This definition is not limited to radio transmission.
Note 2: In general, duplex operation and semi-duplex operation require two frequencies in radiocommunication; simplex operation may use either one or two. Synonyms full-duplex operation, two-way simultaneous operation.

duplexer

In radar systems, a device that isolates the receiver from the transmitter while permitting them to share a common antenna.
Note 1: A duplexer must be designed for operation in the frequency band used by the receiver and transmitter, and must be capable of handling the output power of the transmitter.
Note 2: A duplexer must provide adequate rejection of… (Read More →)

duty cycle

1. In an ideal pulse train, i.e., one having rectangular pulses, the ratio of the pulse duration to the pulse period.
Note: For example, the duty cycle is
0. 25 for a pulse train in which the pulse duration is 1 s and the pulse period is 4 s.
2. The ratio of (a) the sum of all pulse durations… (Read More →)

Showing 681–690 of 714 results