Glossary:

ATIS Telecom Glossary

Search Keyword By: D

Select a term name to open its entry and any media references. Longer definitions end with a “Read More” link.

degauss

1. To remove a residual magnetic field from a magnetized object, usually by introducing much stronger and gradually diminishing magnetic fields of alternating polarity.
2. Specifically, to erase information from a magnetic storage medium by degaussing.

degaussing

[A] procedure that reduces the magnetic flux to virtual zero by applying a reverse magnetizing field. Synonymdemagnetizing. [INFOSEC-99]

degradation

1. The deterioration in quality, level, or standard of performance of a functional unit.
2. In communications, a condition in which one or more of the required performance parameters fall outside predetermined limits, resulting in a lower quality of service.
Note: Degradation is usually categorized as either "graceful" or "catastrophic. "

degraded minute (DM)

A 1-minute interval with a BER (bit error ratio) worse than 10:
6. The 1-minute intervals are derived by removing severely errored seconds from the total time and then consecutively grouping the remaining seconds into blocks of
6
0. [T1.507-1996]

degraded service state

The condition that exists when one or more of the required service performance parameters fall outside predetermined limits, resulting in a lower quality of service.
Note: A degraded service state is considered to exist when a specified level of degradation persists for a specified period of time.

degraded unit of time

A specified period of time during which bits are transferred from a source to a destination, where a bit error ratio worse than a specified threshold occurs. Severely errored units of time are excluded from the calculation. An example of a degraded unit of time is a degraded minute (DM). [T1.507-1996]

degree of coherence

A dimensionless unit, expressed as a ratio, used to indicate the extent of coherence of an electromagnetic wave such as a lightwave. [After 2196]
Note 1: For lightwaves, the magnitude of the degree of coherence is equal to the visibility, V, of the fringes of a two-beam interference test, as given by where Imax is the intensity at a maximum… (Read More →)

degree of isochronous distortion

In data transmission, the ratio of (a) the absolute value of the maximum measured difference between the actual and the theoretical intervals separating any two significant instants of modulation (or demodulation) to (b) the unit interval.
Note 1: These instants are not necessarily consecutive.
Note 2: The degree of isochronous distortion is usually expressed as a percentage.
Note 3: The… (Read More →)

degree of start-stop distortion

1. In asynchronous data transmission, the ratio of (a) the absolute value of the maximum measured difference between the actual and theoretical intervals separating any significant instant of modulation (or demodulation) from the significant instant of the start element immediately preceding it to (b) the unit interval.
2. The highest absolute value of individual distortion affecting the significant instants of… (Read More →)

dehop

To modify a frequency-hopping signal so that it has a constant center frequency.

Showing 201–210 of 714 results